• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.565-570
• /
• 2021

A soft-decision decoding scheme of a channel code for correcting an error occurring in a receiver of a digital communication systems is proposed. A method for efficiently decoding by use of the linear and arithmetic structure of linear block codes is presented. In this way, the probability of decoding errors has been reduced. In addition, it is possible to reduce the complexity of decoding as well. Sufficient conditions for achieving optimal decoding has been derived. As a result, the sufficient conditions enable efficient search for candidate codewords. With the proposed decoding scheme, we can effectively perform the decoding while lowering the block error probability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.20-26
• /
• 2001

In this paper, we design tunnel inner section displacement measurement system which is composed of potentiometer-type displacement sensors, microcontroller-based intelligent sensing head and host computer for the management system and acquisition data. Multiple node communication bus connects the intelligent sensing heads with the host computer. For safe and re1iab1e network operation we use daisy-chain configuration, termination resistor, fail-safe biasing circuit. For tole enhancement of system utilization, we use modbus protocol. The acquisition data are transmitted to host computer and managed by database. Several data request conditions and sorting conditions are provided by management software. The utilization of designed system is confirmed by experiment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.29-36
• /
• 2007

According to the using of electric power source such as solar cell, fuel cell and wind energy, consumer is supplied from distributed generator and electric power company. Therefore, it is required that the real-time measurement and control instrument for those distributed generator. In this paper, describes the development of measuring equipment for the power system with distributed generator. The equipment has real-time measure function and communication with PC via USB port, which is used for various purposes such as investigation of transient state, and is compared with measurement instrument to verify the reliability.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.254-255
• /
• 2006

최근의 전력시스템 분야에서는 IT기술의 혁신적인 발전과 향후 전개될 유비쿼터스 네트워크 사회에서의 전력시스템 분야의 역할 및 발전 방향에 대한 많은 의견이 있었다. 이러한 노력은 IT기술과 유비쿼터스 네트워크 기술을 전력분야에 적용하여 지능화된 전력네트워크 감시 및 제어시스템을 구현하는 방향으로 전개되고 있다. 전력시스템을 구성하는 주요 시설물을 감시하고 유지하기 위한 방안으로 센서 및 센서네트워크의 구현을 통한 지능형 감시 체계를 구현하는 방법이 논의되고 있다. 전력계통시스템을 감시하기 위하여 사용되는 각종 센서 및 액츄에이터에서 계측된 데이터를 규격화하는 방법을 규정한 IEEE 1451 과 디지털변전소의 통신을 위한 프로토콜로 여겨지는 IEC 61850 규격은 전력설비내의 센서 및 센서네트워크를 구성하는 주요 프로토콜로서 프로토콜간의 상호 연계 및 변환 기술의 개발은 네트워크 시스템의 운용 성능에 직결된다. 그러므로 IEEE 1451과 IEC 61850의 연구를 통하여 최적의 지능형 전력네트워크 구현하기 위한 변환기술이 필요하다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.541-544
• /
• 2004

지난 99년 이후 친환경적이며 경제적이고 효율적인 대체 교통수단의 개발이라는 목표 하에, 차세대 근거리 교통수단으로 각광받고 있는 경량전철 시스템 적용을 목표로 무인 변전소 기반의 전력감시제어 시스템(SCADA)을 개발하였다. 차세대 변전소 기술 적용이라는 취지 하에 각종 IED들과의 연계는 모두 통신으로 처리하여 시스템의 고기능화를 추구하였고, Network 이중화를 통하여 시스템의 신뢰성을 제고하였으며, CCTV 및 각종 보안센서를 적용하여 배전반의 무인화 운전 및 원격 상시 감시 기능을 구현하였다. 이로써 신뢰성 있는 시스템 기반의 무인 변전소 기술 확립이라는 측면에서 현재 진행되고 있는 변전소 자동화 기술에 일조하며, 나아가 향후 에너지 IT산업기술의 기반이 되리라 사료된다.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.959-964
• /
• 2018

In this study, a study is conducted on a monitoring system that can control the environment of plants using sensors in conjunction with the LED light system and the plant growth control system. To verify the performance of the developed plant growth system, an experiment was conducted on the characteristics of energy efficiency, data transmission rate, and light volume control. The experiment resulted in a satisfactory result by controlling more than 80% energy efficiency, 1Mb/sec wireless communication speed, and 5 levels of optical control. The proposed system can be applied to LED plant facilities and will contribute to the automation of agriculture by organizing an automated system for production efficiency and labor cost reduction for future commercialization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.861-863
• /
• 2014

Fingerprinting technique exists at the position assumption system for the service of indoor location-based. However, there is a problem it takes a long time to build fingerprinting map. We need to verify that received signal of WAP(wireless access point) is similar at all times in a similar space in order to solve these problems. This paper proposes a plan that is able to build fingerprinting map by using the received signal data of WAP. To do this, change the positon of WAP in the same space, It is confirmed the process of change of the RSSI corresponding to the distance. We also confirmed that the RSSI collected from elsewhere in the space a similar change in the same manner.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.6
• /
• pp.149-161
• /
• 2003

Partially blind signature scheme allows the signer to insert non-removable common information into his blind signature. Blind signatures providing with both users privacy and data authenticity are one of key parts of information systems, such anonymous electronic cash and electronic voting as typical examples. Partially blind signature, with which all expired e-cash but for still-alive can be removed from the banks database, copes well with the problem of unlimited growth of the banks' database in an electronic cash system. In this paper we propose an efficient ID-based partially blind signature scheme using the Weil-pairing on Gap Diffie-Hellman group. The security of our scheme relies on the hardness of Computational Diffie-Hellman Problem. The proposed scheme provides higher efficiency than existing partially blind signature schemes by using three-pass protocol between two participants, the signer and requesters also by reducing the computation load. Thus it can be efficiently used in wireless environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.173-180
• /
• 2022

Approximate Computing is a promising method for designing hardware-efficient computing systems. Approximate multiplication is one of key operations used in approximate computing methods for high performance and low power computing. An approximate 4-2 compressor can implement hardware-efficient circuits for approximate multiplication. In this paper, we propose an approximate multiplier with low area and low power characteristics. The proposed approximate multiplier architecture is segmented into three portions; an exact region, an approximate region, and a constant correction region. Partial product reduction in the approximation region are simplified using a new 4:2 approximate compressor, and the error due to approximation is compensated using a simple error correction scheme. Constant correction region uses a constant calculated with probabilistic analysis for reducing error. Experimental results of 8×8 multiplier show that the proposed design requires less area, and consumes less power than conventional 4-2 compressor-based approximate multiplier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.608-614
• /
• 2014

A pattern recognition (PR) system is addressed for non-intrusive load monitoring. To effectively recognize two appliances (for example, an electric iron and a cook top), we propose a novel feature extraction method based on high order moments of power signals. Simulation results confirm that the PR system with the proposed high order moment features and kernel discriminant analysis can effectively separate two appliances.