• Anxiety and mood
• /
• v.19 no.2
• /
• pp.61-68
• /
• 2023

Objective : The purpose of this study was to investigate the associations between psychosocial factors and the mask-wearing behavior after deregulation of COVID-19 quarantine guidelines among adults in Korea. Methods : We collected data (345 subjects) from online questionnaire survey. The questionnaire included the Korean version of the Patient Health Questionnaire-9, the Korean version of fear of COVID-19 Scale, the Korean version of the Patient Health Questionnaire-15, Korean versions of the Perceived Stress Scale, and measurement tools adapted from previous studies for COVID-19 risk perception, social stigma, and appearance interest of subjects. We analysed data using SPSS version 23.0 for descriptive statistics, chi-square test, and logistic regression analysis. Results : People with cohabitant or mask-wearing tendency before COVID-19 pandemic had a higher rate of mask-wearing than those who were not. Subjects reporting higher level of social stigma (OR=1.154, 95% CI 1.049-1.270) and COVID-19 anxiety (OR=1.072, 95% CI 1.007-1.141) were more likely to report maskwearing behavior. Conclusion : From the results, appropriate intervention to those who fear social stigma and are anxious to the infectious diseases will be needed. Additionally, providing policies and guidelines that consider cohabitants and offering continuous education with information of disease to the public are also expected to helpful for recovery of daily life from infectious diseases.

• The Korean Journal of Food And Nutrition
• /
• v.37 no.1
• /
• pp.40-47
• /
• 2024

Gastrodia elata has been used in traditional Chinese medicine for treating headaches, dizziness, and convulsive illness for centuries. G. elata has traditionally been processed by steaming or blanching to increase the content and quality of its main ingredients. This study aimed to identify changes in physicochemical properties and active ingredients of G. elata depending on the steaming time. Data of this study could be used to develop traditional medicine and health foods. No steaming was used as a control. Steaming time was 5, 10, 20, 30, 60, or 120 min. The drying yield according to the steaming time ranged from 20.2% to 22.9%, with the lowest drying yield at 120 min. As the steaming time increased, gastrodin content increased more than that in fresh G. elatadue to inhibition of β-glucosidase enzyme activity, 4-hydroxybenzyl alcohol condensation, and parishin decomposition. Steamed G. elatadid not show higher total polyphenols, total flavonoids, or ABTS radical scavenging activities than fresh G. elata even with an increase of steaming time. The steaming time to improve the quality of G. elata may varied depending on the size of G. elata. Thus, it is important to set the steaming time taking these characteristics into consideration.

• Current Photovoltaic Research
• /
• v.12 no.1
• /
• pp.24-30
• /
• 2024

To create an environment for growing ginseng sprouts, we developed a solar module that partially transmits and disperses light. A G to G type light transmission and dispersion solar module was developed using glass with a mist pattern applied, and the light dispersion effect of the developed module was confirmed through illuminance measurement. The output of one module is approximately 260 W, and the configuration consists of 48 cells in series in 4 strings. The cultivation system where the developed module will be installed was developed in the form of a container, and three units of 2.6 kW (260 W x 10 EA). The inside of the cultivation system consists of a shading screen, air conditioner, ventilator, plastic pot, etc. to create an environment for cultivating sprout ginseng. As a result of actually planting sprout ginseng, it was confirmed through verification that the plants were grown without any problems.

• Journal of Surface Science and Engineering
• /
• v.57 no.4
• /
• pp.274-284
• /
• 2024

In this study, copper foil was electroplated under high current density conditions. We used Polyethylene Glycol (PEG), known for its thermal stability and low decomposition rate, as an inhibitor to form a stable and smooth copper layer on the titanium cathode. The electrolyte was composed of 50 g/L CuSO₄ and 100 g/L H₂SO₄, MPSA as an accelerator, JGB as a leveler, and PEG as a suppressor, and HCl was added as chloride ions for improving plating efficiency. The copper foil electroplated in the electrolyte added PEG which induced to inhibit the growth of rough crystals. As a result, the surface roughness value was reduced, and a uniform surface was formed over a large area. Moreover, the addition of PEG led to priority growth to the (111) plane and the formation of polygonal crystals through horizontal and vertical growth of crystals onto the cathode. In addition, the grains became fine when more than 30 ppm of PEG was added. As the microcrystalline structure changed, mechanical and electrical properties were altered. With the addition of PEG, the tensile strength increased due to grain refinement, and the elongation was improved due to the uniform surface. However, as the amount of PEG added increased, the corrosion rate and resistivity increased due to grain refinement. Finally, it was possible to manufacture a copper foil with excellent electrical and mechanical properties and the best surface properties when electroplating was carried out under the condition of additives with Cl-20 ppm, MPSA 10 ppm, JGB 5 ppm, and PEG 10 ppm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.5
• /
• pp.554-561
• /
• 2024

Micro light-emitting diodes (µLEDs) have been utilized in various fields such as displays, and smart devices, due to their superior stabilities. Since the applications of the µLEDs have been extended to medical devices and wearable sensors, excellent optical properties and uniformity of the µLEDs are important. Hence, several researchers have investigated to enhance the optical efficiency of the µLEDs through micro/nano lens. However, the reported methods for realizing the micro/nano lens have some drawbacks such as complex and high-cost manufacturing processes. Herein, we developed µLEDs with 3D-printed hydrogel microlenses. The printed hydrogel had high transparency and excellent adhesive strength, allowing it to attach onto top surface of the µLEDs without any additional adhesives. Microscale printing technology using a 3D printer achieved quick and fine printing in desired shapes and arrangements, showing the possibility of mass production. The 3D-printed microlens can be applied to improve not only the optical properties of µLEDs but also other optical devices.

• Journal of the Korean Society of Radiology
• /
• v.84 no.4
• /
• pp.900-910
• /
• 2023

Purpose To assess normal CT scans with quantitative CT (QCT) analysis based on smoking habits and chronic obstructive pulmonary disease (COPD). Materials and Methods From January 2013 to December 2014, 90 male patients with normal chest CT and quantification analysis results were enrolled in our study [non-COPD never-smokers (n = 38) and smokers (n = 45), COPD smokers (n = 7)]. In addition, an age-matched cohort study was performed for seven smokers with COPD. The square root of the wall area of a hypothetical bronchus of internal perimeter 10 mm (Pi10), skewness, kurtosis, mean lung attenuation (MLA), and percentage of low attenuation area (%LAA) were evaluated. Results Among patients without COPD, the Pi10 of smokers (4.176 ± 0.282) was about 0.1 mm thicker than that of never-smokers (4.070 ± 0.191, p = 0.047), and skewness and kurtosis of smokers (2.628 ± 0.484 and 6.448 ± 3.427) were lower than never-smokers (2.884 ± 0.624, p = 0.038 and 8.594 ± 4.944, p = 0.02). The Pi10 of COPD smokers (4.429 ± 0.435, n = 7) was about 0.4 mm thicker than never-smokers without COPD (3.996 ± 0.115, n = 14, p = 0.005). There were no significant differences in MLA and %LAA between groups (p > 0.05). Conclusion Even on normal CT scans, QCT showed that the airway walls of smokers are thicker than never-smokers regardless of COPD and it preceded lung parenchymal changes.

• Journal of Korea Port Economic Association
• /
• v.23 no.1
• /
• pp.163-193
• /
• 2007

Jeon-buk is well equipped for the growth of the logistics industry as it is the center of inland and marine traffic. However, it was not activated because of the infrastructure insufficiency. This paper surveyed the logistics industry facilities, interviewed people who are engaged in its business, researched into their business difficulties and the problem of the logistics industry of Jeon-buk. As a result of research, this paper makes an alternative plan for the development of the logistics industry of Jeon-buk area.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.37-45
• /
• 2024

This paper presents a design approach for passive vibration control to reduce vertical vibrations transmitted to the control unit during hovering flight of a quadrotor drone. Ground vibration test simulation based on finite element model was performed for forced vibration analysis of the quadrotor drone. First, modal analysis was performed to evaluate dynamic characteristics. Forced vibration response analysis was then performed to obtain the steady-state response within the operating frequency range under the hovering flight condition. Furthermore, to obtain the vibration reduction effect, a viscous damping tape was applied at positions that could induce vibrations transmitted to the control unit under the same conditions. Such a passive vibration control approach was investigated. Relevant vibration reduction effect was assessed with respect to the application of damping materials and the attachment position.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.364-370
• /
• 2009

This study was conducted to survey, analyze on the compaction layer and the plow layer at Jeonbug and Jisan series paddy soil, which is the representative soil in fluvio-marine and local alluvium, respectively. The depths of surface soil were 12.6 and 12.7 cm in Jeonbug and Jisan series, respectively. A plowing depth was 10.5 cm. The properties of compaction layer in two soil series were as follows. The hardness were $14.7kg\;cm^{-2}(25.3mm)$ and $8.7kg\;cm^{-2}(22.1mm)$ in Jeonbug and Jisan series, respectively. The thickness were 22.3 cm and 17.8 cm in Jeonbug and Jisan series, respectively. The depth of soil compaction, which means depth from surface, were 15 and 20 cm in Jeonbug and Jisan series, respectively. The relationship between the hardness of compaction layer and the depth of surface soil showed negative correlation, however relationship between the hardness and the thickness of compaction layer showed positive correlation. Soil temperature was lower in compaction layer than in plow layer. This temperature differences between compaction layer and plow layer were from 1.0 to $2.5^{\circ}C$ in Jeonbug series and from 0.7 to 2.1 in Jisan series. The soil physical properties of compaction layer were higher in bulk density and solid phase and lower in porosity and gaseous phase than those of plow layer in all soil series. The soil chemical properties of compaction layer were higher in pH, content of available silicate, exchangeable calcium and magnesium but lower in total nitrogen, content of organic matter and available phosphate than those of plow layer in all soil series. Cation exchangeable capacity and content of exchangeable potassium were similar between compaction layer and plow layer in Jeonbug series, however, in Jisan series these were lower in compaction layer than in plow layer. Elution amount of inorganic nitrogen were lower in compaction layer than in plow layer in all soil series. The content of soluble Fe and Mn were plenty in compaction layer compared with plow layer and these tendency was apparent in Jeonbug series. The water depth decrease were fast until the latter part of June, and were slow as $1{\sim}3mm\;day^{-1}$ for July and August, and were fast again from september. Rice roots distributions as each soil series and tillage method were 25 cm at rotary plowing in Jeonbug series, 30 cm at deep plowing in Jeonbug series, and 20 cm at tillage in Jisan series. Dry weight per m2 at heading stage were much in order of deep plowing in Jeonbug series, rotary plowing in Jeonbug series, and tillage in Jisan series.

• Journal of the Speleological Society of Korea
• /
• v.2 no.2
• /
• pp.18-21
• /
• 1976

각종지질도와 지질도폭에 의거하여 적화암지역이 분포한 고생대에서 중생대초에 속하는 조선계와 평안계를 우선 찾아야 할것애다. 그러나 전북 지방에 있어서는 조선계는 거의 찾아 볼수 없고 평안계는 몇몇 지역에 분포하고 있었다. 평안계는 상부 석탄기(Upper Carboniferous)에서 삼첩기(Trissic)에 형성한 지층이다. (중략)