• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1007-1009
• /
• 1993

In this paper, The hybrid method in order to reduce the unknown varible for 3D eddy current calculation is proposed. we adopt the current vector potential(T) and the magnetic scalar potential($\Omega$) as field variable, and adopt image charge method for symetric boundary condition in BEM. We apply the hybrid method to electromagnet for levitation system and analyze the charateristics of eddy current airgap flux distribution, attractive and magnetic drag force according to velocity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.360-361
• /
• 2006

This paper describes a wire and wireless network sensor for temperature and humidity measurements. The network sensor comprises PLC(Power Line Communication) and RF transmitter(433MHz) for acquiring an internal (on-board) sensor signal, and measured data is transmitted to a main processing unit. The network sensor module is consist of MEMS sensor, 10-bit A/D converter, pre-amp., gain-amp., ADUC812 one chip processor and PLC/RF transmitting unit. The temperature and humidity sensor is based on MEMS piezoelectric membrane structure and is implemented by using dual function sensor for smart home and smart building.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1267-1269
• /
• 2005

This paper presents the design for improving performance of the high-precision Magnetic levitation system. Motor performance on various design schemes such as thickness and magnetizing patterns of the permanent magnets, pole pitch, length of air gap, turn number of windings, and thickness of the aluminum-core has been investigated in detail by using FEM(Finite Element Method) Simulation-based DOE(Design of Experiments) method is also applied in order to reduce the large number of analysis according to each design variable and consider the effect among variables. The design in all aspects is proposed by an optimization algorithm using regression equation derived from the simulation-based DOE.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1327-1329
• /
• 2005

This paper presents a gam optimization method using genetic algorithm(GA) for a magnetic levitation(Maglev) controller. GA uses the integral of square error(ISE) as performance index. The plant dynamics are described and modelled by mathematical equations. Also, the system apparatus for the Maglev system are described. Using the derived model, to optimize the feedback gains of conventional state feedback controller(SFC), GA is simulated with SIMULINK model. finally, using the optimized feedback gains, SFC is applied to the Maglev system. From the results, we can see that GA can give a solution for the better control performance for the Maglev system.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1613-1615
• /
• 2005

Maglev equipped with permanent magnets on the moving part can be levitated by the magnetic repulsion between Halbach array and conducting plate when this vehicle is running. This paper deals with the fundamental principles of the eddy-current magnetic repulsion system and the force characteristics to the change of the permanent magnet array and conduction bar.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.68-70
• /
• 1995

The controller for magnetically suspended vehicles considering the speed characteristics is presented. Generally, the attraction force of magnet is determined by input current and air gap. However, when MAGLEV runs at high speed, induced eddy currents in the rail decrease the attraction force. Thus control characteristics of MAGLEV become deteriorated. Therefore, the variation of attraction force according to speed must be considered. Thus we analyzed the speed characteristics of the magnet by FEM. Also, we study on the control characteristics according to speeds, and design the controller considering the decline of levitation force using Neural Network.

• Annual Conference of KIPS
• /
• 2012.04a
• /
• pp.119-122
• /
• 2012

이종 멀티코어 프로세서는 각기 상이한 마이크로아키텍처, 캐시 사이즈, 클록 주파수를 갖는 다수의 코어 또는 프로세싱 유닛으로 이루어진 마이크로프로세서이다. 저에너지 소비가 산업계의 키워드로 부상하고 있는 이 시기에 이종 멀티코어는 동종 멀티코어보다 더 낮은 전력을 소비하고 성능면에서도 더 나은 프로세서로 주목받고 있다. 하지만, 동종 멀티코어에서의 동작을 가정하는 현재의 운영체제의 작업 스케줄러로는 이종 멀티코어의 이종적인 특성을 잘 활용할 수 없다. 본 논문에서는 이종 멀티코어 프로세서 작업 스케줄링에 관한 연구를 다면적으로 분석하여 각 방법의 장점과 단점을 개략적으로 정리하고 관련된 이슈들을 살펴보고자 한다.

• Information Display
• /
• v.19 no.6
• /
• pp.41-51
• /
• 2018

Micro LED, which is emerging as a next generation display, is difficult to commercialize due to various technical problems to date. In particular, transfer technology that transfers small LED to a display substrate in micro units is a key technology that can bring commercialization and is an important variable. The core of transfer technology is to move the LED quickly and accurately to the desired location. Therefore, it is necessary to pay attention on the transfer technology which is the most important task of Micro LED, and we analyzed and summarized the transfer technology using Elastomer Stamp which is one of the advanced transfer technologies.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.257-258
• /
• 2013

VoIP(Voice over Internet Protocol)는 인터넷과 같은 IP 망에서 음성과 영상을 전송하기 위한 기술이며, 차세대 망에서의 음성, 테이터 통신을 위한 기술로 부상되고 있다. 따라서 VoIP 응용은 인터넷 망을 이용하는 다양한 단말기들 사이의 음성 및 영상 통신을 위하여 더욱더 많이 사용되어 질 것으로 예상된다. 본 논문에서는 VoIP 기술을 여러 분야에 적용할 수 있는 응용성과 실제 다자간 음성통신의 구현 방법에 대해서 기술하겠다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.107-108
• /
• 2019

모바일 엣지 컴퓨팅(Mobile Edge Computing, MEC)은 높은 컴퓨팅 성능을 요구하는 작업을 모바일 장치에서 가까운 MEC 서버로 오프로딩함으로써 모바일 서비스에 높은 계산 요구량을 효율적으로 제공할 수 있는 기술로 부상하였다. 본 논문에서는 실행 대기 시간과 장치 에너지 소비를 줄이기 위해 여러 가지의 독립적 작업을 통해 MEC 시스템에 대한 작업 오프로드 일정 및 전송 에너지 할당을 최적화하는 기법을 제안한다. 시뮬레이션 결과로 MEC 시스템에서 사용 가능한 무선 및 계산 리소스가 상대적으로 균형 잡혀있는 경우 작업 오프로딩 일정이 더 중요하다는 것을 확인했다.