• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.63.1-63.1
• /
• 2019

1953년에 밀러와 유리는 초기 지구 대기와 해양을 모사하여 단순한 기체 조합으로부터 유기분자를 얻었다. 생명의 기원을 논할 때 언급되는 밀러유리 실험을 교육 현장에서 활용하고 현대적으로 해석하고자 2014년에 Parker 등에 의해 재조명되어 단순화된 장치로 실험실을 설계하여 전기방전 실험을 진행하였다. 실험장치에 사용한 유리기구는 산, 염기로 각각 세척하고 200도씨 오븐에 건조하였다. 300ml 의 물을 반응 플라스크에 넣고, 83mmHg(11kPa) 압력의 진공상태에서 암모니아 100mmHg, 메탄 200mmHg, 질소 100mmHg를 주입하였다. 총 16일의 실험 기간중 66시간 방전을 하였다. 전기 방전 색이 하늘색에서 보라색으로 바뀌는 것을 확인하고 분광스펙트럼을 얻었으며, 시간에 따른 대기조성의 변화를 해석하고자 한다. 이 실험은 교내 창의연구활동 (R&E와 졸업개인연구)의 하나로 2015년부터 학생 주도적으로 진행되고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.493-499
• /
• 2009

The assembled structures of pressure rice cooker are consisted of oven, top heater plate and locking ring. Since pressure is applied to the assembled structures, it should be necessary to check the safety. In this paper, structural analyses are performed from design and fracture point of view. For the design point of view, linear analysis is performed to assembled structure and for the fracture point of view, nonlinear analysis is performed to locking ring. From these results safety evaluation technique for the assembled structures of pressure rice cooker is proposed.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.201-213
• /
• 2014

This study showed the quality characteristics of chicken breast meat(CB) and leg meat(CL) with various kinds of existing cooking methods and double layer pan filled with Phase Change Materials(PCM) heating. Steaming resulted the highest moisture contents of 63.9% and 62.1% each in CB and CL. Also, steaming showed the lowest with 1.3% and 8.6% of crude fat in CB and CL(p<0.05) respectively. Crude protein content of CB in charcoal heating and grilling of CL had the highest values of 37.9% and 30.5% each. In the test of crude ash, grilling showed the highest with 2.4% in CB(p<0.05) and oven heating and charcoal heating was the highest with 1.3% in CL(p<0.05). In the test of cooking loss, charcoal heating showed much higher with 33.52% and 41.16% in CB and CL each than the other cooking treatments. And in case of shear force test, $5.93kg/cm^2$ in CB and $6.80kg/cm^2$ in CL were the highest scores in grilling. In the test of color, L value of CB prepared by steaming showed the highest scores of 78.31(p<0.05) while CL by oven heating was the highest of 10.00 in a value. In the overall acceptability test of 9 point-scale sensory evaluation, CB prepared by charcoal heating showed the highest score of 7.25 points in boiling, but the lowest score of 6.00 points in steaming(p<0.05). CL by charcoal heating resulted the highest score of 7.71 points but had no significant difference.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.100-106
• /
• 2008

Typical household load have nonlinear loads including a personal computer, video, refrigerator, microwave oven, TV, and audio set. These nonlinear loads generate harmonic currents and create distortions on the sinusoidal voltage of the power system. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probablistic approach is the most commonly used method to solve time varying harmonics. This paper provides in depth analysis on harmonics field measurement of the typical household loads and harmonics simulation using EDSA program for the case study.

• Radiation Oncology Journal
• /
• v.8 no.2
• /
• pp.155-162
• /
• 1990

Spiral microwave antennas have been developed and measured the thermal distribution in agar phantom. The design has been configured in three types, 3 cm $\phi$ applicator with 24.5 cm length (A type),4 cm $\phi$ with 12.2 cm (B type) and 6 cm $\phi$ with 24.5 cm length (C type). The relative specific absorption rate (SAR) measured in phantom have been used to estimate the depth and profile of effective heating. The applicator of copper antenna with 4 cm $\phi$ diameter and 12.2 cm length (B type) has the most homogeneous (FWHM=3.5 cm) and heating into deep site ($D_{eff}=4\;cm$).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.33-39
• /
• 2008

From a CCRF-excited zinc vapour laser with overlapped DC-discharge were emitted following 6 laser lines: two blue at 491.162[nm] and 492.403[nm], an orange at 589.433[nm] and three infrared lines at 747.879[nm], 758.848[nm] and 773.25[nm]. The discharge parameters were determined for an optimal laser operation. At a RF-power of 400[W] with the frequency 13.56[MHz] the optimal temperature of the oven lay between 780[K] and 800[K], the He-pressure between 3.5[kPa] and 5.5[kPa].

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.95-102
• /
• 2008

Typical household loads have nonlinear loads including a personal computer, video, refrigerator, microwave oven, TV, and audio set. These nonlinear loads generate harmonic currents and create distortions on the sinusoidal voltage of the power system. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probablistic approach is the most commonly used method to solve time varying harmonics. This paper provides in depth analysis on harmonics field measurement of the typical household loads for one year period and the survey is conducted with the objectives to identify the trends of harmonic distortion level present and indentify the future trends of metering in the presence of nonsinusoidal current and voltage waveforms in the system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.173-176
• /
• 2005

Teijin사의 HT100-B60의 폴리카보네이트(polycarbonate) $100{\mu}m$, I-Component사의 PES(polyethersulfone) $200{\mu}m$, Ferrania사의 PAR(polyacrylate) $100{\mu}m$와 $200{\mu}m$를 사용하였다 열팽창계수의 차이로 인해 공정상 기판의 가열과 냉각시 열응력이 발생하여 기판의 크랙발생의 원인이 된다. 이를 최소화하기 위해 모든 공정이 시작하기 전에 pre-annealing을 통해 plastic 기판의 시간별 공정을 실시하였다. plastic film의 annealing time은 0h, 12h, 24, 40h, 50h, 60h, 70h, 80h으로 사간을 달리하여 오븐 안의 진공상태를 조성하여 실험하였다. Thermal evaporator로 Al을 약 170nm 증착하였으며 (주)동진 세미캠의 DTFR-1011s DR LCD용 감광액을 Spin Coating Spread(500rpm/6sec), Spin(3000rpm/20sec)으로 coating하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.43-53
• /
• 2012

This study deals with the conventional consolidation methods like preloading and vertical drains. For it, Two different mechanism, i.e., increasing of permeability and evaporating of pore water were studied. The marine clays excavated in Incheon were heated at low temperature($90^{\circ}C$) to increase the permeability. Also, Microwave oven and high-temperature electric heater were used for pore water evaporation. Several points raised from the experiments. To fix them, the electric heating system was revised to upgrade the field application and drain efficiency of pore water, and the marine clays were heated by revised electric heater at high temperature($250^{\circ}C$). From Experimental result showed that results, high-temperature heater induced the pore water evaporation and displayed the excellent consolidation behavior. In addition, the cone index of heated clays were increased about 19 times, which suggested that electric heating system could be applied for ensuring the trafficability of heavy equipments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.84-84
• /
• 2009

$BaTiO_3$는 perovskite 구조를 가지는 대표적인 강유전체 재료로서 MLCC (Multi Layer Ceramic Capacitor), PTC thermistor등에 널리 사용되어지고 있다. 최근 고용량 MLCC의 상업화와 함께 나노크기를 갖는 tetragonal phase의 $BaTiO_3$ 입자를 합성하기 위한 다양한 제조방법이 제시되고 있다. 또한 유전특성과 온도특성 및 신뢰성을 향상시키기 위해 많은 첨가제들이 연구되어지고 있다. 따라서 본 연구에서는 희토류 원소인 $Y_2O_3$를 첨가하여 유전특성 및 온도특성을 향상시키고자 하였다. 본 실험에서는 150nm 크기를 갖는 pure $BaTiO_3$ 분말을 사용하고 $Y_2O_3$의 양은 0.02 ~ 0.1wt%로 변수를 주어 첨가하였으며, 최적의 소결 조건을 찾기 위하여 1200, 1230, $1250^{\circ}C$에서 소결을 진행하였다. 실험방법으로는 균일한 혼합을 위하여 Iso-alcohol을 이용하여 48시간 ball-mill 하였으며 오븐에서 건조 후 ${\Phi}15$로 성형하여 소결을 진행하였다. 실험결과로는 $Y_2O_3$ 첨가량이 0.02wt% 부터 상온부터 상전이 온도 부근의 유전율 기울기는 완만해 지는 것을 확인할 수 있었으며, 소결시편의 정방정비 (tetragonality)도 뚜렷하게 나타났다. $Y_2O_3$ 첨가랑이 0.1 wt% 일 때는 첨가량의 증가로 인해 강유전성이 상쇄됨을 나타냈다. 이는 $2450^{\circ}C$에 이르는 매우 높은 용융온도와 $2350^{\circ}C$까지 상전이가 는 $Y_2O_3$를 미량 첨가할 때, 고온에서 높은 화학적 안정성과 내열성을 가져 온도 안정성이 향상된 것으로 판단된다.