• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.47-51
• /
• 2015

In this paper, feasibility of dynamic characteristics recovery of delaminated composite structure is numerically studied by using active control algorithm and piezoelectric actuator. Macro-fiber composite(MFC), which has great flexibility and high actuating force, is considered as an actuator in this work. After construction of finite element model for delaminated composite structure based on improved layerwise theory, modal characteristics are investigated and changes of natural frequencies and mode shapes, caused by delamination, are observed. Then, active control algorithm is realized and implemented to system model and control performances are numerically evaluated. Dynamic characteristics of delaminated composite structure are effectively recovered to those of healthy composite structure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.333-342
• /
• 2003

The objective of this paper is to present an algorithm to locate and size damage in a beam structure. The method uses the changes in the modal strain energy distribution. A damage index, utilized to identify possible location and corresponding severity of local damage, is formulated and expressed in terms of modal displacements that can be obtained from mode shapes of the undamaged and the damaged structures. The possible damage locations in the structure arc determined by the application of damage indicator according to previously developed decision rules. The robustness and effectiveness of the method arc demonstrated using numerical examples of beam structures with simulated damage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.255-263
• /
• 2014

In this paper, seismic fragility analysis of lightning arrester is performed using capacity spectrum method(CSM). Since seismic fragility analysis of structure with many structural members is required to calculate many inelastic responses for several tens or hundreds of ground motions, simple method such as CSM is more appropriate than response history analysis(RHA). In general, accuracy of seismic response evaluated by CSM is less than that by RHA. In order to increase accuracy of CSM, equivalent SDOF method and performance point calculation technique are applied to CSM. Seismic fragility method proposed by Shinozuka et al. is used. In order to evaluate site effect of ground motions on seismic fragility, 60 different site classification earthquakes are selected as input ground motions. From the seismic fragility curves of lightning arrester evaluated by CSM and RHA, it can be observed that the seismic fragility curves evaluated by CSM are very similar to those by RHA. Also, it can be observed that main seismic failure mode of lightning arrest is bushing breakage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.139-146
• /
• 2000

This paper presents a prototype for structural analysis and design system by use of the STEP concepts for the representation and exchange of information on framed steel structures, and also integrates the product model of steel structures of AP 230, geometric and topological information of Part 42, and detailed Finite Element Analysis information of Part 104 into an unified system. Thus, the STEP-based system makes engineering information more clearable and exchangeable between computer applications than any other conventional methods. This system may be further extended to incorporate other computer applications for detailed engineering and manufacturing information on steel structures.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1211-1212
• /
• 2015

일반적으로 마그네틱 코어(magnetic core)가 삽입되어 있는 구조의 변압기의 에너지 효율을 높이고 적절한 주파수 대역에서 작동시키기 위해서는서 자성체를 이용하여 eddy current를 줄여야 한다. 본 논문에서는 자성체의 적층 형태에 따라 어떻게 eddy current가 영향을 받는지에 대한 전자기적 전산모사를 실시하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.275-281
• /
• 2015

In this study, vertical motion of a Tuned Liquid Column Damper(TLCD) is measured by a variable voltage measurement system in the electric field and design parameters of the TLCD are determined. First, nonlinear damping term of the TLCD is replaced as the equivalent viscous damping term. The natural frequency and damping ratio of dynamic characteristics of the TLCD are verified. In addition, a novel liquid level measurement system is developed for measuring vertical motion of the TLCD. For the experimental achievement, experimental characterizations of natural frequency and damping ratio of the TLCD are undertaken utilizing the developed variable voltage sensing. Also, shake table testing is performed to determine the dynamic characteristics of the TLCD. As a result, the feasibility of the proposed liquid level measurement system is verified by comparison with the capacitive type wavemeter.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.226-229
• /
• 2009

굴삭기는 다양한 산업 분야에서 폭넓게 이용되고 있는 대표적인 장비임에도 불구하고 작업 환경은 매우 열악하여 굴삭 조종자는 각종 소음이나 진동, 분진에의 노출뿐만 아니라 산업재해의 위험성 또한 높다. 이러한 문제점들을 타개하기 위하여 현재 국내에서는 2006년부터 지능형굴삭시스템(Intelligent Excavating System)에 의한 자동화된 굴삭기의 개발을 위하여 연구를 진행 중에 있다. 자동화 굴삭시스템 구축에 있어서 센싱(sensing)을 통해 획득된 지형 및 주변 환경정보를 활용하여 숙련공의 휴리스틱스(heuristics)를 바탕으로 설계된 모듈을 통해 최적의 굴삭 작업 계획을 세우고, GUI (Graphic User Interface)를 제공하여 실시간 작업진행 상태 파악 및 모니터링(monitoring) 내용을 굴삭기 조종자와 공사 감독관에게 제공하는 Task Planning System의 개발은 생산성, 안전성, 작업의 품질 및 장비의 성능에도 지대한 영향을 미치며 자동화된 굴삭시스템을 개발함에 있어서 필수적으로 요구되어지는 핵심기술이다. 본 논문에서는 자동화 굴삭시스템을 위한 자동화 계획생성 시스템인 Task Planning System의 현재까지 진행된 연구 내용과 모니터링 및 작업에 대한 최소간섭을 위한 Task Planning System Interface를 소개한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.773-779
• /
• 2014

A qualitative and quantitative analysis on flame dynamics is required to model combustion instability characteristics in gas turbine lean premixed combustors. The current paper shows the flame transfer function modeling results using CFD(Computational Fluid Dynamics) techniques for the flame dynamics study. It is generally known that flame shapes determine the basic characteristics of the flame transfer function. The comparisons of the modeled flame shapes with the measured ones were made using the optimized heat transfer conditions. Modeling results of the flame transfer function show the close behaviors to the measured data with a reasonable accuracy if the flame geometry can be exactly captured.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.497-502
• /
• 2015

In this paper, a stress function-based approach was proposed to analyze the reduction of free-edge peeling stress in smart composite laminates using piezoelectric actuator under bending load. Electro-mechanically coupled governing equation was obtained by complimentary virtual work principle. The stress state was solved by the generalized eigenvalue procedure. The free-edge peeling stress of smart composite laminates was reduced by the piezoelectric actuation. The reduction rate of peeling stress in cross-ply composite laminate is larger than that in angle ply composite laminate.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.159-167
• /
• 2017

The purpose of this study is to accurately estimate the wind-induced responses of a tall building structure for using the estimated responses in the process of calculating the optimal force of an active control device. Kalman filter was used for the estimation process and a 3-storied model structure on a shaking table was tested for the verification of the estimation accuracy. The system matrices of the model were constructed based on the mode parameters obtained by the system identification. The estimated displacement matched up well with the measured one. Finally, the wind-induced responses of a real 39-storied building structure excited by the typhoon MUIFA were estimated.