• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2339-2344
• /
• 2014

of a microstrip transmission line, this transmission line can operate as the microstrip line or the coplanar line according to open or short connection between the ungrounded copper plane and grounded plane on the base plane. Two different type operation of the transmission line means that one transmission line can have two different characteristic impedances. This paper proposes and fabricates the circuit to be operated 2-ports power transmission line or 2-way power divider with the stable input matching characteristic by using this dual-impedance transmission line. The proposed circuit operates 2-ports power transmission line in case of the coplanar line or 2-way power divider line in case of the microstrip line. The fabricated circuit shows $S_{21}$ > -0.2 dB and $S_{11}$ < -15 dB above 700 MHz when the circuit operates 2-ports power transmission line. And, it is $S_{21}$ > -3.8 dB, $S_{11}$ < -10 dB and $S_{21}/S_{31}$ < ${\pm}0.3dB$ above 700 MHz when the circuit operates 2-way power divider.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.428-429
• /
• 2019

본 논문은 ESS나, 고압 DC 전압을 입력으로 받아 주변 제어기 제어보드의 전력을 공급하기 위한 새로운 고압 SMPS 토포로지를 제안하였다. 본 논문에서 제안하는 고압 SMPS의 사양은 최근 고압화 추세인 ESS 전압을 허용할 수 있는 최대 입력전압이 1800[V]이며 출력전압이 24[V]이다. 제안된 토포로지는 단일 고압 전력 소자 사용의 경제성을 극복하기 위해 분활 콘덴서를 이용한 전압 분배 형태로 구성하고, 전압의 동일한 분배를 위해 포워드 컨버터를 사용하였다. 제안된 토포로지를 PSIM에서 시뮬레이션 하여 타당성을 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.837-843
• /
• 2008

This paper proposes a power divider based on meta-material structure with dual-band operation. The meta-material structures of left-hand characteristic are constituted of series capacitors and shunt inductors, but they have parasitic series inductance and shunt capacitance effects. There is represented the composite right/ left-handed transmission line (CRLH-TL) model. When the power divider is implemented by using the CRLH-TL, the power divider can operate dual band. To verify the power divider with dual band, we are implemented to operate dual-band that is 0.88 GHz and 1.67 GHz. The characteristics of divider have the return loss less than each 21.0 dB and 15.8 dB and the insertion loss better than 3.83 dB and 3.64 dB at each frequency. Also, the output phase difference is $3{\sim}6^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.1-6
• /
• 2007

This paper presents an equal 3-way planar-type power divider. In conventional 3-way Wilkinson dividers, it has been difficult to realize the circuit because of the crossover of isolation resistors. In the proposed divider, the isolation resistors can be easily attached to the planar structure of the divider. In addition, no phase difference is observed at output ports without extra line compensation because of its symmetric structure. The fabricated 3-way divider has a greatly improved bandwidth by 160 % in $S_{11}$, 22.4 dB, min of isolation, and in phase characteristics between output ports at 2.4 GHz of center frequency from measurement.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.93-97
• /
• 2015

In this Paper, we proposed optimization of system performance, optimal splitting factor applied to power splitting protocol with relay in the cooperative communication undergo co-channel interference. We can possible to optimize and maximize the channel capacity of the receiver through optimal factor of splitting protocol. So, we can solve inability in system, and to increase the efficiency of the network. Finally, performance of the proposed protocol is analyzed in terms of outage probability, capacity of system.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.7-8
• /
• 2012

본 논문에서는 3레벨 NPC(Neutral Point Clamped)와 Active NPC 인버터의 스위치 손실 분배 기법에 따른 출력전력 분석을 하였다. 기존 3레벨 NPC 인버터의 경우 특정 불균형한 스위치 발열 때문에 전력밀도를 높이 설계할 수 없다. 따라서 본 논문에서는 ANPC inverter의 손실 분배기법을 적용하여 시뮬레이션으로 검증하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.63-69
• /
• 1998

The area optimization of the power distribution network is an important problem in the layout design of VLSI systems. In this paper we propose noval methods to solve the problem of designing minimal area power distribution nets, while satisfying voltage drop and electromigration constraints. We propose two novel greedy heuristics for power net design-one based on bottom-up tree construction using greedy merging and the other based on top-down linearly separable partitioning.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.223-224
• /
• 2012

본 논문은 퍼지 기반의 토크 분배 함수를 이용한 스위치드 릴럭턴스 모터의 토크 맥동 저감 기법을 제안한다. 일반적으로 스위치드 릴럭턴스 모터의 토크 맥동 저감 기법은 선행된 실험결과와 모터 파라미터의 변화에 대한 관측을 통해 오프라인으로 토크 분배 함수를 최적화한다. 이때, 모터의 높은 인덕턴스는 전류가 토크 분배 함수를 잘 추종하지 못하게 하여 의도치 않은 토크 맥동을 유발한다. 게다가 오프라인으로 토크 분배 함수를 계산하기 때문에 모델의 오차 및 변화에 따라 보상 성능이 저하 될 수 있다. 제안하는 제어기법은 퍼지 제어기를 이용하여 순시적으로 토크 분배 함수의 형상을 정정함으로써 토크 맥동을 저감한다. 시뮬레이션 결과를 통해 제안하는 제어기법의 우수성을 보인다.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.33-38
• /
• 2013

In this paper, we present the design and measured performances of an dual-band Gysel power divider based on band-stop characteristic. After the Gysel divider is designed by lumped elements at single operating frequency, and then using filter conversion technique the lumped elements were changed a band-stop characteristic with dual-band characteristics. The features of this design method are that ${\lambda}/4$ transmission line by replacing lumped elements suppressed harmonic characteristics and also can reduce the size. To validate of the proposed power divider, the divider has been designed and measured at 880 MHz and 1650 MHz dual frequencies. The measured performances of the Gysel divider agree with prediction results at two frequencies.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.69-76
• /
• 2010

From the present paper we researched about the design of 4-Way Wilkinson divider with waveguide to stripline transition which used to split the LO signal with equi-amplitude and equi-phase in the X-Band Monopulse radar RF front-end. The monopulse radar front end operating in the X-Band is composed of 3 waveguide reception mixers which down convert sum, azimuth and elevation signal to IF and one SSB waveguide mixers which generate X-Band test signal. It is required the 4-way divider with low loss, equi amplitude and equiphase splitting the LO signal to provide the LO signal to each mixer consisting RF frontend. In this paper we designed and fabricated the 4-Way Wilkinson divider with waveguide transition to divide the LO signal into equi-amplitude and equi-phase. The fabricated Wilkinson divider have the insertion loss 6.8dB, VSWR 1.06~1.28, and phase balance maximum 4.5degree for each output ports.