• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.10-20
• /
• 2020

This study aims to analyze the developed characteristics of the knowledge and information of gardens through garden or flowering plant books compiled in the 15th and 19th centuries of Joseon Dynasty. Diachronically analysis of the garden or flowering plant books classified the characteristics in which knowledge and information about gardens are developed by the period, and looked at the factors. The results are as follows; First, the relationship between the authors who compiled the garden or flowering plant books had similar characteristics to the genealogy of Realist School of Confucianism(實學) in the Joseon Dynasty. Kang, Hee-An's practical features influenced later realist school of confucianism scholars. Lee, Su-Gwang has accumulated knowledge of the garden through his experience of traveling the diplomatic envoy to China. Since then, Hong Man-sun's ideology has been related to Charles, a member of the Southerners. Seo Yu-gu was also able to accept Realist School of Confucianism in an integrated way through the Jungnong school's theory and interaction with the Jungsang school. Ryu, Jung-Lim's relationship with the Jungnong school emerged as he added to the 『Jeungbosanrimgyeongje(增補山林經濟)』. Second, the 『Yanghwasorok(養花小錄)』, 『Jibongyuseol(芝峯類說)』 「Hwuimok(卉木)」, 『Hangjeongrok(閑情錄)』, 『Sanrimgyeongje(山林經濟)』 「Yanghwa(養花)」, 『Jeungbosanrimgyeongje(增補山林經濟)』 「Yanghwa(養花)」, 『Hwaamsurok(花庵隨錄)』 and 『Imwongyeongjeji(林園經濟志)』 「Yewonji(藝畹志)」 contain garden plant characteristics, cultivation methods, and management methods. The 『Imwongyeongjeji(林園經濟志)』 「Seomyongji(贍用志)」, 「Iunji(怡雲志)」, 「Sangtaekji(相宅志)」 contain details on the location selection of gardens, the layout of facilities, how to create them and materials. The description of these garden or flowering plant books was found to be the most common introduction with 55 percent, followed by methodologies(42.8%), the Lichi Theory(理氣論, 15.5%), the classification(12.4%), and the convention(1.9%). Third, based on the importance of knowledge and information on gardens, the garden or flowering plant books related to the period were classified as early period, including 『Yanghwasorok(養花小錄)』, 『Jibongyuseol(芝峯類說)』 which were compiled before the 17th century. The 18th-century compiled 『Sanrimgyeongje(山林經濟)』 and 『Jeungbosanrimgyeongje(增補山林經濟)』 were classified as middle period, and the 19th-century compilation of 『Imwongyeongjeji(林園經濟志)』 was classified as late period. The garden or flowering plant books were cited the contents of ancient Chinese books, the author's experiences and opinions contained in the preceding period in later garden books. And the reinforcement of garden knowledge was made to reflect the agricultural technology and expertise developed at the time of writing. Fourth, based on analysis of the development and acceptance of knowledge information in garden by period, In the early period was dealing with floriculture as a way to explore the logic of things. Later, in the 18th century, a vast influx of garden knowledge information came from China. Among scholars, they secured justification for garden creation as part of various knowledge-seeking activities, which expanded their expertise in gardens. In response to the trend of gardening in the 19th century, professional books were written based on knowledge and information on gardens that were collected in the past, and systems were established such as the collection and management of garden plants, construction methods, enjoying methods, and self-realization.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.246-263
• /
• 2019

The stone Buddha statue of Sangunsa Temple at Bukhansan in Goyang, Gyeonggi Province, is an excellent example of stone Buddha statues created in the late 15th century. On the base of the figure, there is an inscription, which informs that it was produced in 1497. In recognition of this significance, it was recently designated as a tangible cultural asset in Gyeonggi-do. Thus, this paper tried to evaluate the value of the statue by analyzing iconography and style. The characteristics of a typical 15th-century style that the Buddha statue of Sangunsa Temple shows are the form of ushnisha, the way clothes are worn, the form of a w-shaped chest muscle, and the simple lotus pedestal. On the other hand, the elongation of the waist and the disappearance of the waistband on undergarments are new forms of Buddha statues in the 16th century. Besides, parting the hair in the middle of the head and leaf-shaped short ribbon draped on undergarments are unique features that only appear on the statue of Sangunsa Temple. Sangunsa has been known to be built in the early 18th century based on Bukanji compiled by Seongneung in 1745, and Bongeunbonmalsaji composed in 1943. However, the statue was created in the late 15th century, before the establishment of the temple in the early 18th century. Therefore, this paper briefly reviewed the history of Sangunsa Temple, focusing on the initial period, referring to the historical sites and the relics that were passed on to the temple, as well as the literature records. The data newly referred to in the study are as follows: Sangunsa Stone Pagoda, presumed to be from the Goryeo Dynasty; the Stone Buddha Statue of Sangunsa; Wooden Amita Triad Buddha Statue of Sangunsa. According to the data and contrary to previously-held beliefs, Sangunsa Temple is believed to have been operating since the Goryeo Dynasty. It can be inferred through analysis of the stone Buddha statue of Sangunsa Temple that the size of the Temple before the 18th century was not very large.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.193-206
• /
• 2014

The objectives of the project are to increase farmers' income through GAP and to reduce the loss of agricultural produce, for which the Korean partner takes a role of transferring needed technologies to the project site. To accomplish the project plan, it is set to implement the project with six components: construction of buildings, installation of agricultural facilities, establishment of demonstration farms, dispatching experts, conducting training program in Korea and provision of equipments. The Project Management Committee and the Project Implementation Team are consisted of Korean experts and senior officials from Department of Agriculture, Myanmar that managed the project systematically to ensure the success of the project. The process of the project are; the ceremony of laying the foundation and commencing the construction of training center in April, 2012. The Ribbon Cutting Ceremony for the completion of GAP Training Center was successfully held under PMC (MOAI, GAPI/ARDC) arrangement in SAl, Naypyitaw on June 17, 2012. The Chairman of GAPI, Dr. Sang Mu Lee, Director General U Kyaw Win of DOA, officials and staff members from Korea and Myanmar, teachers and students from SAl attended the ceremony. The team carried out an inspection and fixing donors' plates on donated project machineries, agro-equipments, vehicles, computers and printer, furniture, tools and so forth. Demonstration farm for paddy rice, fruits and vegetables was laid out in April, 2012. Twenty nine Korean rice varieties and many Korean vegetable varieties were introduced into GAP Project farm to check the suitability of the varieties under Myanmar growing conditions. Paddy was cultivated three times in DAR and twice in SAl. In June 2012, vinyl houses were started to be constructed for raising seedlings and finished in December 2012. Fruit orchard for mango, longan and dragon fruit was established in June, 2012. Vegetables were grown until successful harvest and the harvested produce was used for panel testing and distribution in January 2013. Machineries for postharvest handling systems were imported in November 2012. Setting the washing line for vegetables were finished and the system as run for testing in June 2013. New water tanks, pine lines, pump house and electricity were set up in October 2013.

• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2009

In this study, both evaluations by visual imaging for exterior view of coating and by EIS were executed for epoxy primer coated specimens deteriorated by accelerated test, and comparison and analysis were carried out for 2 evaluation methods. In the comparison between total damaged area ratio acquired by image processing method and deterioration point, higher deterioration points were appeared for rusted specimens than for non-rusted specimens. It is attributed that deterioration point per unit area ratio given for rust is higher than for peeling. In the comparison between total damaged area ratio and EIS result, impedance of coating was largely decreased as about TEX>$10^4{\Omega}{\cdot}cm^2$ or less when rust area ratio is more than about 0.1%, and blistering area ratio is more than about 3%. Charge transfer resistance ($R_{ct}$) and double layer capacitance ($C_{dl}$) values were appeared for all specimens except 2 ones, which shows that water is accumulated and steel substrate is corroded at coated film-steel interface. In the comparison between deterioration point and EIS result, more than 10 points as deterioration point were given for specimens of below $10^6{\Omega}{\cdot}cm^2$ of impedance at low frequency. For specimens deteriorated by NORSOK cyclic test, impedance was lowest of all, though deterioration point was not high. It is thought to be attributed that coating system and accelerated deterioration condition of cyclic tested specimens were different from those of main specimens. From the result, it is thought that coating resistance can be relatively more decreased than deterioration degree estimated from exterior view under more severe corrosion environment or in the present of more complex deterioration factors.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.11-21
• /
• 2011

Purpose : Localization using MRI is difficult due to susceptibility induced artifacts caused by metal electrodes. Here we took an advantage of the B0 pattern induced by the metal electrodes by using an oblique-view imaging method. Materials and Methods : Metal electrode models with various diameters and susceptibilities were simulated to understand the aspect of field distortion. We set localization criteria for a turbo spin-echo (TSE) sequence usingconventional ($90^{\circ}$ view) and $45^{\circ}$ oblique-view imaging method through simulation of images with various resolutions and validated the criteria usingphantom images acquired by a 3.0T clinical MRI system. For a gradient-refocused echo (GRE) sequence, which is relatively more sensitive to field inhomogeneity, we used phase images to find the center of electrode. Results : There was least field inhomogeneity along the $45^{\circ}$ line that penetrated the center of the electrode. Therefore, our criteria for the TSE sequence with $45^{\circ}$ oblique-view was coincided regardless of susceptibility. And with $45^{\circ}$ oblique-view angle images, pixel shifts were bidirectional so we can detect the location of electrodes even in low resolution. For the GRE sequence, the $45^{\circ}$ oblique-view anglemethod madethe lines where field polarity changes become coincident to the Cartesian grid so the localization of the center coordinates was more facilitated. Conclusion : We suggested the method for accurate localization of electrode using $45^{\circ}$ oblique-view angle imaging. It is expected to be a novelmethodto monitoring an electrophysiological brain study and brain neurosurgery.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.22-28
• /
• 2013

In the present study, the possibility of recovering and recycling the silicon carbide(SiC) from a silicon sludge by removing Fe and Si impurities was investigated. Si and SiC were separated from the silicon sludge using centrifugation. The separated SiC concentrate consisted of Fe, Si and SiC, in which Fe and Si were removed to recover the pure SiC. Leaching with acid/alkali solution was compared with the vapor-phase chlorination. The Fe concentration removed in the SiC was 49 ppm, and it was separated by leaching with 1 M HCl solution at $80^{\circ}C$ for 1 h. The Si concentration removed in the SiC was 860 ppm, and it was separated by leaching with 1M NaOH solution at $50^{\circ}C$ for 1 h. The SiC concentrate was chlorinated in a tubular reactor, 2.4 cm in diameter and 32 cm in length. The boat filled with SiC concentrate was located at the midpoint of the alumina tube, then, the chlorine and nitrogen gas mixture was introduced. The Fe and Si concentration removed in the SiC were 48 ppm and 405 ppm, respectively, at $500^{\circ}C$ reactor temperature, 4 h reaction time, 300 cc/min gas flow rate, and 10% $Cl_2$ gas mole fraction.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.67-74
• /
• 2015

In this study the nanofiber was prepared by electrospinning method with polyvinylidene fluoride (PVdF) and a completely dispersed solution of graphene oxide (GO) in the mixed solvent of dimethylformamide (DMF) and acetone. The $0.4{\mu}m$ pore size microfiltration flat membrane was made by increasing layers of the PVdF/GO composite nanofiber. Also, transmembrane pressure (TMP) was measured in order to evaluate fouling of the PVdF/GO composite membrane which was introduced GO reducing biological fouling with the intrinsic antibacterial characteristics. The permeate experiments were carried out simultaneously for the PVdF/GO and commercialized CPVC (chlorinated polyvinyl chloride) flat membranes with $0.01m^2$ effective area in the activated sludge solution of MLSS 4,500 mg/L. TMP of PVdF/GO membrane decreased up to 79% lower than that of CPVC for $10L/m^2{\cdot}h$ permeate flux without air supply. Also, for the case of run/stop operational mode, TMP of PVdF/GO membrane decreased up to 69% lower than that of CPVC for $10L/m^2{\cdot}h$.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2008

Bio-implantable devices such as heart pacers, gastric pacers and drug-delivery systems require power for carrying out their intended functions. These devices are usually powered through a battery implanted with the system or are wired to an external power source. This paper describes an inductive power transmission link, which was developed for an implantable stimulator for direct stimulation of denervated muscles. The carrier frequency is around 1MHz, the transmitter coil has a diameter of 46mm, and the implant coil is 46mm. Data transmission to the implant with amplitude shift keying (ASK) and back to the transmitter with passive telemetry can be added without major design changes. We chose the range of coil spacing (2 to 30mm) to care for lateral misalignment, as it occurs in practical use. If the transmitter coil has a well defined and reliable position in respect to the implant, a smaller working range might be sufficient. Under these conditions the link can be operated in fixed frequency mode, and reaches even higher efficiencies of up to 37%. The link transmits a current of 50 mA over a distance range of 2-15 mm with an efficiency of more than 20% in tracking frequency. The efficiency of the link was optimized with different approaches. A class E transmitter was used to minimize losses of the power stage. The geometry and material of the transmitter coil was optimized for maximum coupling. Phase lock techniques were used to achieve frequency tracking, keeping the transmitter optimally tuned at different coupling conditions caused by coil distance variations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1070-1074
• /
• 2014

According to IEEE 1662(2009), IPS is a power system where all prime movers produce electrical power that is shared among propulsion, mission, and ship service loads. Discriminating attributes of integrated power systems are flexibility of movers' arrangements, mechanical decoupling between prime movers and propulsors, an increased level of energy conversion and transmission redundancy, and flexibility of redistributing available electrical power for future electronic weapons. IPS could have various steps of power that can be produced at optimal load of movers. In this study, an evaluation method for optimal arrangement of movers was investigated when an IPS warship is projected. The two factors are utilized for the quantitative analysis which are the weight of system as the fighting power and the fuel consumption per year as the economic feasibility. And also the ways for arrangement of system were studied according to existence of small diesel generator. The evaluation method that decides the optimization level is based on the DEA(Data Envelopment Analysis)

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.581-588
• /
• 2018

In this article, electrochemical investigation of the transfer reaction of ionizable cefotiam (CTM), an antibiotic molecule across a polarized water/1,2-dichloroethane (water/1,2-DCE) interface was studied. Ion partition diagram providing the preferred charged form of CTM in either water or 1,2-DCE phase was established via the voltammetric evaluation of the transfer process of differently charged CTM species depending upon the pH variation of aqueous solutions. Thermodynamic information including the formal transfer potential and formal Gibbs transfer energy values in addition to important pharmacokinetics including partition coefficients of ionizable CTM were also evaluated. In particular, the current associated with the transfer of CTM present at pH 3.0 aqueous solution proportionally increased with respect to the CTM concentration which was further used for developing CTM sensitive ion sensor. In order to improve the portability and convenient usage, a single microhole interface fabricated in a supportive polyethylene terephthalate film was used of which hole was filled with a polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) gel replacing 1,2-DCE, a toxic organic solvent. A dynamic range of $1-10{\mu}M$ CTM was obtained.