• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.81-82
• /
• 1994

히토류 불화물인 SmF$_3$, PrF$_3$, 및 TbF$_3$를 ZnS 모체에 첨가한 박막 EL소자를 Fig.1과 같이 제작하고 발광중심의 농도변화, 열철, 증착시의 기판온도, 증착되는 막의 두께 등의 조건을 변화시켜서 각 조건에 의존하는 소자의 특성을 X-선회절분석과 분광 스펙트럼 분석으르 바탕으로 해석했다. 광학적 스펙트럼은 발광중심과 모체에 의존하며 기판온도의 변화는 발광층의 결정성 향상에 기여한다는 것을 알았다. 기판 온도의 변화에 의한 막의 결정성 향상과 열처리에 의한 발광중신의 모체내 열확산에 따른 재결정화나 비 방사성이완(non-radiative relaxation)을 일으키는 격자결함의 감소는 EL소자의 발광층내 전도전자에 영향을 미쳐 휘도와 효율의 개선이 이루어짐을 알았다. 소자의 발광층에 흐르는 전도전류와 이동전하량을 각각 Chen-Krupka회로와 Sawyer-Tower회로로 측정했다

• Elastomers and Composites
• /
• v.39 no.3
• /
• pp.234-243
• /
• 2004

The elastomeric and conductive polyurethane (PU) films were prepared by poly(propylene glycol) (PPG), toluene 2,4-diisocyanate, 3-methylthiophene (3-MT) at various preparation conditions, such as the reaction time, the $FeCl_3$ concentration, the weight ratio of the 3-MT to PU and the reaction temperature for the diffusion-oxidative reaction. The conductive poly (3-methylthiophene) (PMT) layers via the diffusion-oxidative reaction of 3-MT and ferric chloride were formed by immersing the film in organic solution of $FeCl_3$/ethyl acetate. The preparation conditions greatly affected the electrical conductivity of the 3-MT/PU composite. The effects of the reaction time and temperature on morphology and surface free energy were investigated by scanning electron microscopy (SEM) analysis and contact angle measurement, respectively. The conductivity of the composite was as high as 42 S/cm.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1213-1220
• /
• 1996

산소분압과 온도변화에 따라 비양론성 rutile(TiO2-x)의 결함모델을 전기전도 측정법에 의해 연구하였다. 산소분압과 전기전도도의 상관관계에 의하면, rutile에서 주결함은 2가로 하전된 산소빈자리와 4가로 하전된 침입형 티타늄이온이다. 117$0^{\circ}C$이상의 온도에서는 침입형 Tii…이온이 지배적인 결함이었으나, 117$0^{\circ}C$이하의 낮은 산소분압대에서는 2가로 하전된 산소빈자리가 주된 결함이었다. rutile의 전기전도 실험에서 제안된 결함모델은 본 연구팀이 O18추적자 확산실험에 의해 제안하였던 결과치와 일치하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2023

The grouting method is a method of construction for the purpose of waterproofing and reinforcing soft ground. When grout is injected into the ground, there are various types of penetration and diffusion of grout depending on the shape of the ground, the size of soil, the porosity, and the presence or absence of groundwater. the current situation. Therefore, in this study, to investigate the penetration performance of the grouting to conductive material, laboratory tests were performed on the addition of the conductive material. In the injection test, 0%, 3%, and 5% of the mixed water were added as conductive materials to the grout, and the original ground condition was composed of various types of ground composed of gravel and silica sand. Conductive grout is injected by pressure into the model ground using a dedicated injection device, and the injection time (t), pressure (p), flow rate (v) and injection amount (q) are measured, and the hardened body injected in the model ground is collected. Penetration performance was evaluated. In the results of the grout injection experiment, the amount of conductive material used and the grout injection rate showed an inverse relationship, and it was confirmed that the penetration pattern was changed according to the size of the soil particles in the model ground. The grout containing the conductive material has relatively good penetration into the ground and excellent strength and durability of the hardened body, so it was judged that it could be used as an additive for measuring the penetration range of the grout.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.673-681
• /
• 2000

Electrically conductive composites have been prepared by treating fabrics with oxidizing agent and exposing them to aniline, which deposited a substantial amount of conductive polymer within the interstices of the material. However the conductivity of the composite fabrics was limited by the irregular deposition of the conductive polymer layer. To improve the conductivity of polyaniline/nylon 6 composite fabrics, we modified the surface characteristics of nylon 6 fabrics by various plasma treatments and increased diffusion and adsorption of aniline by ultrasonic treatments. By the oxygen plasma treatment, attachment of functional groups such as C-O and C-OH increased on the surface of nylon 6 fiber, which promoted adhesion to polyaniline resulting in the higher add-on and electrical conductivity. Electrical conductivities of polyaniline/nylon 6 composite fabrics were highly increased by ultrasonic treatment, which assisted the diffusion of aniline into the inside of nylon fabrics by cavitation and vibration. Also, the effects of monomer concentration and the number of deposition cycles on the nylon 6 fabric conductivity Were investigated. As a result, the fabric conductivity increased with the monomer concentration and the number of polymerization deposition cycles.

• Electronics and Telecommunications Trends
• /
• v.16 no.6 s.72
• /
• pp.92-100
• /
• 2001

본 논문에서는 국내 기술기준에서 정하고 있는 주파수 호핑 스펙트럼 확산(FHSS) 방식을 사용하는 무선기기에 대한 전파의 질 측정항목과 그에 따른 구체적인 전도성 측정절차에 관하여 서술하였다. 본문에서는 측정에 관련된 일반적인 사항으로부터 주파수 허용편차, 점유주파수대역폭, 공중선전력, 불요발사, 호핑 주파수의 체류시간, 중첩성 및 호핑의 개수 등의 항목들에 대한 세부적인 측정절차와 함께 예시로써 블루투스(bluetooth) 기기를 이용한 실제 측정결과를 함께 제시하고 있다.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.4
• /
• pp.81-89
• /
• 2020

To understand the performance of the electrochemical device, the analysis of the mechanism of ionic conduction is important. However, due to the ionic interaction in the electrolyte and the complexity of the electrolyte structure, a clear analysis method of the ion conduction mechanism has not been proposed. Instead, a variety of mathematical models have been devised to explain the mechanism of ion conduction, and this review introduces the Arrhenius and Vogel-Tammann-Fulcher (VTF) model. In general, the above two mathematical models are used to describe the temperature dependence of the transport properties of electrolytes such as ionic conductivity, diffusion coefficient, and viscosity, and a suitable model can be determined through the linearity of the graph consisting of the logarithm of the moving property and the reciprocal of the temperature. Currently, many electrolyte studies are evaluating the suitability of the above two models for electrolytes by varying the composition and temperature range, and the ion conduction mechanism analysis and activation energy calculation are in progress. However, since there are no models that can accurately describe the transport properties of electrolytes, new models and improvement of existing models are needed.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.2
• /
• pp.165-172
• /
• 2010

Treated sewage could enable growth by providing key nutrients or seeding the sediments with enterococci strains that can grow in the environment. This study is to test the hypothesis that the flux of bacteria into the water column is rate-limited by the transfer of bacteria across the sediment/water interface. Two conceptual models are derived for the transfer of bacteria to the water column from the sediment/water interface: convective diffusion of isolated bacteria and resuspension of particle-associated bacteria. The model predictions are directly tested together with field measurements of bacteria and sediment in an effluent-dominated stream where high concentrations of enterococci in this stream originate primarily from growth of the bacteria in stream sediments. The results reveal that high concentrations of enterococci in this stream are transported primarily by resuspension of particle-associated bacteria accumulated at the sediment/water interface, either in the form of bacterial aggregates or in the form of inorganic particles.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.30-36
• /
• 2019

In this study, we reported a solid-state supercapacitor consisting of titanium nitride (TiN) nanofiber and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT-PSS) conducting polymer electrode and poly(vinyl alcohol) (PVA)-based polymer electrolyte membrane. The TiN nanofiber was selected as electrode materials due to high electron conductivity and 2-dimensional structure which is beneficial for scaffold effect. PEDOT-PSS is suitable for organic/inorganic composites due to good redox reaction with hydrogen ions in electrolyte and good dispersion in solution. By synergetic effect of TiN nanofiber and PEDOT-PSS, the PEDOT-PSS/TiN electrode showed higher surface area than the flat Ti foil substrate. The PVA-based polymer electrolyte membrane could prevent leakage and explosion problem of conventional liquid electrolyte and possess high specific capacitance due to the fast ion diffusion of small $H^+$ ions. The specific capacitance of PEDOT-PSS/TiN supercapacitor reached 75 F/g, which was much higher than that of conventional carbon-based supercapacitors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.428-428
• /
• 2010

유기 발광 소자내의 전공과 전자의 균형과 효율적인 재결합을 통한 발광소자의 효율 향상을 위한 다양한 연구가 소자의 응용에 매우 큰 영향을 주고 있다. 그러나 대부분의 전도성 유기물내에서 정공의 이동도 가 전자의 이동도 보다 100 배 정도 빠르기 때문에 발광 효율을 향상시키기 위한 효율적인 전자 주입이 요구된다. 본 연구에서는 전자주입효율을 향상하기 위하여 강한 전자 받게 역할을 하는 플러렌($C_{60}$)의 장점을 이용한 이중 전자 주입층을 제작하고 녹색 유기 발광 소자에 사용하여 발광효율의 변화를 관찰하였다. 유기 발광 소자에서 전자의 이동도를 향상하여 발광 층내로 주입되는 전자의 주입량을 증가하여 엑시톤 형성 확률을 높이기 위하여 전자 주입 층 내에 $C_{60}$을 첨가하였다. $C_{60}$만으로 이루어진 단층 전자 주입 층으로 구성된 유기발광 소자는 Al과 $C_{60}$ 계면사이에 거칠기가 큰 계면으로 인해 발생된 누설전류로 인해 Cesium flouride (CsF) 단층 전자 주입 층에 비해 낮은 발광효율을 나타냈다. 플러렌의 높은 전자전도성을 유지하며 누설전류의 흐름을 방지하기 위하여 매우 얇은 CsF층을 알루미늄 금속과 플러렌사이에 형성함으로써 플러렌과 Al 사이의 공유결합을 없애 누설전류를 줄였으며 Cs의 무거운 원자량으로 인해 전자 수송층으로의 확산되는 량이 적어 발광층에서 엑시톤의 재결합효율이 개선되어 유기발광 소자의 발광효율 향상이 나타남을 관찰하였다.