• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제30권6호
• /
• pp.1141-1149
• /
• 2020

Most of the industrial control network is an independent closed network, which is operated for a long time after installation, and thus the OS is not updated, so security threats increase and security vulnerabilities exist. The zero-day attack defense must be applied with the latest patch, but in a large-scale industrial network, it requires a higher level of real-time and non-disruptive operation due to the direct handling of physical devices, so a step-by-step approach is required to apply it to a live system. In order to solve this problem, utility-specific patch impact assessment is required for reliable patch application. In this paper, we propose a method to test and safely install the patch using the regression analysis technique and show the proven results. As a patch impact evaluation methodology, the maximum allowance for determining the safety of a patch was derived by classifying test types based on system-specific functions, performance, and behavior before and after applying the patch. Finally, we report the results of case studies applied directly to industrial control networks, the OS patch has been updated while ensuring 99.99% availability.

• KIPS Transactions on Computer and Communication Systems
• /
• 제3권10호
• /
• pp.357-364
• /
• 2014

The first mission for the IoT based hyper-connectivity communication is developing a device-to-device communication technique in infra-less low-power and lossy networks. In a low-power and lossy wireless network, IoT devices and routers cannot keep the original path toward the destination since they have the limited memory. Different from the previous light-weight routing protocols focusing on the reduction of the control messages, the proposed scheme provides the light-weight IPv6 address auto-configuration, IPv6 neighbor discovery and routing protocol in a IoT capable infra-less wireless networks with the bloom filer and enhanced rank concepts. And for the first time we evaluate our proposed scheme based on the modeling of various probability distributions in the IoT environments with the lossy wireless link. Specifically, the proposed enhanced RPL based light-weight routing protocol improves the robustness with the multi-paths locally established based on the enhanced rank concepts even though lossy wireless links are existed. We showed the improvements of the proposed scheme up to 40% than the RPL based protocol.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제9권3호
• /
• pp.267-274
• /
• 2004

In this paper, a new on-line dead-time compensation method is proposed. The output voltage errors due to the dead-time effect is considered as disturbance voltages. The magnitude of the disturbance voltages is estimated using a time delay control technique and the disturbance voltages are calculated using the estimated values, measured currents, and position information. The calculated disturbance voltages are fed to voltage references in order to compensate the dead-time effect. The proposed method is applied to a PM synchronous motor drive system and implemented in a digital manner using a digital signal processor (DSP) TMS320C31. The experiments are carried out for this system to show the effectiveness of the proposed method and the results show the validity of the proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제13권3호
• /
• pp.206-212
• /
• 2008

This paper proposes the PLL(Phase-Locked Loop) algorithm by a new FFT(Fast Fourier Transform) in a grid-connected PV PCS(Photovoltaics Power Conditionning System). The grid-connected inverter that is applied in a new renewable energy field needs the grid phase information for synchronism. Unlike the PLL which is normally used by three phase D-Q conversion, the preposed PLL algorithm using FFT has non-gain tuning and the powerful noise elimination by the characteristics of FFT. Both simulation and experimental result show that proposed algorithm has the good capacity.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제51권10호
• /
• pp.41-44
• /
• 2014

In full-duplex wireless communication, spectral efficiency can be improved over half-duplex communication system. In this paper, we consider full-duplex multiple-user (MU) multiple-input multiple-output (MIMO) system in which inter-user interference may degrade the performance of the full-duplex system. We propose a downlink power allocation technique at base station that can maximize the spectral efficiency only with the statistical information about the inter-user interference channel.

• Journal of Korea Multimedia Society
• /
• 제3권6호
• /
• pp.625-632
• /
• 2000

This paper proposes an adaptive multislot allocation algorithm in order to achieve large system capacity and higher throughput data transmissions. The proposed system is the combination of the slow adaptive modulation system, in which the base station dynamically a signs optimum modulation parameters measuring the CNR(carrier to noise power ratio) of each transmission terminal, and the multislot allocation scheme, in which the base station flexibly allocates an appropriate number of TDMA data slots according to the instantaneous load conditions. Computer simulations confirm that the proposed system can tremendously improve average message delay characteristics in comparison with the conventional fixed slot allocation method.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제10권2호
• /
• pp.124-129
• /
• 2005

This paper presents an advanced method for an initial pole position estimation of a Permanent Magnet Linear Synchronous Motor(PMLSM) that has an accurate incremental encoder for servo applications but does not have Hall sensors as a magnetic pole sensor. By appropriately using the secant method as a numerical method the proposed algorithm finds either of two zero force positions and then the correct d-axis by applying a q-axis test current. It only requires the tuned current controller and the relative position information md so it can be simply applicable to a rotary PMSM. The experimental results show the validity of the proposed method, which has an excellent performance with respect to an accurate pole position estimation under the minimal moving distance(average of about 85㎛) during the estimation process.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제10권1호
• /
• pp.87-94
• /
• 2005

This paper is about the compensation of phase angle error and amplitude difference in stationary 2 pole coordinates by the installation variation of sensor at low cost high resolution digital hybrid encoder. To solve the problem of amplitude difference at the existing hybrid encoder, we normalized the relative magnitude of the two analog signals. and also to solve the problem of installation variation when installed the sensor, we rotate the stationary 2 pole coordinates to compensate the location error of sensor. and we used and tested the QEP function and A/D port in DSP(TMS320F2812) to verify the mentioned proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제10권4호
• /
• pp.388-396
• /
• 2005

SRM has not been put into practical applications widely because of its large torque ripple, acoustic noise and low power factor. In addition, a traditional position sensor is needed for the drive control. So we propose an improved sensorless drive method of Switched Reluctance Motors using impressed voltage pulses. Conventional impressed voltage pulse method has a problem of phase delay because of low-pass filter. So in this paper we propose an unproved sensorless driving method based on the impressed voltage pulse using new pulse-shift circuit technique that overcomes the phase delay and start-up problem. Proposed method is implemented in a simple analog circuit instead of using an expensive DSP.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제13권4호
• /
• pp.303-310
• /
• 2008

Recently, IEC 61850 supports the standardized communication technique in both station bus and process bus, and presents substation automation model. In order to implement the IEC 61850 based communication in a substation using the MU (merging unit) which is one of the important data acquisition equipments in substation automation, the time synchronization is demanded for cooperative operation between the devices. This paper proposes the precision time synchronization technique using IRIG-B protocol to develop the MU under IEC 61850 communication protocol. The proposed technique is implemented and its performance is verified experimentally.