• Journal of the Korean institute of surface engineering
• /
• v.45 no.3
• /
• pp.97-105
• /
• 2012

The effects of pH, types of applied current, agitation method and time, additive on the amount of co-deposited $TiO_2$ particles in the matrix were investigated. The deposition rates increased with increasing pH values, while the volume fraction of $TiO_2$ particles and the size of agglomerated $TiO_2$ particles in the composite decreased. The volume fraction of $TiO_2$ particles in the composite decreased when pulsed current of 50% duty cycle was used. And the size of agglomerated $TiO_2$ particles in the nickel matrix of pulsed current was smaller than that of DC current specimen. The volume fraction of $TiO_2$ particles in the matrix decreased with longer time by air agitation, but in case of using magnetic bar, volume fraction in the same range of time was relatively constant. The volume fraction of the electrodeposited Ni-$TiO_2$ composite in the solution containing 0.01 M Dimethylamine borane (DMAB) increased slightly with increasing agitation time regardless of agitation methods. Thermal stability of the electrodeposited Ni-$TiO_2$ composite increased with lower pH at the temperature range of $200{\sim}800^{\circ}C$, and the results showed that the amount of co-deposited $TiO_2$ relies more on the deposition rate than zetapotential of $TiO_2$ particles.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.327-333
• /
• 2016

Reinforced concrete structures have found wide usage in land and maritime applications. However, the corrosion of reinforced concrete has been recognized as a serious problem from economic and safety standpoints. In previous studies, the corrosion behavior of the inner steel bar embedded in mortar (W/C: 0.4, 0.5) was investigated using electrochemical methods. In this study, multiple mortar test specimens (W/C: 0.6) with six different cover thicknesses were prepared and immersed in flowing seawater for five years. Subsequently, equations related to the cover thickness, period of immersion, and corrosion characteristics of the embedded steel bar were evaluated using electrochemical methods. Prior to immersion, the corrosion potentials indicated an increase with increasing cover thickness, and after five years, all corrosion potentials demonstrated a trend in the positive direction irrespective of the cover thickness. However, the relationships between the corrosion potential and cover thickness were not in complete agreement. Furthermore, after five years, all of the corrosion potentials indicated values that were nobler compared to those obtained prior to immersion, and their corrosion current densities also decreased compared to their values obtained prior to immersion. It was considered that the embedded steel bar was easily corroded because of the aggression of water, dissolved oxygen, and chloride ions; a higher W/C ratio also assisted the corrosion process. The corrosive products deposited on the surface of the steel bar for five years cast a resistance polarizing effect shifting the corrosion potential in the nobler direction. Consequently, it was considered that the W/C ratio of 0.6 showed nearly same results as those of W/C of 0.4 and 0.5. Therefore, the corrosion potential as well as various parameters such as the cover thickness, period of immersion, and W/C ratio must be considered at once for a more accurate evaluation of the corrosion property of reinforced steel exposed to marine environment for a long period.

• Korean Journal of Comparative Education
• /
• v.28 no.1
• /
• pp.1-24
• /
• 2018

The objective of the article is to find the research trends and the main traits presented in the keywords on abstracts of research articles of "International Journal of Education Development" from 2002 to 2017. To do this, Text Network Analysis(TNA) was applied targeting 966 papers on the journal and the major research outcomes are as follows. First, the frequency analysis on the keywords showed that the keywords like Administration of education program, Schools and instruction, Regional public administration, Educational support service, Elementary education, and Elementary and secondary school were analyzed more than 100 times and also high in centrality degree. Second, the analysis results of the keywords presented in those research articles by development goal periods showed that several new keywords like Elementary education, Elementary and secondary school, Education quality, Secondary education, Educational planning have emerged frequently after SDGs and these keywords showed high in their centrality analysis. Third, the analysis on education level showed that the keywords like Elementary education, Administration of education program, School children were high in frequency and centrality degree in Elementary level. In secondary level, Schools and instruction, Administration of education program, Academic achievement were high, and in high level, college and university was high, respectively.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.4
• /
• pp.1-11
• /
• 2017

Most PV modules are fabricated by 6 cell-strings with solar cells connected in series. Moreover, bypass diodes are generally installed every 2 cell-strings to prevent PV modules from a damage induced by current mismatch or partial shading. But, in the case of special purpose PV module, like as BIPV (Building Integrated Photovoltaic), the number of cell-strings per module varies according to its size. Differ from a module employing even cell-strings, the configuration of bypass diode should be optimized in the PV module with odd strings because of oppositely facing electrodes. Hence, in this study, electrical characteristics of special purposed PV module with odd string was empirically and theoretically studied depending on arrangement of bypass diode. Here, we assumed that PV module has 3 strings and the number of bypass diodes in the system varies from 2 to 6. In case of 2 bypass diodes, shading on a center string increases short circuit current of the module, because of a parallel circuit induced by 2 bypass diodes connected to center string. Also, the loss is larger, as the shading area in the center string is enlarged. Thus, maximum power of the PV module with 2 bypass diode decreases by up to 59 (%) when shading area varies from 50 to 90 (%). On the other hand, In case of 3 and 6 bypass diodes, the maximum power reduction was within about 3 (W), even the shading area changes from 50 to 90 (%). As a result, It is an alternative to arrange the bypass diode by each string or one bypass diode in the PV module in order to completely bypass current in case of shading, when PV module with odd string are fabricated.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.188-194
• /
• 2000

This study was carried out to obtain the optimum cultivation conditions of wild ornamental plant resources, Dicentra spectabilis L. The altitude of the habitat was ranged from 630m to 690m in Mt. Gujeol. Most of the habitat faced toward the northeast aspect and the gradient was ranged from 25 to 33 degrees. The light intensity of Dicentra community was 14,000lux on the average, and it was tendency to decrease by foliation of other woody plants. The appearance number of Dicentra per quadrat was 30 individuals on the average, and total appearance species in all quadrat surveyed was 52 taxa. Among them, Quercus mongolica, Lindera obtusiloba, Corylus heterophylla, Cornus controversa, woody plants, Corydalis speciosa, Pseudostellaria heterophylla, Artemisia keiskeana, Dryopteris crassirhizoma, Arisaema amurense var. serratum, Carex siroumensis, and Chloranthus japonicus, herbaceous plants, were showed as dominant species. Soil acidity in the habitat was 5.15 to 5.96, and average content of soil moisture was 32.6%. The contents of average organic matter, $P_2O_5$, K, Ca, and Mg were 1.99%, 14mg/kg, 0.55me/100g, 15.2me/100g, and 3.3me/100g, respectively. Electron conductivity was ranged from 0.50 to 0.76dS/m. Also, the average air temperature of May and June was 14.2$^{\circ}C$ and 19.4$^{\circ}C$, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.145-149
• /
• 2012

Cecropin is a well-studied antimicrobial peptide that play important role as key factor in insect humoral immunity. In this study, cecropin-like antimicrobial peptide was isolated and purified from the larval haemolymph of immune-challenged japanese oak silkworm, Antheraea yamamai. To isolate antimicrobial peptide, we separated and compared acidic extracted hemolymph protein bends between control and immune-challenged larvae using SDS-PAGE analysis. In the immune hemolymph extract, but not of non-immune hemolymph, we detected differential expressed peptide band with molecular mass 4,223.01 Da. To understand this peptide better, we successfully purified this peptide using cation exchange chromatography and gel permeation chromatography. Its N-terminal amino acid sequence obtained by Edman degradation evidenced a significant degree of identity with other lepidopteran cecropins. The purified A. yamamai cecropin-like peptide showed a broad spectrum of activity against fungi, Gram-negative and Gram-positive bacteria.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.408-416
• /
• 2021

In the ultrasonic dispersion, in order to avoid direct contact of the radiation surface of ultrasonic transducers with a liquid sample, the liquid sample is separated by a glass container and it receives ultrasonic energy through an acoustic medium. The transmission efficiency of the ultrasonic energy in the multi-layered ultrasonic system is an important factor. In this study, we suggested a method that can improve the ultrasonic energy transfer efficiency by using a propylene glycol solution as a liquid matching layer in the multi-layered acoustic system. In this method, a propylene glycol solution was filled between the Langevin-type ultrasonic transducer and the luminol solution and the sonoluminescence phenomena in the luminol solution, which is caused by nonlinear effect of high power ultrasound radiated from the transducer, was examined by using a Photo Multiplier Tube (PMT). The transmission efficiency depending on the concentration of propylene glycol solution was observed, and we can see that as the concentration of the propylene glycol solution increased, the matching effect increased while the acoustic attenuation increased. It was confirmed that there is an optimal concentration compromised these two conflicting conditions, and the optimum concentration of the propylene glycol solution was determined experimentally.

• Journal of Adhesion and Interface
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2021

The importance of high capacity energy storage devices has recently emerged for stable power supply through renewable energy generation. From this point of view, the Na-air battery (NAB), which is a next-generation secondary battery, is receiving huge attention because it can realize a high capacity through abundant and inexpensive raw materials. In this study, activated carbon-based catalysts for hybrid type Na-air batteries were prepared and their characteristics were compared and analysed. In particular, from the viewpoint of resource recycling, activated carbon (Orange-C) was prepared using discarded orange peel, and performance was compared with Vulcan carbon, which is widely used. In addition, a Pt/C catalyst (homemade-Pt/C, HM-Pt/C) was synthesized using a modified polyol method to check whether the prepared activated carbon can be used as a supported catalyst, and a commercial Pt/C catalyst (Commercial Pt/C) and electrochemical performance were compared. The prepared Orange-C exhibited a typical H3 type BET isotherm, which is evidence that micropore and mesopore exist. In addition, in the case of HM-Pt/C, it was confirmed through TEM analysis that Pt particles were evenly distributed on the activated carbon supported catalyst. In particular, the HM-Pt/C-based NAB showed the smallest voltage gap (0.224V) and good voltage efficiency (92.34%) in the 1st galvanostatic charge-discharge test. In addition, the cycle performance test conducted for 20 cycles showed the most stable performance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.17-32
• /
• 2019

Sales representatives of automobile company play a key role in the circulation system. Given the characteristics of the good, consumers demand high-quality information and guides from the salespersons when they decide to purchase an automobile. Sales representatives provide service to the customers in accordance with their needs to help purchase decision-making process. Therefore, a sales representative's personal competence have a significant effect on sales performance. Based on this hypothesis, we assumed that personal competence of a salesperson has a positive correlation with sales performance. An empirical analysis was conducted to test the hypothesis. This study classifies personal competence into 4 independent variables((1) sales technique professionalism (2) salesperson's attitude and relationship with customers (3) emotion utilization (4) emotion control) and measures the correlation with the dependent variable(sales performance). To verify the relationship, we set and modified the hypothesis based on the precedent studies and researches. In addiction, a survey was conducted targeting 300 local salespersons from Gyeonggi-Gangwon region. 268 valid samples were used and analyzed with SPSS WIN24.0 statistical program. As a result of an empirical analysis, it turned out that sales technique professionalism and emotion utilization have positive correlation with sales performance. However, the result failed to support the assumption that sales representative's attitude and relationship with customers and emotion control have positive correlation with sales performance. At last the result revealed that personal competence should be considered as an important determinant of recruitment specification for sales representatives.

• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1171-1180
• /
• 2018

Korea's water transmission system is operated by the nonpressure flow method that flows from highlands to lowlands due to the nature of Korea with many mountainous areas. In order to store water in the highlands, the water pumps are installed and operated. However, In this process, a lot of electrical energy is consumed. therefore, it is necessary to minimize the energy consumption by optimizing the size and operation schedule of the water pumps. The optimal capacity and operation method of the water pump are affected by the size of the tank (distributing reservoir). Therefore, in order to economically design and operate the water transmission system, it is reasonable to consider both the construction cost of the water pump and the tank and the long-term operation cost of the water pump at the step of determining the scale of the initial facilities. In this study, the optimum design model was developed that can optimize both the optimal size of the water pump and the tank and the operation scheduling of the water pump by using the genetic algorithm (GA). The developed model was verified by applying it to the water transmission systems operated in Korea. It is expected that this study will help to estimate the optimal size of the water pump and the tank in the initial design of the water transmission system.