• 전기의세계
• /
• v.34 no.5
• /
• pp.292-298
• /
• 1985

전력 MOSFET은 산업 전반에 걸쳐 수요가 급증하고 있고, 멀지않아 장래에 컴퓨터, 통신, 메카트로닉스, 자동차등의 발달로 인하여 갑작스레 수요가 폭발하리라 예상하고 있다. 전력 MOSFET은 10년도 채 못되는 짧은 역사를 지니고 있기 때문에 국내에는 거의 소개된 바가 없으며, 이를 사용한 시스템을 생산하는 업체도 알려진 바 없다. 그러나, 에너지 자원이 빈곤한 우리나라에서는 전력 MOSFET을 사용한 절전형 전원이나 조절기의 개발이 시급하리라 생각된다. 또한 전력MOSFET은 LSI급의 IC제조시설을 활용하여 제작이 가능하기 때문에, 비교적 소규모 시설 투자에 의해 생산시설을 갖출 수가 있다. 따라서, 국내에서도 반도체 기술의 다양화 측면에서라도 전력MOSFET의 개발을 신중히 검토해야 할 때가 왔다고 생각한다.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2082-2084
• /
• 1998

This paper presents a microcontroller-based electronic neon ballasts which is highly suitable for a multi-use and low power consumption by performing economical hardwares and variable software algorithms. Result of this study has the following functions : brightness control, frequency variable output, automatic lightening control, low power characteristics.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.116-123
• /
• 2010

The Study of the Railway-saving electric water heaters to replace electric heaters when combined, Separate bathroom with hot water in winter, as coaches, without the need to warm up with hot water may be.To improve passenger service can tell. High-efficiency energy saving energy from furnace. Due to fuel cost savings and business improvements come true. Can prevent pollution.Heating the room next to railway vehicle utilization is expected to nopeulgeot.Is expected to expand gradually.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.87-95
• /
• 2006

In this study, in order to obtain high qualify of electric power, single phase active filter which is composed of Zig-Zag transformer and three phase bridge rectifier and capacitor at the secondary of its transformer to be able to reduce the components of the zero phase current and the third harmonic current in neutral line and power line respectively. By connecting this filter to the Zig-Zag transformer and nonlinear load, their third harmonic components due to the nonlinear loads were reduced.

• The Magazine for Energy Service Companies
• /
• s.37
• /
• pp.86-89
• /
• 2005

삼성에버랜드 에너지절감형 '증기재압축시스템' 개발 · 상용화 성공/ 삼천리 산업기술대 열병합 도입 계약 체결/ LS산전 호남화력에 FD Fan 고압 인버터 설치/ (주)하이세스 절전기 '하이세스' 출시/ 현대차 김관중 동력팀장 '움직이면 커지는 엔트로피 이해' 책자 발간/ 산업자원위원회 에너지기본법 통과/ (주)케너텍 전기판매, 민간 사업자 1호 달성/ 일진전기(주) 최진용 대표 '산업포장'/ 포스코 에너지절감으로 원가 경쟁력 향상/ 울산시 삼성석화 등 에너지 절약 우수업체 선정/ 시민사회 '에너지를 생각하는 사람들의 알찬 모임' 화제/ 신재생에너지센터 공기관 대상 신재생에너지의무화 사업 설명회/ 에너지관리공단 열병합발전 설계자 대상 교육 실시

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.157-159
• /
• 1993

Recently, in the industrial applications, accurate arc control for welding machine are developed. This paper describes arc control of inverter-fed arc welding machine, and efficiency of inverter-fed arc welding machine. It is shown that the arc pressure and are stiffness of the pulse arc nay be as much as several times that of the equivalent dc are. Finally, the theoretical predictions are compared with test. The potential of such a welding machine is also described.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.119-124
• /
• 2006

A novel high frequency insulated soft switching PWM DC-DC converter circuit is proposed and then it is achieved the high-efficiency. This converter does not use the o(citing current of a high frequency transformer but use inductance. Then it realizes a widely stable zero voltage switching operation with the use of a novel ON-OFF control method at synchronized rectification power MOSEFETs of the high frequency insulated transformer secondary. Therefore, it is brought over 97[%] measurement efficiency by proposed DC-DC converter.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.27-35
• /
• 1994

As a study on the method for energy-saving of the neon sign, this paper has systematically investigated the quantity of energy-consumption of the sign through a long period of time, according to the changes of the sign's ON/OFF speed, time ratio, etc. One neon sign(1 [kW] was built up for this. For this experiment, the ON/OFF periods(T) were set to 1.0,2.0,4.0 and 8.0[sec), and the ON time ratios(D) to 25, 50, 75 and 100 [%] respectively. Energy Analyzer was used for more accurate measurement. As the result, we found that the energy consumption of the sign had no effect on the ON/OFF period (T) when T was more than 2.0(sec), but that the energy consumption was decreasing when T was less than 2.0[sec]. The greatest value in the energy-saving of the sign appeared when the values of T and D were small altogather. And under the conditions, the energy consumption with T=1.0[sec) and D= 25[%] decreased 83.0[%] in comparison with the continuous ON case.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.51-55
• /
• 2013

The purpose of this study is to find the causes of malfunctions and defective operation of printed circuit boards(PCBs) built into home refrigerators to perform power saving functions. This study performed an electrostatic test of a PCB built-in using an Auto Triggering system; lightning and impulse tests using an LSS-15AX; and an impulse test using an INS-400AX. From the analysis of a secondarily developed product, it was found that electrostatic discharge(ESD) caused more malfunctions and defective operations than electric overstress(EOS) due to overvoltage. As a result of increasing the condenser capacity of the PCB circuit, withstanding voltage was increased to 7.4 kV. In addition, this study changed the power saving mode and connected a varistor to the #2 pin of an IC chip. As a result, the system consisting of all specimens of a finally developed product was operated stably with an applied voltage of less than 10 kV. This study found it necessary to perform quality control at the manufacturing stage in order to reduce the occurrence of electrostatic accidents to IC chips built into a PCB.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.191-200
• /
• 2010

The "intelligent internet power outlets" realized in this study use Internet environment to connect electrical and electronic products to the Net as well as to enable remote monitoring and control. They also have temperature and light sensors, and even offer scheduling options by means of a universal calendar run by an inner real-time timer. Furthermore, they control 4 outlets handling 4 external input conditions and infrared remote control with easy-to-use functions for home automation control. The user interface is equipped with an embedded Web server and UDP protocol handler, and which also allows special control programs be used with the Web browser. Thus, installing this real-time power control function with optimal scheduling and various communication functions will provide you with energy-efficient power outlets outfitted with the increasingly popular "standby power" electric power efficiency.