• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8
• /
• pp.2565-2574
• /
• 2000

The error diffusion method is good for reproducing continuous image to binary image. However the reproduction of edge characteristic is weak in power spectrum analysis of display error. In this paper. we present an edge-enhanced error-diffusion method which include pre-processing algorithm for edge characteristic enhancement. Pre-processing algorithm consists of the difference value between current pixel and local average of original image and weighting function of pre-filter. First. it is obtained the difference value between current pixel and the local average of peripheral pixels(5x5) in original image. Second, weighting function of pre-filter is composed by function including absolute value and sign of difference value. The improved Error diffusion algorithm using pre-processing algorithm, present a good result visually which edge characteristic is enhanced. The performance of the proposed algorithm is compared with that of the conventional edge-enhanced error diffusion by measuring the RAPSD of display error, the egde correlation and the local average accordance.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.2
• /
• pp.48-55
• /
• 1985

포물선형 혼 도파관을 사용하여 입사파의 음향전력밀도를 증대시킴으로써 압전물질의 압전비선 형성을 이용한 평판형 구조의 탄성 음향파 콘벌버를 제작하고 스펙트럼 확산 통신방식에서 S/N 비가 S 높으며 프로그램이 가능한 자기상관정합 필터로 사용될 수있음을 실험적으로 제시하였다. 본 실험에서 는 포물선형 혼 도파관을 사용한 탄성 음향파 콘벌버를 압전 재료인 YZ-LiNbO\sub 3\ 위에 중심 주파 수 100MHz 압축비 11:1, 적분시간 6인 IDT, 포물선형 혼 도파관 및 출력단자를 설계한 후 이를 포토리 토그라피 바업으로 제작하여 100 MHz 로 펄스 변조된 신호를 탄성 음향파 콘벌버의 양 입력에 인가하 여 자기상관 출력을 얻음으로써 신호 처리 이득이 18dB인 정합필터를 구현하였다.

• Proceedings of the KOSOMBE Conference
• /
• v.1985 no.06
• /
• pp.5-8
• /
• 1985

This paper describes the use of power spectral densing in the examination of the electromogram (EMG). The EMG signals were obtained with surface electrodes from the biceps brachii muscle. Shifts of the high-energy regions of the power spectra can be inferred from the changes in the mean frequency. This paper is consistent with result that most information of EMG signal is located 10-200 Hz.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.80-84
• /
• 1995

In the equivalent state with an actual transmission, the paper is presented the novel analysis of the dynamic characteristics of the automatic frequency control, using for QPSK relay system in digital land mobile communication, which is adopted a crass product frequency discriminator and the various kinds of frequency variances that calculate the closed loop frequency jitter are found.

• Journal of Biomedical Engineering Research
• /
• v.6 no.1
• /
• pp.19-30
• /
• 1985

This paper describes the EMG signals in frequency domain using power spectral density, The changes in the moan frequency can represent the energy distribution which results from changing in load before and during fatigue. Most of EMG signal power spectrum is located between 10 and 200Hz. Shifts of the high-energy regions of the power spectra can be inferred from the changes in the mean frequency. If the load is increased without fatigue-ocurring, the high frequency regions have more energy than the low frequency regions. And if load is increased during fatigue, the low frequency regions have more energy than the high frequency regions.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.273-276
• /
• 2011

우리는 감성 공학에 기반하여 일상 생활 속에서 비침습적이면서 사용하기 간편한 광전용적맥파신호를 계측하고 분석하는 이어폰형 생체 신호 측정 시스템에 관하여 연구하였다. 생체 신호 측정 시스템에서는 광전용적맥파(photoplethysmograph, PPG)와 3축 가속도로 생체 신호와 운동 신호를 활용하였다. 수신된 생체 신호인 광전용적맥파 신호는 Peak 검출 및 전처리 알고리즘을 통하여 심박동변동성(heart rate Variablity,HRV)에 대한 시계열 정보로 변환하고 고속 퓨리에 변환(Fast Fourier Transfirm, FFT)과 전력 스펙트럼 밀도 분석(Power Spectrum Density, PSD)방법으로 교감과 부교감 신경 활성도 변화를 관측하였고, 운동 센서로 움직임을 관측하였다. 수신부 시스템은 안드로이드 기반의 자바 어플리케이션으로 스마트 폰에서 구현하였고, 송신부인 이어폰 생체정보 측정모듈로 맥파를 측정하여 상황에 따라 변화하는 자율 신경계의 활성도비율을 확인하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.18-29
• /
• 1993

In single mode fiber optic transmission systems(FOT's) operated at high modulation rates over long fiber spans, chromatic dispersion can produce distortion in the demodulated waveforms, resulting in intersymbol interference(ISI) in the received signal and a reduction of transmission system performance. In this paper, chromatic dispersion limitations for intensity modulation and direct detection(IM-DD) systems are studied by considering the effect of phase modulation to amplitude modulation (PM-AM) conversion noise. Laser phase noise conversion to amplitude noise due to fiber chromatic dispersion is analyzed by deriving the noise power spectral density. We first derive the noise power spectral density of the laser phase noise to intensity noise conver- sion. Next, also evaluate the system power penalty and the transmitter laser linewidth required to avoid PM-AM conversion noise penalties in long-haul nonregenerative transmission system using an external modulator and optical amplifiers. For such system with optical amplifiers, transmission sys- tem length is limited due to fiber chromatic dispersion, even if an ideal external modulator is used.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.445-449
• /
• 2005

The mixed acoustic-convective mode combustion instability and the possibility of combustion control using a loudspeaker to these instabilities were studied. By changing inlet velocity, combustor length and equivalence ratio, the dynamic pressure signals and the flame structures were simultaneously taken. The results showed that as the combustor length increased and the inlet velocity decreased, the instability frequency decreased and the maximum power spectral densities of the dynamic pressures generally decreased. The instability frequency could be affected by an equivalence ratio over the operating conditions. From the data of close-loop control, as the loudspeaker may work out-of-phase with the natural instability, the optimum time-delay controller was confirmed to be able to reduce the vortex shedding from the mixed acoustic-convective mode combustion instability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.130-137
• /
• 2010

An uplink indoor positioning system is proposed in the present work, where the acoustic signals are solely used for positioning. The underlying acoustic signals include whistle, finger snap, and hands-clapping. In the proposed method, positioning is achieved by finding the time-difference-of-arrivals using several self-generating sounds. To evaluate the feasibility of the signals and their positioning accuracies, the database of 100 persons about self-generating acoustic signals is built up. The results show that the hands-clapping sound is the most suitable for acoustic-based indoor positioning.