• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.311-318
• /
• 2005

이 논문은 다른 종류의 유도전동기 구름베어링 손상을 유도전동기 고정자 전류신호해석을 통하여 검출하고 실시간으로 손상을 진단하는 알고리즘을 개발하였다. 유도전동기 구름베어링의 손상을 검출하기 위하여 정상적인 베어링을 갖는 유도전동기, 축정열에 불량을 가지고 있는 전동기와 베어링 외륜에 구멍을 가지고 있는 2가지 종류의 비정상 베어링을 갖는 유도전동기 3set를 실험시스템을 구축하였다. 또한 유도전동기의 구름베어링시스템의 비정상적인 상태에서 고정자전류을 검출하기 위하여 TMS320F2407 DSP 칩을 이용하여 데이터 획득보드를 개발하였다. 이 고정자전류신호를 해석을 통하여 베어링 손상을 검출하기 위한 방법으로 FPT, 웨이브렛 분석 및 내적에 의한 평균신호패던에 의한 분석결과를 제시하였다. 특히 내적에 의한 신호분석을 통하여 베어링 손상 여부를 실시간으로 진단할 수 있는 새로운 알고리즘과 분석방법을 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.53-54
• /
• 2006

본 논문에서는 유도전동기의 고정자권선 고장진단을 목적으로 이상적인 전동기의 전류신호와 실시간으로 운전하고 있는 전동기 전류신호를 Park's Vector에 각각 적용시켜 Park's Vector 패턴을 만들고 패턴 피크값의 기준치와 측정치의 편차를 이용하여 오차치를 벗어날 때 고장으로 진단하는 Park's Vector 패턴의 피크값을 이용한 고정자권선의 고장진단을 시도하였다. 숙달된 작업자가 Park's Vector패턴을 보고 고장을 분석해야 했던 방법과는 달리 패턴을 비교하지 않고도 자동으로 고장을 진단하고 경보해주는 진단 방법을 제시하였다. 실제 전류분석 및 진단을 위해 상용 프로그램인 LabVIEW를 이용하였다.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.107-108
• /
• 2016

본 논문에서는 위치 센서 없이 영구자석 선형 전동기의 초기 자극 위치를 추정하는 알고리즘을 제안하였다. 이 알고리즘은 선형 전동기의 고주파 특성을 이용하여 초기 자극 위치를 추정한다. 정지 좌표계 상에서 고주파 전압을 주입하였을 때 유도되는 전류 데이터를 추출하여 분석한 결과, 전류 파형과 기준 신호와의 위상 차이가 자극의 위치에 따라 180도의 주기를 가지고 달라짐을 확인하였다. 이러한 위상 차이와 자극의 위치 사이의 관계를 이용하여 초기 위치를 추정할 수 있다. 제안하는 방법은 이동자의 움직임을 필요로 하지 않으므로 선형 전동기의 수직 방향 움직임을 필요로 하는 분야에서 위 센서 없는 제어에 효과적으로 사용될 수 있다. 실험을 통해 알고리즘의 타당성 및 효과를 검증하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.4
• /
• pp.287-293
• /
• 2002

The unexpected failure of the induction motor makes the downtime of production, and the cost of the process cessation enormous. To reduce the downtime and increase the reliability of the motor, the vibration measurements for the fault detection have been used previously. Recently motor current signature analysis(MCSA) has been adapted for the fault detection and diagnosis of the motors. MCSA provides a powerful analysis tool for detecting the presence of mechanical and electrical faults in both the motor and driven equipment. In this paper, the fault severity of the rotor bar has been derived in terms of the resistance change which is calculated from the equivalent circuit model. Results show that the fault of the rotor can be easily detected and the measured value of the resistance change is verified by the detected fault from on-site tests using MCSA for the induction motors in an iron foundry.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.661-662
• /
• 2015

최근 친환경적인 기술 개발에 대한 요구가 증가함에 따라 기존 엔진의 역할을 직접적으로 대체하게 되는 전기자동차용 전동기에 대한 연구가 활발히 진행되고 있다. 영구자석을 사용한 전동기의 경우, 계자 권선이 없기 때문에 회전자 동손이 없어지면서 효율이 높아지는 장점이 있지만 온도 상승 및 과부하 등으로 인한 영구자석의 불가역 감자로 인한 고장 가능성이 존재한다. 본 논문에서는 이러한 영구자석 감자현상을 진단하기 위한 방법 중 하나로 회전자 구속 조건에서 저전압 고주파 주입을 통한 입력전류 파형의 스펙트럼 분석을 제안한다. 제안한 방법은 전동기의 회전자를 구속시킨 상태에서 진단신호를 입력하고 인버터의 출력전류 파형을 측정하여 스펙트럼 분석을 수행하는 방법이다. 제안한 방법은 시뮬레이션을 통해 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.36-45
• /
• 2005

This paper addresses the application of motor current spectral analysis for the detection of rolling-element bearing damage in induction machines. We set the experimental test bed. They is composed of the normal condition bearing system, the abnormal rolling-element bearing system of 2 type induction motors with shaft deflection system by external force and a hole drilled through the outer race of the shaft end bearing of the four pole test motor. We have developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module is checking stator current The effects on the stator current spectrum are described and related frequencies are also determined. This is an important result in the formulation of a fault detection scheme that monitors the stator currents. We utilized the FFT(Fast Fourier Transform), Wavelet analysis and averaging signal pattern by inner product tool to analyze stator current components. Especially, the analyzed results by inner product clearly illustrate that the stator signature analysis can be used to identify the presence of a bearing fault.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.380-387
• /
• 2010

For the fault diagnosis of three-phase induction motors, we propose a diagnosis algorithm based on mutual information and linear discriminant analysis (LDA). The experimental unit consists of machinery module for induction motor drive and data acquisition module to obtain the fault signal. As the first step for diagnosis procedure, DFT is performed to transform the acquired current signal into frequency domain. And then, frequency components are selected according to discriminate order calculated by mutual information As the next step, feature extraction is performed by LDA, and then diagnosis is evaluated by k-NN classifier. The results to verify the usability of the proposed algorithm showed better performance than various conventional methods.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.75-81
• /
• 2008

The induction motor is given a great deal of weight on the industry generally. Therefore, the fault of the induction motor may cause the fault to effect another parts or another faults in the whole system as well as in itself. These are accompany with a lose of the reliability in the industrial system. Accordingly to prevent these situation, the scholars have studies the fault diagnosis of the induction motor. In this paper, we proposed the diagnosis system of the induction motor. The method of diagnosis in proposed system is extracted the feature of the current signal by the wavelet transform. These extracted feature is used the automatic discrimination system by the neural network. We experiment the automatic discrimination system using the three faults imitation that often generated in the induction motor. The proposed system have achieved high reliable result with a simple devices about the three faults.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.675-683
• /
• 2004

The motor current signature provides an important source of the information for the faults diagnosis of three-phase induction motor. The theoretical principles behind the generation of unique signal characteristics, which are indicative of failure mechanisms, are Presented. The fault detection techniques that can be used to diagnose mechanical Problems, stator and rotor winding failure mechanisms, and air-gap eccentricity are described. A theoretical analysis is presented which predicts the presence of unique signature patterns in the current that are only characteristics of the fault. The predictions are verified by experimental results from a special fault Producing test rig and on-site tests in a steel company. And this study have made new diagnostic algorithm for the operating induction motors with the test results. These developments are including the use of monitoring and analysis of electric current to diagnose mechanical and electrical problems and gave the precise test results automatically.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.86-92
• /
• 2009

As increasing of using induction motors, the induction motors faults cause serious damage to the industry. Therefore to find out faults of induction motor is recognized as important problem awaiting solution. But to make matters worse, the faults of induction motors often progress through long time. It means that early diagnosis is very important. Many researches have been progressed and general method of diagnosis is using vibration sensor to diagnose fault of induction motor. However, although it is reliability technique, it demands high price and it is difficult to use. This paper presents an implementation of technique for fault diagnosis of induction motor using wavelet transform based stator current and it is composed with algorithm that decides whether fault existence or not using C++ based on windows software. The algorithm will be accomplished in real-time using current data acquisition board and PC automatically with Neural Network algorithm.