• Journal of Life Science
• /
• v.7 no.2
• /
• pp.142-148
• /
• 1997

This study was carried out to clarify seasonal changes of chemical compositions and their interrelation in leaves, shoots and berries treated with gibberellin($GA$_{3}$)for seedless grapes in ‘Delaware’grapevines. the clusters were dipped twice with 100ppm $GA_{3}$: 10 days befor and after the full bloom. The reaults obtained as follows; 1. Cumulative growth curve of berry fresh weight showed a double sigmoid curve and the characteristics of three distinctive growth stages(I, II, III)were weekened with $GA_{3}$ treatment. 2. while the contents of ash, total carbon, total nitrogen and total carbohydratd had little reation with edvelopment and ripeness of berries, those of total sugar and starch jad close relation, viz., they decreased with enlargement and maturity fo berries, but increased rapidly after harvest in leaves and shoots. Especially, total sugars in leaves and shoots decreased coincidently with starch-increasing in shoots at November. 3. The contents of total soluble solid and reducing sugar in berries increased rapidly at growth stage III, but those of total titratable acidity and organic acid decreased coincidently with sugar-increasing. 4. The berry-hardness increased until growth stage I, and then stagnated until gtowth stage II, and then increased rapidly at growth stage III. pH of berry-juice decreased until growth stageII, afterwards increased at growth stage III. 5. By correlation and path coefficient analysis between qualitative characters and the ratio of total soluble solid to titratable acidity($^{\circ}$Brix/Acidity), total correlation coefficients were all highly significant. Of these characters, pH and viscosity of berry-juice were positive, but brightness and hardness of berry, negative. The direct effect of pH on $^{\circ}$Brix/Acidity ratio, p4y=0.9090, was large positively and those of berry-hardness and juice-viscosity, p1y=0, 5938, median and, p2y=0, 3550, small, respectively. Direct effect of brightness was negatively small.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.299-303
• /
• 2008

A thermally cross-linkable polymer, poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV), was synthesized by the Heck coupling reaction. In order for the polymer to be cross-linkable, 20 mol% excess divinylbenzene was added. The chemical structure of Cross-PPV and thermally crosslinked Cross-PPV were confirmed by FT-IR spectroscopy. From the FT-IR, UV-Vis, and PL spectral data, thermally crosslinked Cross-PPV was insoluble in common organic solvents. The HOMO and LUMO energy level of thermally cross-linked Cross-PPV were estimated -5.11 and -2.56 eV, respectively, which were determined by the cyclic voltammetry and UV-Vis spectroscopy. From the energy level data, one can easily notice that thermally crosslinked Cross-PPV can be used for hole injection layer effectively. Bilayer structured device (ITO/crosslinked Cross-PPV/PM-PPV/Al) was fabricated using poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylenevinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene (PM-PPV) as the emitting layer, which have HOMO and LUMO energy levels of -5.44 eV and -3.48 eV, respectively. The bilayered device had much enhanced the maximum efficiency (0.024 cd/A) and luminescence ($45cd/m^2$) than those of a single layer device (ITO/PM-PPV/Al, 0.003 cd/A, $3cd/m^2$). The enhanced performance originated from that fact that cross-linked Cross-PPV facilitatse the hole injection to the emissive layer and the injected hole and electron from ITO and Al are recombined in emitting layer (PM-PPV) effectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.79-88
• /
• 2022

This study was conducted to evaluate the productivity of whole crop silage wheat utilizing the paddy fields during a couple of years from 2019 to 2021 in Suwon, Korea. This investigation was used the two maturity types of wheat cultivar 'Cheongwoo' (early) and 'Taeu' (late). The heading date of 2^nd year (Oct. 2020 to May. 2021) cultivation was delayed about 11 to 13 days by more than 1^st year (Oct. 2019 to May. 2020). The growth characteristics were shown that the plant height was increased in 2^nd cultivation, while the number of culms and the panicle part ratio were decreased. Moreover, the nutritive value of 'Cheongwoo' and 'Taeu' were also decreased in 2^nd cultivation. These changes have thought to a difference of the precipitation by cultivation years. Because, the precipitation during the period from the end of winter dormancy to the harvesting stage in 2^nd (337 mm) cultivation was more about twice than 1st (169.3 mm) cultivation. However, the dry matter yield of 'Cheongwoo' was not shown a statistical difference by cultivation years, while 'Taeu' was shown to decrease tendency. The total dry matter yield regardless of the cultivation years were higher in 'Cheongwoo' than 'Taeu', and especially 'Cheongwoo' was more 3 tons per hectare (15.3 t/ha) than 'Taeu' (12.6 t/ha) at 2^nd cultivation (p<0.01). The trend of dry weight in 'Cheongwoo', early mature type, showed a relatively high ratio of dry matter (p<0.05) was considered that due to a high panicle ratio by a fast heading and an adequate weight of panicles by a sufficient maturing. In conclusion, selecting the early maturity cultivars could achieve a higher and more stable total dry matter yield considering the cropping system in the central region. Furthermore, it also has the advantage of being able to double-cropping system with forage rice, which has considered the maximum whole-crop forage production year-round. These results suggest that the 'Cheongwoo' be optimum cultivar to produce the year-round forage on paddy fields in the central region.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.245-253
• /
• 2009

The importance of chloride ions in the corrosion of steel in concrete has led to the concept for chloride threshold level (CTL). The CTL can be defined as the content of chlorides at the steel depth that is necessary to sustain local passive film breakdown and hence initiate the corrosion process. Despite the importance of the CTL, due to the uncertainty determining the actual limits in various environments for chloride-induced corrosion, conservative values such as 0.4% by weight of cement or 1.2 kg in 1 $m^3$ concrete have been used in predicting the corrosion-free service life of reinforced concrete structures. The paper studies the CTL for blended cement concrete by comparing the resistance of cementitious binder to the onset of chloride-induced corrosion of steel. Mortar specimens were cast with centrally located steel rebar of 10 mm in diameter using cementitious mortars with ordinary Portland cement (OPC) and mixed mortars replaced with 30% pulverized fuel ash (PFA), 60% ground granulated blast furnace slag (GGBS) and 10% silica fume (SF), respectively, at 0.4 of a free W/B ratio. Chlorides were admixed in mixing water ranging 0.0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binder(Based on $C1^-$). Specimens were curd 28 days at the room temperature, wrapped in polyethylene film to avoid leaching out of chloride and hydroxyl ions. Then the corrosion rate was measured using the polarization resistance method and the order of CTL for binder was determined. Thus, CTL of OPC, 60%GGBS, 30%PFA and 10%SF were determined by 1.6%, 0.45%, 0.8% and 2.15%, respectively.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.210-218
• /
• 2015

Melon leaves showing yellowing symptoms were analyzed using electron microscopy and RT-PCR for major cucurbit-infecting-viruses (CMV, MNSV, CGMMV, SqMV, WMV, KGMMV, PRSV and ZYMV) reported in Korea, but these viruses were not detected. As the result of further analysis by next-generation sequencing (NGS), the virus was identified as Cucurbit aphid-borne yellows virus (CABYV), and then confirmed by RT-PCR using CABYV-specific primers. When photosynthetic capacity was measured based on chlorophyll fluorescence yield (ChlFY), the leaves of the diseased plants showed $4.09{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, which was one-third of the readings observed for unaffected normal plants ($12.36{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The root functions of plants affected by leaf yellowing symptoms (LYS) was $0.28mg{\cdot}g^{-1}$, about half that measured for the normal unaffected plants ($0.48mg{\cdot}g^{-1}$). Cytological observations revealed that there were no morphological differences in the palisade parenchyma and mesophyll spongy cells of the leaves between the diseased and the normal plants. However, the same leaf cells of the affected plants contained more starch granules compared to those of the normal, unaffected plants. We conclude that the LYS of muskmelon is not merely a physiological disorder but a viral disease caused by CABYV and spread by aphids.

• Journal of Nutrition and Health
• /
• v.31 no.9
• /
• pp.1411-1421
• /
• 1998

The purpose of this study was to investigate the effects of apo E polymorphisms and dietary counseling on the levels of plasma lipids in hyperlipidemic patients. The changes of serum lipids were assessed f3r 34 hyperlipidemic out-patients who changed their basal diet containing 20.1% fat(236.0mg cholesterol/day), 15.7% protein, and 64.2% carbohydrate to a diet containing 18.3% fat(109.8mg cholesterol/day), 15.7% protein, and 66.0% carbohydrate for 12 weeks. At the beginning of this study, the levels of plasma LDL-cholesterol were high according to apo E genotypes in the following order : E2/3

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.39-45
• /
• 2009

Statement of problem: Recently precalcification treatment has been studied to shorten the period of the implant. Purpose: This study was performed to evaluate the effect of precalcification treatment of $TiO_2$ Nanotube formed on Ti-6Al-4V Alloy. Material and methods: Specimens of $20{\times}10{\times}2\;mm$ in dimensions were polished sequentially from #220 to #1000 SiC paper, ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. The nanotubular layer was processed by electrochemical anodic oxidation in electrolytes containing 0.5 M $Na_2SO_4$ and 1.0 wt% NaF. Anodization was carried out using a regulated DC power supply (Kwangduck FA, Korea) at a potential of 20 V and current density of $30\;㎃/cm_2$ for 2 hours. Specimens were heat-treated at $600^{\circ}C$ for 2 hours to crystallize the amorphous $TiO_2$ nanotubes, and precalcified by soaking in $Na_2HPO_4$ solution for 24 hours and then in saturated $Ca(OH)_2$ solution for 5 hours. To evaluate the bioactivity of the precalcified $TiO_2$ nanotube layer, hydroxyapatite formation was investigated in a Hanks' balanced salts solution with pH 7.4 at $36.5^{\circ}C$ for 2 weeks. Results: Vertically oriented amorphous $TiO_2$ nanotubes of diameters 48.0 - 65.0 ㎚ were fabricated by anodizing treatment at 20 V for 2 hours in an 0.5 M $Na_2SO_4$ and 1.0 NaF solution. $TiO_2$ nanotubes were composed with strong anatase peak with presence of rutile peak after heat treatment at $600^{\circ}C$. The surface reactivity of $TiO_2$ nanotubes in SBF solution was enhanced by precalcification treatment in 0.5 M $Na_2HPO_4$ solution for 24 hours and then in saturated $Ca(OH)_2$ solution for 5 hours. The immersion in Hank's solution for 2 weeks showed that the intensity of $TiO_2$ rutile peak increased but the surface reactivity decreased by heat treatment at $600^{\circ}C$. Conclusion: This study shows that the precalcified treatment of $TiO_2$ Nanotube formed on Ti-6Al-4V Alloy enhances the surface reactivity.

• Solar Energy
• /
• v.20 no.2
• /
• pp.43-54
• /
• 2000

We prepared and characterized $Cu(In_{1-x}Ga_x)Se_2$(CIGS) films using a elemental co-evaporation method for absorbing layer of high efficiency thin film solar cells. The CIGS films deposited on a soda-lime glass exhibited low resistivity because of higher carrier concentration. Na was accumulated at the CIGS surface and the 0 and Se were also accumulated at the surface, suggesting that oxidation is a driving force of Na accumulation. The structure of CIGS film was modified or a secondary phase was formed in the Cu-poor CIGS bulk films probably due to the incorporation of Na into Cu vacancy sites. As the Ga/(In+Ga) ratio increased, the diffraction peaks of $Cu(In_{1-x}Ga_x)Se_2$ films were shifted to larger angle and splitted, and the grain size of $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films became smaller. All $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films showed the p-type conductivity regardless of the Ga/(In+Ga) ratio. Ag/n-ZnO/i-ZnO/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo solar cells were fabricated. The currently best efficiency in this study was 14.48% for $0.18cm^2$ area ($V_{oc}=581.5mV,\;J_{sc}=34.88mA$, F.F=0.714).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.296-304
• /
• 2018

The objective of this study was to analyze the impact of climate change on rice yield and quality. Experiments were conducted using SPAR(Soil-Plant-Atmosphere-Research) chambers, which was designed to create virtual future climate conditions, in the National Institute of Crop Science, Jeonju, Korea, in 2016. In the future climate conditions($+2.8^{\circ}C$ temp, 580 ppm $CO_2$) of year 2051~2060 according to RCP 8.5 scenario, elevated temperature and $CO_2$ accelerated the heading date by about five days than the present climate conditions, resulted in a high temperature environment during grain filling stage. Rice yield decreased sharply in the future climate conditions due to the high temperature induced poor ripening. And the spikelet numbers, ripening ratio, and 1000-grain weight of brown rice were significantly decreased compared to control. The rice grain quality was also decreased sharply, especially due to the increased immature grains. In the future climate conditions, expression of starch biosynthesis-related genes such as granule-bound starch synthase(GBSSI, GBSSII, SSIIa, SSIIb, SSIIIa), starch branching enzyme(BEIIb) and ADP-glucose pyrophosphorylase(AGPS1, AGPS2, AGPL2) were repressed in developing seeds, whereas starch degradation related genes such as ${\alpha}-amylase$(Amy1C, Amy3D, Amy3E) were induced. These results suggest that the reduction in yield and quality of rice in the future climate conditions is likely caused mainly by the poor grain filling by high temperature. Therefore, it is suggested to develop tolerant cultivars to high temperature during grain filling period and a new cropping system in order to ensure a high quality of rice in the future climate conditions.