• Explosives and Blasting
• /
• v.21 no.3
• /
• pp.73-80
• /
• 2003

암반발파에 사용하고 있는 전기식 뇌관과 비전기식 연결뇌관 및 번치 커넥터(Bunch connector), 점화구, 에멀젼류 폭약이 지상에서 기폭 될 때 발생하는 소음을 비교 분석하였다. 에멀젼류 폭약의 폭발소음과 화공품의 기폭소음에 대한 추정식을 도출하였다. 에멀젼류 폭약의 폭발 소음 예측은 반대수 자승근 환산식, 번치 커넥터, 전기식 뇌관 및 비전기식 연결뇌관 및 점화구는 전대수식이 적합한 것으로 판단된다. 소음원으로부터 동일한 거리에서의 소음은 점화구, 비전기식 연결뇌관, 전기식 뇌관 및 번치 커넥터 순으로 높았다. 소음원으로부터 약20∼30m거리의 범위에서 번치 커넥터의 기폭소음은 에멀젼류 폭약 0.250kg의 폭발소음보다 약15.6∼20.2dB(A) 낮고, 비전기식 연결뇌관 보다 약13.5∼16.0dB(A) 높고, 전기식 뇌관 보다는 약6.5∼7.5dB(A) 높게 됨을 알 수 있었다. 점화구는 약20m 거리에서 약 7dB(A)이하 이었다. 에멀젼류 폭약의 폭발과 번치 커넥터의 기폭소음에 미치는 주(主)소음원은 에멀젼류 폭약의 약량과 번치 커넥터의 도폭선임을 확인하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.20-26
• /
• 2007

A high ignition voltage is required to turn on the metal halide discharge(MHD) lamp. The igniter with high frequency resonance circuit needs more devices, such as sidac, arc-gab, SCR(silicon control rectifier), DIAC and so of which increase the complexity and decrease the reliability of the ignitor. This paper analyzes and designs a simple LC resonance type igniter without any extra switch devices. Moreover, the igniter will not influence the steady-state operation of the lamp. Through the mathematical analysis, the computer simulation and experiment results of a prototype ballast for 1[kW] metal halide lamp(MHL) lamp, the proposed igniter was verified to be effective.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2043-2045
• /
• 2005

현재 점화코일은 소형화 및 친환경성을 위해 에폭시 몰딩 절연층으로 변화되었다. 그러나 에폭시 몰딩으로 변환됨에 따라 점화코일 내부 절연층에 대한 절연진단 및 노화에 대한 정확한 진단의 어려움으로 적절한 교체시기를 예측하기 더욱 어려워졌다. 그로 인해 점화장치부분에 대한 예기치 못한 사고는 대형사고 유발을 초래할 수 있다. 이에 본 논문에서는 비파괴검사의 일종인 부분방전을 이용한 열화검출을 연구하기 위해 열화에 따른 위상각-방전전하량-방전빈도수의 분포 특성을 조사하였다. 또한 방전 발생의 분포가 동일 조건에서도 매우 불규칙성을 가지고 있으므로 데이터의 정량화를 위해 불규칙적인 통계처리를 위한 와이블 분포를 사용하여 기기의 고장시간예측을 조사하였다.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.10-15
• /
• 2013

This paper, we analyzed that the measured data of the radiated power spectrum of electromagnetic waves of the normal spark ignition system and the spark ignition system with feed through type ceramic condenser. The results show that the strength of power spectrum radiated from the system with feed through type ceramic condenser is weaker than the normal system, and the density of power spectrum radiated from the system with feed through type ceramic condenser is smaller than the normal system. From these results, the feed through type ceramic condenser can reduce the electromagnetic waves radiating from the spark ignition system which is the spurious emission, and it can be concluded that the ignition coil of the spark ignition system generating high voltage pulse is equivalent to the radio frequency oscillator which is oscillating high frequency from a electronic point of view.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.7-14
• /
• 2004

The metal halide lamps are now widely used in the application and commercial lighting due to their attracting properties such as good color rendering and high efficiency. But, they have a serious problem of acoustic resonance using high frequency operation and they need a high voltage to ignite. So, they have not been applied to indoors. Over the past few years, a considerable number of studies have been conducted on the electronic ballast with hot restarting and resonance phenomenon. But, Very few attempts have been made at adaptive ignition method according to lamp state. In this paper is proposed electronicballast for metal halide lamps with an igniter for adaptive ignition. The proposed electronic bllast can generate a different ignition voltage according to the arc tube state.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.77-85
• /
• 1987

본 논문은 단기통 4사이클 전기점화기관에서 가스교환 과정이 체적효율에 미치는 영향에 대하여 연구한 것이다. 가스교환 과정의 수학적 모델을 설정하고 수치해석을 수행한 결과 체적효율은 가스교환과정과 관련되는 밸브 개폐시기(1,2)보다는 흡배기관의 압력에 의하여 더 큰 영향을 받는 다는 것을 알 수 있었다. 실험에 있어서는 각각 밸브 개폐시기가 다른 3종류의 캠을 사용하였 으며 수치 해석결과와 실험결고가 비교적 잘 일치하였다.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.18-23
• /
• 2004

This paper describes the minimum ignition limits for propane-air 5.25 Vol.% mixture gases in low voltage inductive circiuts. The improved effects on the ignition limit are studied by parallel safety components(resistors) for propane-air 5.25 Vol.% mixture gas in low voltage inductive circuits. The experimental devices used in this test are the IEC type spark ignition test apparatus. The minimum ignition limits are controlled by the values of current in inductive circuit. Energy supplied from electric source is first accumulated at the inductance, it's extra energy is working as ignition source of the explosive gas. The improved effects on the ignition limit are respectively obtained as the maximum rising rate of 330% by composing parallel circuits between inductance and resistor as compared with disconnecting inductance with the safety components. The more values of inductance increase the higher improved effects of ignition limit rise. The less values of resistor the higher improved effects of ignition limit rise. It is considered that the result can be used for not only data for researches and development of intrinsically safe explosion-proof machines which are applied equipment and detectors used in dangerous areas but also for datum for its equipment tests.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.85-92
• /
• 1998

In this paper, we design a sequential system controller, which is capable of processing parallel sequence, on the basis of analysis of control specification described by Petri Net with incidence matrix. The sequential system controller consists of input conditioning unit and petri net control unit which is composed of the token control unit and firing unit. The firing unit determines the firing condition of the transfer signal on the basis of the token status of token control unit. By the proposed scheme, we can easily develop and implement the sequential system controller of automated warehousing system, automated transportation system, elevator system, and so on, as it is possible to modify control specification by changing simply the content of incidence matrix ROM and to expand easily functional capacity as the result of modular design.design.

• 전기의세계
• /
• v.67 no.9
• /
• pp.6-10
• /
• 2018

• Product Safety
• /
• s.48
• /
• pp.70-71
• /
• 1996