New & Renewable Energy (신재생에너지)

Korean Society for New and Renewable Energy (한국신·재생에너지학회)
권호 표지
DOI QR코드

DOI QR Code

The Comparison Analysis between Psim Simulation and Motor-Generator (MG) Set Output Characteristics

Psim시뮬레이션과 전동기-발전기(MG) 세트의 출력특성분석

  • 임형택 (인하대학교 전기공학과) ;
  • 조다솜 (인하대학교 전기공학과) ;
  • 손효수 (인하대학교 전기공학과) ;
  • 문상수 (인하대학교 전기공학과) ;
  • 이석현 (인하대학교 전기공학과) ;
  • 김근수 (영진전문대학 전자정보통신계열) ;
  • 조철희 (인하대학교 조선해양공학과)
  • Received : 2014.06.20
  • Accepted : 2014.09.15
  • Published : 2014.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

The importance of energy is growing according to the energy shortage and environmental concerns. Accordingly, in order to solve the problems about the use of fossil fuel, a renewable energy sources are needed. Global renewable energy power industry's position in the renewable energy market becomes important and new technology development is also essential. MG set composed by the induction motor and permanent magnet synchronous generator for simulating a renewable energy source is based on a suitable experiment equipment. The torque generated by applying a voltage to the induction motor in MG set is used as an input of the permanent magnet synchronous generator. In Psim simulation, the characteristics of the induction motor model was formulated and the output torque characteristics of the motor was controlled using the induction motor side inverter, In this paper, the comparison analysis between Psim simulation and the output characteristics of the MG set is performed in order to identify a renewable energy power system more accurately.

Keywords

References

  1. Koutroulis, E., Kalaitzakis, K., 2006, "Design of a Maximum Power Tracking System for Wind-Energy-Conversion Application", IEEE Transaction on Industrial Electronics, Vol. 53, No. 2, pp. 486-494. https://doi.org/10.1109/TIE.2006.870658
  2. Gupta, J., Kumar, A., 2012, "Fixed Pitch Wind Turbine-Based Permanent Magnet Synchronous Machine Model for Wind Energy Conversion System", Journal of Engineering and Technology, Vol. 2, pp. 52-62.
  3. Kumar, A., Sandhu, K. S., Jain, S. P., Kumar, P. S., 2009, "Modeling and Control of Micro-Turbine Based Distributed Generation System", International Journal of Circuit, Systems and Signal Processing, Vol. 3, pp. 65-72.
  4. Won-Young, A., Hyung-Tack, L., Seok-Hyun, L., Gun-Su, K., Chul-Hee, J., 2013, "Analysis of the Characteristics of the Tidal current Power Generation System Using Motor-Generator Set", New & Renewable Energy, Vol. 9, No. 4, pp. 19-24. https://doi.org/10.7849/ksnre.2013.9.4.019
  5. Won-Young, A., Seok-Hyun, L., Gun-Su, K., Kang-Hee, L., Chul-Hee, J., 2013, "Analysis of the Characteristics of the Tidal Current Power Generation System Using PMSG and Water Tunnel", New & Renewable Energy, Vol. 9, pp. 44-49. https://doi.org/10.7849/ksnre.2013.9.1.044
  6. Joo-Il, H., Seok-Hyun, L., Won-Young, A., Chul-Hee, J., 2010, "Development of a Tidal Current Power Simulator based on LabVIEW", KIEE Summer Conference, pp. 1219-1220.