• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1702-1708
• /
• 2013

OLED has good efficiency of power consumption by having no power consumption from black color as different with LCD. when it has white color, all RGB pixel should be glowing with high power consumption and that can make it has short life time. This paper suggest the way of low power consumption for OLED panel using adaptive luminance enhancement with color compensation and implement it as hardware. This way which is based on luminance information of input image makes converted luminance value from each pixel in real time. There is with using the basic idea of chromaticity reduction algorithm, showing new algorithm of color correction. And performance of proposed method was confirmed by comparing the conventional method in experiments about 48.43% current reduction. The proposed method was designed by Verilog HDL and was verified by using OpenCV and Windows Program.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.95-103
• /
• 1993

A conceptual thermoelectric heat pump(cooling mode) of small capacity is designed. Its performance is investigated through parametric analysis. COP and cooling capacity decease as the ambient temperature increases with ${\mu}$, J, T$\sub$wi/, fixed. To design a system of fixed capacity comes to calculate ${\mu}$ and J when T$\sub$wi/, and T$\sub$a/ are given. As v is fixed by semi-conductor manufacturers, optimum combination of n and I should be searched for ν. Optimum current could be calculated using ${\mu}$-J curve and optimum value of ${\mu}$. COR$\sub$R/ increases as water flow rate increases and T$\sub$a/ decreases. The effect of heat transfer coefficient at hot(heat releasing) side is more significant than that at cold(heat absorbing) side.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.8
• /
• pp.33-44
• /
• 2000

The lightning with high voltage and current can enter the basestations for mobile communication through their antenna. The device which can protect the basestation against the lightning, is surge arrestor. In this paper, the concept, kind, operating mechanism, design and fabrication of surge arrestor were studied. Based on the studied data, variable surge arrestors were designed for the current mobile communication service like a cellular, GSM and PCS and the next generation mobile communication like a IMT-2000. Computer simulation for the prediction of their characteristics and inner structure optimization for the improvement of their electrical characteristics were carried with high frequency 3D structure simulator. Quarter wave short stub surge arrestors for IMT-2000 were fabricated with their final design and then the measurement of electrical characteristics and the lightning test were executed. As a results of measurement, we obtained below 1.05 of VSWR, -0.035 dB of insertion loss, -150 dBc of intermodulation and 7∼ll V of residual voltage.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.911-917
• /
• 1995

로듐 자기 기전력형 중성자 계측기는 단위 중성자당 발생되는 전류 신호가 매우 커 계측성이 우수하나 연소율이 빨라 자주 교체해야 하므로 재장전 기간 연장 및 새로운 로듐계측기 구입 등의 문제점이 있다. 75% 연소에 해당하는 제5핵 연료 주기 기간 동안 영광 3, 4호기와 같은 C-E 원자로에 사용되고 있는 로듐 자기 기전력형 중성자 계측기의 연소 거동이 C-E에 의해서 연구되었다. 약 제3핵연료주기까지 분석한C-E의 초창기 연구에서는 중성자 방사화율 개념에 근거하여 약 66%연소시점까지 로듐계측기 연소특성곡선은 선형적임이 밝혀진 바 있다. ［l, 2］ 그 후 C-E의 연구에 의하면 약 75% 연소에 해당하는 제5핵연료 주기까지도 로듐계측기 연소 특성 곡선은 선형적임이 밝혀졌다. 그 결과로 C-E형 원자력발전소에서 사용되는 로듐 노내계측기의 수명을 약 60%연소에서 66%연소 시점까지 연장시킬 수 있게 되었다. ［3］이 정도의 계측기 수명 연장은 약 반년의 원자로 운전 기간에 해당되며 차기 핵연료주기에서 많은 로듐 노내계측기를 계속 사용할 수 있게 한다. 특히 영광 3, 4호기가 12개월 핵연료 주기에서 18개월 핵연료 주기로 재장전 전략을 바꿀 경우 로듐 노내계측기의 수명 이 연장되지 않으면 계측기 교체가 빈번해 질 것으로 사료되어 로듐 수명 연장과 관련된 기술 특히 C-E 및 B&W의 로듐 노내계측기 연소도 특성곡선 불확실도 평가 및 출력 측정 계통 오차 분석 기술을 소개하고자 한다. 영광3, 4호기에서 사용중인 로듐 노내계측기 수명을 현재 연소도 기준 66%내로 한정하고 있는데 C-E 및 B&W의 로듐 노내계측기연소 특성에 관한 연구 내용을 분석한 결과 노내계측기 수명을 연소도가 66%를 초과하는 계측기가 있어도 전체적으로 불확실도가 안전한계를 넘지 않으면 노내상주가 가능한 것으로 평가되었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.31-38
• /
• 2009

To improve the image quality and lower the power consumption of the mobile applications, it is the one of the best candidate to control the backlight unit of the LCD module with ambient light. Ambient light sensor and readout circuit were integrated in LCD panel for the mobile applications, and we designed them with LTPS TFT. We proposed noble start-up correction in order to correct the variation of the photo sensors in each panel. We used time-to-digital method for converting photo current to digital data. To effectively merge time-to-digital method with start-up correction, we proposed noble dual slope correction method. The entire readout circuit was designed and estimated with LTPS TFT process. The readout circuit has very simple and stable structure and timing, so it is suitable for LTPS TFT process. The readout circuit can correct the variation of the photo sensors without an additional equipment, and it outputs the 4-levels digital data per decade for input luminance that has a dynamic range of 60dB. The readout rate is 100 times/sec, and the linearity error for digital conversion is less than 18%.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.40-45
• /
• 2003

In this work, the effect of different contents of $Fe_3O_4$ and temperature variation on the electrical conductivity ($\sigma$) in the polar acrylonitrile butadiene rubber (NBR)/$Fe_3O_4$ (magnetite) mixture system was investigated. It was found that the percolation threshold concept holds true for the conductive particle-filled composites where $\sigma$ indicates a nearly sharp increase when the concentration of magnetite in the mixture exceeds 22%. The temperature dependence of $\sigma$ was thermally activated below and at the percolation threshold ($P_c$). Magnetite acted as reinforcing and conductive filler for NBR. At room temperature and higher voltages, the electrical current was proportional to the square of voltage ($I{\propto}V^2$) for the composites which contain 30 phr of magnetite. Moreover, it was shown that the composites with magnetite of 50 phr showed the highest tensile strength and elongation at break, which was due to the formation of optimal physical interlock and crosslinking. The results of 100%, 200%, and 300% Young moduli said that the moduli are largely correlated with reinforcement effect of magnetite and viscosity of the blends from torque curve.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.99-105
• /
• 2008

Entering the twenty-first century, the technology of wireless communication develops the applications with the ubiquitous concept. It is standardized and can be choose for various uses in different fields. With this trend and the advantages of wireless system, the research is conducted to use wireless system instead of wire system to existing equipment on aircraft. Wireless system is general on aircraft. However, wire system is used to communicate ground crew and pilot and to get data from equipment installed on aircraft. In this study, a wireless voice communication system was developed to communicate ground crew and pilot on aircraft as effective wireless system. Also, a wireless system to transmit and receive voltage and current data was developed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.81-86
• /
• 2006

In this paper, a new process detection circuit is proposed. The proposed process detection circuit compares a long channel MOS transistor (L > 0.4um) to a short channel MOS transistor which uses lowest feature size of the process. The circuit generates the differential current proportional to the deviation of carrier mobilities according to the process variation. This method keep the two transistor's drain voltage same by implementing the feedback using a high gain OPAMP. This paper also shows the new design of the simple high gam self-biased rail-to-rail OPAMP using a proposed self-biased super MOS composite circuit. The gain of designed OPAMP is measured over 100dB with $0.2{\sim}1.6V$ wide range CMR in single stage. Finally, the proposed process detection circuit is applied to a differential VCO and the VCO showed that the proposed process detection circuit compensates the process corners successfully and ensures the wide rage operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.342-342
• /
• 2007

원자층 증착(Atomic Layer Deposition: ALD) 방법은 반응물질들을 펄스형태로 챔버에 공급하여 기판 표면에 반응물질의 표면 포화반응에 의한 화학적 흡착과 탈착을 이용한 박막증착기술이다. ALD법은 박막의 조성 정밀제어가 쉽고, 파티클 발생이 없으며, 대면적의 박막 증착시 균일성이 우수하고, 박막 두께의 정밀 조절이 용이한 장점이 있다. 원자층 증착 공정에서 짧은 시간 안에 소스를 충분히 공급하기 위한 방법으로는 소스 온도를 증가시켜 전구체의 증기압을 높여 반응기로의 유입량을 증가시키는 방법, 전구체의 공급시간을 늘리는 방법 등을 들 수 있다. 그러나 전구체 온도를 상승시키는 경우, 공정 조건의 변화가 요구되며 전구체의 변질에 의하여 형성된 막이 의도하는 막 특성을 만족시키지 못하게 되는 문제점이 발생될 우려가 있다. 그리고 전구체를 충분히 공급하기 위하여 전구체의 공급시간을 늘이는 방법을 사용하면, 원하는 두께의 막을 형성하기 위하여 소요되는 공정시간이 증가된다. 이를 해결하기 위해 수송가스를 이용한 버블러 형태의 전구체 공급 장치를 사용하지만 이 또한 전구체의 수명을 단축시키는 단점을 가지고 있다. 본 논문에서는 위의 문제점을 극복할 수 있는 새로운 개념의 수송가스 도움 전구체 공급 장치를 소개한다. 본 연구에서 사용된 수송가스 도움 전구체 공급 장치를 가지는 ALD 장비는 Lucida-D200 (NCD Technology사)이며 기판으로는 8인치 실리콘 웨이퍼를 사용하였으며 (TEMA)Zr을 사용하여 ZrO2 박막을 성장하였다. 수송가스 도움 전구체 공급 장치를 사용한 경우, 그렇지 않은 경우 보다 $30^{\circ}C$ 이상 전구체 온도를 낮출 수 있으며, 또한 증착 속도를 약 2배정도 증가시킬 수 있었다. 이들 박막들은 XRD, XPS, AFM 등을 이용하여 결정구조, 결합에너지, 표면 거칠기 등의 특성을 관찰하였다. 그리고 C-V, I-V 측정을 이용해 정전용량, 유전율, 누설전류 등의 전기적 특성을 평가하였다.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.332-345
• /
• 2013

In this paper, recently, it is described to the piezoelectric transformer technology develops, because it was have to favorable characteristics such as electromagnetic-noise free, compact size, higher efficiency, and superior power density, flux linkage, noiseless, etc. its resonance frequency was used to output waveform of a sine wave. A rotor speed identification method of induction motor based on the theory of flux model reference adaptive system(FMRAS). The estimator execute the rotor speed identification so that the vector control of the induction motor may be achieved. The improved auxiliary variable of the model are introduced to perform accurate rotor speed estimation. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM techniuqe and DC-DC converter. High speed calculation and processing for vector control is carried out by digital signal one chip microprocessor. Validity of the proposed control method is verified through simulation and experimental results.