• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1707-1710
• /
• 2015

Energy Management System(EMS)는 전력 시스템에서 운영자에 의해 발전과 송전의 성능을 감시 제어 그리고 성능 최적화를 위하여 운영하는 시스템이다. 본 연구에서는 EMS(Next Generation Energy management System : NG-EMS)에서 클라이언트의 운영 시스템 자동 동기방법 및 웹 기반 온라인에서 뷰어를 실행, 운영하는 방법을 제안 한다. 본 연구는 인트라넷 망에서 클라이언트 운영 시스템의 효율적인 유지보수를 위하여 소프트웨어 패치 및 엔지니어링을 통해 도출된 그래픽 화면을 다수의 클라이언트에 자동 동기, 갱신하는 기능을 특징으로 한다. 또한 자동 동기 빌더를 사용하여 클라이언트에 동기 할 항목을 패키징하는 기능도 포함하고 있다. 자동 동기 서버 측에서는 본 연구의 구성에 의해 클라이언트의 동기 및 갱신 주기를 효율적으로 관리한다. 클라이언트가 메인서버로 접속할 시 자동동기 상태를 체크하는 서버에 문제가 발생했을 경우 다중 동기 서버 형태로 운영하여 불시 장애 발생에 효율적으로 대처가 가능하다. 또한 자동동기 시스템을 적용한 웹 기반 온라인 뷰어의 운영 시스템 및 방법을 제안한다.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.201-202
• /
• 2013

최근 기업들의 업무환경이 강력한 이동성을 가지는 모바일 환경으로 일부 이동함에 따라 적은 전력 소모량을 만으로도 기업 업무를 처리할 수 있을 만한 성능의 컴퓨팅 자원을 지원 가능토록 하는 Thin Client 모델이 주목을 받게 되었다. 또한 이는 사용자 별 독립 자원을 제공할 수 있는 클라우드 기술과 융합하여 단일 모바일 단말과 단일 가상 머신 간의 원격제어를 관리하는 모바일 클라우드라는 개념으로 발전되었다. 그러나 해당 방법으로 얻을 수 있는 작업 처리의 성능은 제공되는 가상 머신의 성능만큼의 제한이 있다. 또한 이종 클라우드 환경을 이용할 시 자원 간 이질성으로 인해 성능의 편차가 발생하기 때문에 이러한 문제를 해결하기 위한 기술이 필요하게 된다. 따라서 본 논문에서는 이러한 모바일 단말에서 이종 클라우드 자원을 이용하여 고성능 컴퓨팅 처리를 가능하도록 하는 위한 모바일 클라우드 환경에서의 고려사항 및 구조를 제안한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.4
• /
• pp.167-172
• /
• 2023

A low-noise phase-locked loop(PLL) with three negative feedback loops has been proposed. It is not easy to improve noise characteristics with a conventional PLL. The added negative feedback loops reduce the input voltage magnitude of voltage controlled oscillator which determines the jitter characteristics, enabling the improvement of noise characteristics. Simulation results show that the jitter characteristics are improved as a negative feedback loop is added. In the case of power consumption, it slightly rises by about 10%, but jitter characteristics are improved by about two times. The proposed PLL was simulated with Hspice using a 1.8V 180nm CMOS process.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.347-348
• /
• 2023

본 논문에서는 실제 규모 데이터센터의 3D 모델링을 기반으로 대상 공간별 화재 시나리오를 선정하여 화재 및 피난 시뮬레이션을 수행하였다. FDS와 Pathfinder는 full coupling 방식을 사용할 수 없는 한계가 있으며 semi coupling의 경우 가시화에는 도움이 되나 결과에 영향을 주지 않는다. 따라서 재실자의 피난 상황 시 경로에 대한 안전성과 화재 위험 노출 정도를 시각적으로 분석하는 것이 가능한 semi coupling과 시뮬레이션 결과 데이터 분석을 병행하여 수행하였다. 전산실의 경우 서버의 기능상실 한계 온도가 32도이기 때문에 서버 기능 정지 상황에 도달하는 시간을 중점적으로 분석하였다. 전산실은 업무 및 고객 서비스와 관련된 모든 데이터들을 저장하기 위해 항시 기동 되어야 하는데 전산실 내 화재가 발생할 경우 1~2분 이내 서버 기능이 정지되는 상황이 발생하였다. 따라서, 서버가 안전하게 계속 동작하기 위해서는 전력 계측 및 제어 케이블 열화, 서버 장치의 건전성이 유지되어야 하며 초기 화재를 빠르게 감지하여 진압하여야 한다. 피난 시뮬레이션의 경우 가시도를 상실하게 되는 시간이 약 195초(5m 미만) 인근으로 인원이 해당 층을 완전히 벗어나는 데 걸리는 시간이 약 125.6초였던 것을 보면 대피하기에 충분한 허용 피난시간(ASET)을 확보하고 있음을 알 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.465-468
• /
• 2007

An intelligent home network system using low-power and low-cost sensor nodes was designed and implemented. In Intelligent Home Network System, active home appliances control is composed of RSSI (Received Signal Strength Indicator) based user indoor location tracking, dynamic multi-hop routing, and learning integration remote-control. Through the remote-control learning, home appliances can be controlled in wireless network environment. User location information for intelligent service is calculated using RSSI based Triangle measurement method, and then the received location information is passed to Smoothing Algorithm to reduce error rate. In order to service Intelligent Home Network, moreover, the sensor node is designed to be held by user. The gathered user data is transmitted through dynamic multi-hop routing to server, and real-time user location & environment information are displayed on monitoring program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1250-1259
• /
• 2012

In this paper, a time-domain comparator is proposed for a successive approximation (SA) analog-to-digital converter (ADC) with a low power and high resolution. The proposed time-domain comparator consists of a voltage-controlled delay converter with a clock feed-through compensation circuit, a time amplifier, and binary phase detector. It has a small input capacitance and compensates the clock feed-through noise. To analyze the performance of the proposed time-domain comparator, two 1V 10-bit 200-kS/s SA ADCs with a different time-domain comparator are implemented by using 0.18-${\mu}m$ 1-poly 6-metal CMOS process. The measured SNDR of the implemented SA ADC is 56.27 dB for the analog input signal of 11.1 kHz, and the clock feed-through compensation circuit and time amplifier of the proposed time-domain comparator enhance the SNDR of about 6 dB. The power consumption and area of the implemented SA ADC are 10.39 ${\mu}W$ and 0.126 mm2, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.379-385
• /
• 2017

In general, distribution board, panel board and motor control center can be installed over a wide area such as residence of group, building, schools, factories, ports, airports, water service and sewerage, substation and heavy industries that are used to supply converts the voltages extra high voltage into optimal voltage. There are electrical accidents due to rise of contact temperature, loose contact between busbar, deterioration of the contact resistance, over temperature of the busbars. In this paper, we designed and implemented the busbar joint and temperature measurement system, which can measure the joint resistance of busbar and loose connection between busbar using potentiometer and non-contact infrared sensor. The experimental results show that tightening the bolt and nut is fully engaged, resistance was decreased and maximum error range was 0.1mm. Also, the experimental result showed that the temperature at the contact area is increased from $27.3^{\circ}C$ to $69.3^{\circ}C$by the contact resistance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.295-310
• /
• 2014

DCS (Distributed Control System), the main control system of power plants, is an automated system for enhancing operational efficiency by monitoring, tuning and real-time operation. DCS is becoming more intelligent and open systems as Information technology are evolving. In addition, there are a large amount of investment to enable proactive facility management, maintenance and risk management through the predictive diagnostics. However, new upcoming weaponized malware, such as Stuxnet designed for disrupting industrial control system(ICS), become new threat to the main control system of the power plant. Even though these systems are not connected with any other outside network. The main control systems used in the power plant usually have been used for more than 10 years. Also, this system requires the extremely high availability (rapid recovery and low failure frequency). Therefore, installing updates including security patches is not easy. Even more, in some cases, installing security updates can break the warranty by the vendor's policy. If DCS is exposed a potential vulnerability, serious concerns are to be expected. In this paper, we conduct the penetration test by using NESSUS, a general-purpose vulnerability scanner under the simulated environment configured with the Ovation version 1.5. From this result, we suggest a log analysis method to detect the security infringement and react the incident effectively.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.157-164
• /
• 2017

Mobile ECG signal measurement is a technique to measure small signals of several mV, and many studies have been conducted to remove noise including wandering scheme. Removal of the equipotential line noise caused by shaking or movement of the electrode cable is one of the core research contents for the electrocardiogram measurement. In this study, we proposed a modified step-size of combined NLMS(normalized least squares) and DLMS(delayed least squares) adaptive filter to eliminate baseline noise from ECG signals. The proposed method mainly adjusts initial filter step-size to reduce distortion of original ECG signals characteristic after eliminating baseline noise. The modified filter step-size is scaled by filter order size and distortion minimization factor. This method is suitable for portable ECG device with a small processor and less power consumption. This technique also decreases computation time which is essential for real-time filtering. The proposed filter also increase the signal to noise ratio (SNR) compared to conventional NLMS filter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.13-14
• /
• 2012

Than fluorescent lamps or light bulbs, long life, small power consumption and to the development of modern technology, LED (Light Emitting Diode) devices have the advantage of easy control. For these reasons, using the LED device, lighting has been widely used. LED using optical fiber technology using LED lighting technology with the development of wireless communication technology is attracting attention again. Using LED lights this study analyzed the performance of the technology transfer and implementation of the information transmission system of the visible light communication using LED lighting of the White Visible Light Communication (VLC) based PC module transmitter and receiver modules. Has made a system that can transmit information more than the value of the initial distance ~ 50cm, depending on the presence or absence of the lens, in order to increase the efficiency of the LED modules with different efficiencies that could confirm the performance of the implementation of the research, analysis, and application methods. and about the possibility that you want to check.