• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.49-64
• /
• 1993

사출성형충전공정에서 금형구조가 단섬유배향에 미치는 영향을 예측하기 위하여 수 치모사 프로그램을 개발하였다. 유한요소 /관찰 부피 방법에 복잡한 금형에서의 유동을 해 석하고 섬유와 섬유간의 상호작용을 고려한 섬유배향텐서 변화식을 이용하여 입자 추적법으 로 섬유배향분포를 구하였다. 수치모사 결과 금형 옆벽면과 내부 방해체의 주위에 있는 섬 유들이 전단변형의 영향으로 그들주위를 따라서 정렬되려는 경향을 보였다, 두 유동이 내부 방해체를 지나 접하면서 생성된 웰드라인을 따라서 단섬유들이 정렬되려는 경향을 나타내엇 다. 그리고 수축유동에서는 흐름방향으로 정렬되나 확장유동에서는 흐름방향에 수직으로 배 열되려는 경향을 확인하였다. 위아래 벽에 의한 전단변형의 영향으로 서로 다른두 배향구조 를 보여주는 skin-core 구조를 두께방향의 속도구배를 고려한 수치모사를 통하여 예측할 수 있었다. skin구조에서는 섬유들이 흐름방향으로 정렬되고 core 구조에서는 흐름방향에 수직 으로 배향되는 것을 확인하였으며 섬유상호계수값이 커질수록 임의 배향화하는 경향을 보였다.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.81-88
• /
• 2009

The main purpose of this work is to determine characteristics of undrained shear strength of remolded marine clay at Incheon. Laboratory vane tests with remolded marine clay sampled from west coast at Incheon were performed to investigate the undrained shear strength of them being dumped for reclamation after dredging from the sea bottom. Test results were compared with the predicted values of undrained shear strength proposed by many researchers. It was found that measured results about undrained shear strength with water content was in good agreements with values proposed by Mikasa and Modified Mikasa's empirical formula.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.127-132
• /
• 2001

By the use of a similar numerical method as the forming limit strain by coating method of coated sheet metals is investigated, in which the FEM is applied and J2G(J2-Gotohs Corner Theory) is utilized as the plasticity constitutive equa-tion. Circular bonded sheet metals with dissimilar sheets on both surface planes are stretched in a plane -strain state, with various work-hardening exponent n-values and thicknesses of each layer. Processes of shear-band formation in such com-posite sheets are clearly illustrated. It is concluded that, it the bonded state, the higher limiting strain of one layer is reduced due to the lower limiting strain of the other layer and vice versa, and does not necessarily obey the rule of linear combination of the limiting strain of each layer weighed according thickness.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.103-109
• /
• 2010

This research is to determine characteristics of undrained shear strength of remolded marine clay at Incheon and Busan, representing typical marine clays in Korea. Laboratory vane tests with remolded marine clays sampled from coasts at Incheon and Busan were performed to investigate the undrained shear strength of them. Test results were compared with the predicted values of undrained shear strength proposed by many researchers. It was found that measured results about undrained shear strength with water content was in good agreements with values proposed by Terzaghi empirical formula.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.471-476
• /
• 2014

Polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS) blends were prepared using a high shear extruder to investigate their thermal decomposition and mechanical properties with shear rate and shear time. In this experiment, high shear rate, from 1000 to 3000 rpm, in blending process was applied for 10 to 40 sec, respectively. At high shear rate over than 2000 rpm, the initial decomposition temperature was dropped significantly compared to a compounded sample because of thermal decomposition of the blend by high shear. Consequently, high shear processing gave an important effect on the mechanical and thermal properties of the PC/ABS blend. In particular, elongation of the blend decreased significantly with shear rate.

• Geotechnical Engineering
• /
• v.2 no.1
• /
• pp.15-26
• /
• 1986

Consolidated undrained standard triaxial tests for two remoulded clays and one undisturbed clay were carried out in order to find out the relationship between excess pore water pressure and axial strain in mortally consolidatated saturated clays during undrained shear. Tests were performed with isotropically-normally consolidated specimens by strain controlled and stress controlled loading. As the result of this stud!'a hyperbolic function expressing the relationship between pore water pressure and strain was found out, and it showed the same form as the Kondner's hyperbolic function for stress·strain behaviour. Two parameters used for the function can be obtained by CU-triaxial test.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.437-449
• /
• 1998

In order that the steel girder and the concrete slab act as a composite structure, the connectors must have adequate strength and stiffness. If there are no horizontal or vertical separations at the interface, the connectors are described as rigid, and complete interaction can be said to exist under these idealized circumstances. However, all connectors are flexible to some extent, and therefore incomplete interaction always exists. This paper presents a practical structural analysis of composite girders with incomplete interaction by three methods. One is the stiffness matrix method derived from the general solutions of differential equation, another is the finite element analysis that alternate method of solution treats the structure as a frame and defines the spring as an additional member, and the other is the finite element analysis using principle of virtual work. The deflection characteristic of composite girder is investigated using these three methods. Also, this paper propose a simplified procedure of estimating a degree of imperfection for a composite girder with incomplete interaction using the sectional properties of girder and spring constants of shear connectors.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.45-51
• /
• 2012

The shear strength of weathered granite soils under unsaturated condition was evaluated by $K_0$ consolidated triaxial tests. Various matric suctions in the unsaturated triaxial tests were applied using suction-controlled triaxial test apparatus for weathered granite soils obtained in Daegu. Soil water characteristic curve (SWCC) laboratory tests for drying and wetting procedure were performed and van Genuchten curves were fitted by experimental results. The contribution of matric suction in unsaturated soils is directly correlated to effective stress and evaluated from SWCCs. The effective stresses were estimated from these SWCCs and the relationship between effective stress and unsaturated shear strength was determined. In the effective stress description, the unsaturated shear strength with respect to various suctions indicates unique relationship and almost the same as that of the saturated envelope.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.2
• /
• pp.5-13
• /
• 2022

The unsaturated behavior of sandy silt (SM soil) was investigated experimentally. Special attention was given to the stress-strain behavior of unsaturated weathered soil (SM) prior to failure and behavior at failure under monotonic loading. A sandy silt (SM) weathered soil containing a certain amount of fine contents distributed in Korea, was chosen to form samples with different densities of Dr=25%, 60%, and 75%. and matric suctions. The isotopically Consolidated Drain test (CD-test) was performed to maintain a constant matric suction during the shearing process. Based on the experimental results, it was qualitatively identified that the higher the relative density, the greater the virtual friction angle (ϕ^b) value and AEV (Air Entry Value) were induced. Also it is found that the internal friction angle (ϕ') is more or less constant. even if the matric suction is increased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.277-285
• /
• 2009

A series of undrained cyclic triaxial tests were carried out to investigate the cyclic shear stress strength characteristics of sands with respect to the silt content. Silty sand was collected around the basin of Nak-Dong River and remolded in laboratory with the range of silt content 0~50% in sand located. As results, with the change of silt content cyclic shear stress ratio (CSR) at N=10 showed the maximum value at 5% and the minimum at 20% in all relative density. The development tendency of the pore water pressure analyzed by the relationship cyclic ratio and pore water pressure ratio is unrelated the change of CSR varying silt content. Comparing the results of the void ratio and skeleton void ratio after consolidation, CSR varying silt content was much affected by skeleton void ratio which is known to affect shear behavior of silty sand.