• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.68-74
• /
• 2015

This paper describes about the efficiency improvement of switched reluctance generator (SRG) over the rated speed region. Since the current shape has a great influence on the loss of the machine, so the system efficiency can be improved by optimizing the current shape. In case the wide speed range application such as wind power and medium size hydraulic power generation, a method of switching angle control is suggested to obtain the wanted current shapes. In order to verify the method, the experimental platform is set up. The feasibility of the theory is verified by simulation and experimental results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.487-489
• /
• 2004

마이크로 사이즈 공음극 플라즈마 전극에 대한 제작 및 방전 실험을 진행하였다. 방전 전극은 200~500 um의 hole 형상을 제작하였으며 70~850 torr He 분위기에서 방전 실험하였다. 실험 샘플은 막힌 공음극 형상과, 관통된 공음극 두가지 형상을 실험하였다. 마이크로 공음극 플라즈마의 공음극 크기에 따른 결과에서 사이즈가 작을수록 총 전류 값은 낮아지나, 전류 밀도는 증가하였다. 막힌 공음극에서는 양저항 특성을, 관통된 공음극에서는 부저항 결과를 얻었다.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.224-229
• /
• 2019

Seat of automobile is required to support the comfort to driver and passenger during the driving. The control method of the seat position is changed from manual type to power type, which means using the motor to increase the comfort of the driver. By using the motor, several problems, such as vibration, noise, and over-current, appeared. These problems can be reduced through the control of seat motor. In this study, a control technology of four control variables, which determine profile of the input voltage applying to the seat motor, is proposed to generate the current profile having soft-start and soft-stop. The current flowing through the coil by input voltage is described by mathematical modeling of power seat. It is confirmed that optimized current profile having soft-start and soft-stop can be generated from simulation using the mathematical model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.120-126
• /
• 2010

This paper propose analysis and examination of the melting characteristic of fuse elements by repeating overcurrent as a depletion factor of high pressure current limiting fuse through test following existence and nonexistence of extinction material and various configuration of elements. To examine deterioration progress rate by repeating overcurrent we analyzed heat for various element notching configuration, designed plate type, ring type element and estimated the relationship with life span by analyzing breaking characteristic through repeating overcurrent test with adjusting load factor at Silicon Dioxide(SiO2) filled state or in air. A Crack by repeat stress, decrease of section and transformation by friction with extinction material by repeating overcurrent causes a problem which shortens life span based on fuse repeating frequency. Since the contents of this paper might be useful to research the correlation between friction of materials and repeating life span based on load factor of repeating current, the quality of product would be improved through solution of the problem.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.51-55
• /
• 2007

Nickel iron (Ni-Fe) alloy coating was investigated. The effects of the current density, current type, pulse duration and bath compositions on the morphologies and surface hardness of nickeliron deposits as well as the chemical compositions were investigated. The morphologies, surface hardness and chemical compositions of nickel-iron deposits were varied with current density, current type and bath compositions. The surface hardness was increased up to $550{\sim}600Hv$ when PC plating was employed. Crackless coating was obtained when saccharin was added. The change of composition with thickness was analyzed with EDS and FESEM.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 2011

Electrosurgical knee wand (EKW) is a high-frequency thermocautery instrument and is often used for coagulation, ablation, excision, and extirpation of knee ligaments and tissues. In order to maximize the success rate, ease, and safety of knee surgery using EKW and radiofrequency ablation, it is necessary to ensure that the EKW selectively approaches the lesion with utmost accuracy and safety. The key feature of this instrument is its excellent maneuverability. Hence, the authors constructed a tensile spring model based on a shape memory alloy (SMA), which exhibits the shape memory effect. This model can be used in knee surgery as it is considered the most biocompatible femorotibial surgical actuator. The changes in external temperature with current and the thermoelectric characteristics of the SMA were investigated. The relationship between the restoring force and the typical stroke (TS) in response to the conditions in the SMA tensile spring design were evaluated. In conclusion, as the diameter of the SMA tensile spring decreased, the maximum temperature increased. The strain in the actuator caused a stable and proportional increase in the force and induced current for up to 15s, but this increase became very unstable after 30s. Moreover, the relationship between the current and the TS was more stable than that between the current and the restoring force.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.245-251
• /
• 2016

A numerical model is developed to predict distributions of current density and temperature. Also the complete fuel cell performances were compared. In this study the effect of flow field design and flow direction on current density and temperature distribution as well as full cell performance. The complete three-dimensional Navier-Stokes equations were solved with convergence of electro-chemical reactions terms. In this paper, the two different flow field design were simulated, straight channel and rectangular serpentine flow channel, which is commonly used. The effect of flow direction, co-flow and counter-flow, was also analyzed. The current density and temperature is higher with abundant oxygen not fuel. Also, temperature distribution was able to be drawn by using computer simulation. In this paper, the relationship among flow pattern, flow field design and current denstity distribution.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1256-1256
• /
• 2015

방열판과 같이 전류나 전압원에 연결된 도체의 구조물은 유기된 전류에 의해 전파를 방사하게 된다. 이때의 전류 분포는 도체 구조물의 형상과 주파수에 따른 전류 분포를 갖게 되는데, 이는 모드의 특성 해석을 통하여 분석할 수 있다. 원치 않는 전파의 방사를 이 특성 모드 해석을 통하여 분석하고, 이를 통해서 효율적인 접지 위치를 선정 후 최적의 저항을 사용하여 원치 않는 전파의 방사가 최소가 되도록 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.136-136
• /
• 2012

Cu 박막이 pyrophosphate baths로부터 전기도금공정에 의해 제조되었으며, 전류밀도 및 도금온도가 Cu 박막의 특성에 미치는 영향을 조사하였다. 전류 밀도 및 도금온도 모두 전류효율, 잔류응력, 표면형상, 미세조직에 상당한 영향을 미쳤음을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.90-92
• /
• 2005

Magnetic Fluid Linear Pump(MFLP)는 자성유체의 자기적 성질과 유체의 성질을 이용하여 일반적인 펌프의 기어 대신 자성유체를 이용하여 기계적 진동이나 소음을 최소화한 시스템이다. MFLP는 구조가 간단하고 동작전류에 의해 쉽게 조절할 수 있다. MFLP의 동작전류에 의해 발생한 자기장의 정도에 따라 유연하면서 펌핑력이 높은 동작이 가능하다. 따라서 MFLP를 운전하는데 있어 동작전류의 패턴과 크기, 중첩정도에 따른 펌핑력이 변하게 되며, 이에 따른 자기장과 관내의 자성유체의 형상을 해석하여 유연하고 펌핑력이 높은 MFLP의 운전방식을 개발하고자 하였다.