• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.177-179
• /
• 2007

본 논문에서는 심플로러를 이용하여 실제와 가장 유사한 DFIG (Doubly-Fed Induction Generator)를 모사하였다. 이를 위해서 실제 바람과 유사한 속도 명령을 룩업 테이블로 만들어 대체하였고 실제 전기기기의 파라미터 값을 입력하였다. 그동안 풍력 발전에 있어서 발전기는 주로 매트랩등둥을 이용해서 DFIG를 구현하였기에 실제와 다소 다르고 모의실험으로 대체하기 매우 어려웠지만 심플로러(Simplorer)를 이용하여 실제와 가장 유사한 모의실험 세트를 구현하였다. 우선 터빈의 역할을 담당하는 전동기는 SVM 벡터제어를 이용하여 속도제어를 실시하였고 발전기는 슬립링을 가지고 있는 권선형 유도전동기를 사용하여 DFIG의 구조를 갖추었다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.560-562
• /
• 2010

본 연구의 목적은 농형 유도 발전기를 이용한 가변속 독립 운전형 풍력 발전 시스템의 최대 전력 추종 제어기법을 제안한다. 제안된 기법은 M-G 세트로 구성하여 풍력터빈의 역할을 하는 터빈 시뮬레이터를 직류전동기의 토크제어를 이용하여 구현하였다. 농형 유도발전기는 벡터제어를 기본으로 간접 벡터제어를 위하여 유도발전기를 좌표 변환하여 모델링하고 이것을 기초로 제어알고리즘을 도출하였다.

• New & Renewable Energy
• /
• v.10 no.3
• /
• pp.31-38
• /
• 2014

The importance of energy is growing according to the energy shortage and environmental concerns. Accordingly, in order to solve the problems about the use of fossil fuel, a renewable energy sources are needed. Global renewable energy power industry's position in the renewable energy market becomes important and new technology development is also essential. MG set composed by the induction motor and permanent magnet synchronous generator for simulating a renewable energy source is based on a suitable experiment equipment. The torque generated by applying a voltage to the induction motor in MG set is used as an input of the permanent magnet synchronous generator. In Psim simulation, the characteristics of the induction motor model was formulated and the output torque characteristics of the motor was controlled using the induction motor side inverter, In this paper, the comparison analysis between Psim simulation and the output characteristics of the MG set is performed in order to identify a renewable energy power system more accurately.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2011

This paper describe development of a hardware simulator for the DFIG wind power system, which was designed considering wind characteristic, blade characteristic, and blade inertia compensation. The simulator consists of three major parts, such as wind turbine model using induction motor, doubly-fed induction generator, converter-inverter set. and control system. The turbine simulator generates torque and speed signals for a specific wind turbine with respect to the given wind speed which is detected by Anemometer. This torque and speed signals are scaled down to fit the input of 3.5kW DFIG. The MSC operates to track the maximum power point, and the GSC controls the active and reactive power supplied to the grid. The operational feasibility was verified through computer simulations with PSCAD/EMTDC. And the implementation feasibility was confirmed through experimental works with a hardware set-up.