• 제목/요약/키워드: 전산소화

검색결과 32건 처리시간 0.03초

$CO_2$소화설비 방사시 정보저장장치의 저온손상에 관한 연구 (An Experimental Study on the Damage of the Data Process Equipment When $CO_2$ is Discharged)

  • 김영진;이수경;김종훈
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 1999년도 춘계 학술논문발표회 논문집
    • /
    • pp.115-120
    • /
    • 1999
  • 현재 소방법 기술기준 소방대상물 및 위험물별 소화설비의 적용성에 의하면 전산실, 전기실, 통신기기실에 모두 설치가 허용된 소화선비는 이산화탄소 소화설비, 할로겐화 소화설비 및 가스계 소화설비 뿐이다. 이러한 이유에서 불연성 가스인 이산화탄소 소화설비는 설치비용이 저렴하고 소화 후 증거 보존이 양호하고 그 청결성 등으로 인하여 화재의 소화뿐만 아니라 화재예방, 인화폭발의 예방에도 적당한 것으로서 많이 이용되고 있다. (중략)

  • PDF

항공기 엔진베이 내 소화장치 성능예측을 위한 전산해석방법 연구 (PREDICTION OF FIRE EXTINGUISH SYSTEM PERFORMANCE BY NUMERICAL METHOD)

  • 신훈범;서석주;정주현;유진복
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.426-430
    • /
    • 2010
  • There is fire dangers inside engine bay where fuel of oil leakge can be ignited by hot engine surfaces. So, Fire suppressor is needed to extinguish the flames. The current FAA requirement is that the concentration level should be greater than 6% by volume throughtout the protected zone for longer than a half second simultaneously. To Satisfy the FAA requirement, The Fire extinguish system should quickly delivery the fire extinguish agents and Fire extinguish system should be designed effectively. This study is to develop and simulate the injection of fire extinguish agents into the engine-bay. Transient simulations were performed and predicted the concentration of fire extinguish agents at the certain locatioin in the engine-bay.

  • PDF

다공성 알루미나 막을 이용한 사이클로헥산 탈수소화 반응의 전산모사 (Computer Simulatio of Dehydrogenation of Cyclohexane Using Alumina Membrane)

  • 문원석;박승빈;양승만
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 춘계 총회 및 학술발표회
    • /
    • pp.56-57
    • /
    • 1995
  • 막반응기는 반응물이나 생성물을 선택적으로 분리함으로써 반응과 분리를 동시에 수행한다. 이러한 막반응기는 주로 열역학적인 평형에 의해 전화율이 제약되는 반응의 전화율을 높이기 위해서 연구되어 왔다. 수소의 저장 방법의 하나인 액상 하이드라이드법에서 저장된 수소를 다시 분리해 내기 위해 사용되는 사이클로헥산의 탈수소화 반응에 대해 많은 연구가 이루어졌다. 그러나 앞선 연구자들의 결과는 막의 투과도가 낮아서 반응기의 performance가 투과율에 의해 결정된다고 보고하였다. 본 연구에서는 막의 투과도와 촉매 양의 변화에 따른 사이클로헥산 탈수소화 반응의 전화율 변화를 전산모사함으로써, 최적 혹은 최대의 전화율을 나타내는 투과도 및 촉매 양을 결정하는 방법을 제시한다.

  • PDF

선박기관구역 미분무수 소화설비 화재진압 성능 평가 (The Assessment of Fire Suppression Capability of Water-Mist System for Machinery Engine Room)

  • 최병일;한용식;오창보;김명배;김창
    • 한국화재소방학회논문지
    • /
    • 제21권2호
    • /
    • pp.111-117
    • /
    • 2007
  • IMO MSC/circ. 1165 규정에 따라 미분무수를 이용한 선박 기관구역($20m{\times}15m{\times}10m$)에서의 실물화재 소화실험을 수행하였다. K-factor 2.4인 노즐을 사용하였으며 작동압력은 80 bar이다. 미분무수의 화재진압 특성을 수치적으로 예측하기 위하여 FDS를 사용하여 실험과 같은 조건에서의 전산시뮬레이션을 수행하였다. 전산 시뮬레이션 결과 화재 전산 시뮬레이션 기법이 화재소화시간 예측에는 한계를 가지나, IMO MSC/circ. 1165 규정의 공간 내 온도분포 제어 성능의 예측을 위해서 유용하게 활용될 수 있음을 보였다.

미분무수 소화 노즐의 분무 특성 예측을 위한 CFD기법의 적용 (APPLICATION OF CFD TECHNIQUE TO PERFORMANCE PREDICTION OF SPRAY CHARACTERISTICS OF WATER-MIST FIRE SUPPRESSION NOZZLES)

  • 정희택;이창효;최병일;한용식;옥영욱
    • 한국전산유체공학회지
    • /
    • 제11권4호
    • /
    • pp.56-61
    • /
    • 2006
  • Numerical simulation has been performed to investigate the characteristics of the mist flow through the fire suppression nozzles. The commercial CFD software, FLUENT with the proper modeling was applied for analyzing both the internal and external flow of the spray nozzles. Computations were made for the full cone nozzle in the operation range of the low pressure and high flow-rate. To validate the present computational procedure, numerical results are compared with measurements in terms of K-factor, SMD, axial spray velocity and spray angles. Numerical results suggested that the present numerical model can be used as an adequate tool for a design purpose of mist-spray nozzles.

발전설비용 소화시스템의 성능 예측을 위한 CFD기법 적용 연구 (Application of CFD Method to Performance Prediction of Fire-Suppression System for Electric Power Utilities)

  • 정희택;배강열;김찬희;정인수;배진수;한용식;김종진
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.296-299
    • /
    • 2008
  • In the present research, the exclusive analysis system based on the CFD method were suggested to predict the fire-suppression performance of water mist fire-suppression equipments for design applications. The computing scope is ranged from starting pump to fire-suppression equipments, composed of three parts that calculation of flow rate and pressure distribution at each nozzle, examining of spray performance and predicting of fire-suppression performance in the fire space. Application were done to the fire-suppression system for electric power generation plants. The results were analyzed by comparison between numerical results and initial design conditions in terms of thermal and fluid mechanics.

  • PDF

고정식 소화장치 노즐조건에 따른 $CO_2 $전달특성 (The Characteristics of $CO_2 $ Extinguishant Transfer According to the Nozzle Conditions of a Fixed Eire System)

  • 박찬수;최주석;전철균
    • 한국화재소방학회논문지
    • /
    • 제18권2호
    • /
    • pp.41-48
    • /
    • 2004
  • 선박 기관실의 고정식 소화장치로 사용되는 $CO_2 $ 소화장치의 소화효과에 영향을 미칠 수 있는 인자 중 분사노즐위치를 변화시켜 이산화탄소 소화제 전달특성에 대한 전산모이실험을 3차원 비정상상태로 수행하였다. 노즐위치에 따라 유동장과 $CO_2$ 소화제 농도장을 계산하였다 소화제 분사노즐을 공간의 천장 중앙에 매치 한 경우, 천장에 형성되는 대칭 천장 제트가 대칭면에서 서로 부딪혀 저농도 하향 유동을 발생시켜 분사주위에는 규정농도 이하의 농도분포를 형성시킨다. 벽의 모서리에서는 소화제질량전달이 촉진되는 경향으로 인해 농도곡선은 모서리 부근에서 피크를 나타낸다.

$CO_2$소화제 노즐수에 따른 유동특성 및 소화제농도분포에 대한 연구 (A Study of the Characteristics of Flow and the Distribution of $CO_2$ Agent Concentration According to the Number of $CO_2$ Agent Nozzle)

  • 박찬수
    • 한국화재소방학회논문지
    • /
    • 제19권2호
    • /
    • pp.37-44
    • /
    • 2005
  • 가스계소화설비인 $CO_2$소화장치의 구성 중 $CO_2$노즐수에 따른 유동특성 및 $CO_2$소화제 농도분포를 분석하기 위하여 $CO_2$ 노즐수를 변화시키면서 전산모사실험을 3차원 비정상상태로 수행하였다. 실제 선박의 기관실을 방호공간으로 선정하여 유동장과 $CO_2$소화제 농도장을 계산하였다. $CO_2$소화제 노즐수를 2개에서 4개로 증가시킬 경우는 낮은 농도분포를 나타냈고, $CO_2$소화제 노즐수를 6개 이상으로 증가시킬 경우는 전 영역에 영향을 미치는 재순환 유동이 형성되었다. $CO_2$소화제 노즐수를 4개 이상 증가시킬 경우는 0.36이하의 등농도선대가 확장 또는 수축되었다. 따라서 $CO_2$ 소화장치 설계 시 적정한 소화제노즐수와 노즐배열을 고려해야 할 것으로 생각된다.

기관내 흡인으로 인한 저산소증 예방을 위한 중재 효과에 대한 메타분석 (Meta-Analysis on the Effectiveness of Interventions Applied to Preventing Endotracheal Suction-Induced Hypoxemia)

  • 오현수
    • 대한간호학회지
    • /
    • 제33권1호
    • /
    • pp.42-50
    • /
    • 2003
  • Purpose: This study was conducted to investigate the effects of the suction-induced hypoxemia interventions. Method: 30 suction-induced hypoxemia interventions were reviewed for the purpose of meta-analysis. Result: The study showed that both preoxygenation and insufflation were the most frequently examined oxygenation time periods, and hyperoxygenation combined with hyperinflation was the most commonly applied oxygenation method in order to prevent suction-induced hypoxemia. The greatest effect was obtained by providing oxygenation before and after suctioning, whereas negative effect(the contrary results from the study hypotheses) was frequently obtained by applying insufflation only. Applying hyperoxygenation combined with hyperinflation had the greatest effect over that of applying hyperoxygenation only, even though the difference between effect sizes of both methods were statistically significant. Conclusion: The results of meta-analysis showed that the occurrence rate of hypoxemia after suctioning was significantly reduced with the overall interventions for hypoxemia (decreasing 40% of occurrence rate), independent with time periods or methods for providing oxygenation.

$CO_2$소화제 노즐과 벽간 거리의 영향 (The Effect of the Distance Between $CO_2$ Agent Nozzle and Wall)

  • 박찬수
    • 한국화재소방학회논문지
    • /
    • 제18권4호
    • /
    • pp.27-34
    • /
    • 2004
  • CO₂소화장치의 CO₂노즐과 방호공간 내 벽 사이의 거리변화에 따른 유동 및 CO₂질량전달효과를 분석하기 위하여 CO₂노즐과 후측 벽 사이의 거리를 변화시키면서 전산모이실험을 3차원 비정상상태로 수행하였다. 유동장과 CO₂소화제 농도장을 계산하였다. CO₂노즐과 후측 벽 사이의 거리 증가에 따라 다른 재 순환 유동형태와 벽면제트기류가 형성되었다. CO₂ 소화제 질량전달은 모든 경우에서 각 벽으로부터 방호공간의 중앙으로 일어나지만 CO₂소화제 노즐의 전 후 영역의 CO₂질량분율은 CO₂노즐과 벽 사이의 거리 증가에 따라 높거나 낮게 나타났다.