• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.256-266
• /
• 1997

The authors apply the transfer influence coefficient method to the 3. dimensional vibration analysis of beam with multi - joints and formulate a general algorithm to analyse the longitudinal, flexural and torsional coupled forced vibration. In this paper, a structure which is mainly found in the robot arms, cranes and so on, has some crooked parts, subsystems and joints, but has no closed loop in this system. It is modeled as the beam of a distributed mass system with massless translational, rotational and torsional springs in each node, and joint elements of release or roll at node which the displacement vector is discontinuous. The superiority of the present method to the transfer matrix method in the computation accuracy was confirmed from the numerical computation results. Moreover, we confirmed that boundary and intermediate conditions could be controlled by varying the values of the spring constants.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.31-36
• /
• 1975

As the size of tanker increase, the analysis and strength prediction of the transverse web frames in a tanker have become important problems. Therefore, several papers dicussed the subject and various method of analysis have been presented. Most of these studies are based on the elastic framework analysis. Framework analysis is carried out by the matrix methods. The matrix methods used most frequently are the displacement method, force method and the transfer matrix method. In this paper, the analysis is carried out by the transfer matrix method. The program has been tested by IBM 1130 and the results of example show good agreements with those by the program of stress analysis, STRESS, which was developed in M.I.T.

• 설비공학논문집
• /
• 제22권3호
• /
• pp.156-164
• /
• 2010

Combustion instability is a major issue in design of gas turbine combustors for efficient operation with low emissions. Combustion instability is induced by the interaction of the unsteady heat release of the combustion process and the change in the acoustic pressure in the combustion chamber. In an effort to develop a technique to predict self-excited combustion instability of gas turbine combustors, a new stability analysis method based on the transfer matrix method is developed. The method views the combustion system as a one-dimensional acoustic system with a side branch and describes the heat source as the input to the system. This approach makes it possible to use not only the advantages of the transfer matrix method but also well established classic control theories. The approach is applied to a gas turbine combustion system, which shows the validity and effectiveness of the approach.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1449-1457
• /
• 2009

Combustion instability is a major issue in design of co-generation gas turbine combustors for efficient operation with low emissions. Combustion instability is induced by the interaction of the unsteady heat release of the combustion process and the change in the acoustic pressure in the combustion chamber. In an effort to develop a technique to predict self-excited combustion instability of co-generation gas turbine combustors, a new stability analysis method based on the transfer matrix method is developed. The method views the combustion system as a one-dimensional acoustic system with a side branch and describes the heat source as the input to the system. This approach makes it possible to use not only the advantages of the transfer matrix method but also well established classic control theories. The approach is applied to a simple co-generation gas turbine combustion system, which shows the validity and effectiveness of the approach.

• 대한전자공학회논문지SD
• /
• 제37권8호
• /
• pp.48-56
• /
• 2000

회절격자의 인접한 반주기 길이 사이에 음의 상관관계가 있는 회절격자 반주기의 랜덤 변이가 QWS-DFB 레이저의 특성에 미치는 영향을 유효 굴절률 전달 매트릭스 방법을 이용하여 해석하였다. 상관계수가 0에서 -1로 가까이 감에 따라 랜덤 변이에 의한 회절격자 주기의 오차가 감소하면서 단일모드 안정성과 파장 정확도의 저하가 덜 심각해진다. 이는 랜덤 변이의 크기가 같다면 상관관계가 없는 전자빔 lithography 법으로 회절격자를 만들기보다는 optical lithography 법으로 만드는 것이 회절격자 주기 랜덤 변이의 영향을 줄이는 데에 유리함을 의미한다. 그리고 전자빔 lithography를 이용하여 DFB 레이저를 만들 때에 랜덤 변이의 영향을 줄이려면 분해능을 높이거나, 인접 반주기 길이의 랜덤 변이에 음의 상관관계를 주어야 한다.