• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.700-703
• /
• 1999

Thls paper describes the process of corona discharge in $SF_6$ gas. The discharge characteristm such as electric field distribution, electron density, ion density and current denslty distribution are considered as time go by, The result show that difference between electronegative gas and nonelectronegative gas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.835-840
• /
• 2011

In this study, a disk-type piezoelectric transformer was fabricated. Its diameter was 50 mm and thickness was 4.5 mm. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface of driving and generating part on the top surface was divided into 2, 4 and 8 pieces. The electrical characteristics with its electrode variation was measured in the range of load resistance of $100{\Omega}{\sim}10_{K\Omega}$. We investigated quantitively the influence of the set-up voltage ratio.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.200-204
• /
• 2006

본 연구에서는 새로 고안된 NOT-AND 논리에 의한 방전 논리 gate PDP의 입력 DC 방전특성에 대해 고찰하고 동작특성을 해석하였다. 새로 고안된 방전 AND gate는 방전 경로에 따른 전극사이의 전위차의 변화로 AND 출력을 유도한다. 이러한 방전 논리 소자를 가지는 PDP에서는 직류방전이 논리게이트의 역할을 한다. 실험결과 이 DC 입력방전을 위해 priming 방전을 인가한 경우가 인가하지 않은 경우에 비해 방전지연시간이 1/3로 단축되며 방전개시전압은 1/2로 감소하였다. 또한 이 priming 방전은 방전종료후 $30{\mu}s$ 정도까지 영향을 미친다. 그리고 이 직류방전의 시간적, 위치적 방전특성을 측정한 결과, 방전에 따른 시간적 거리의 변화는 상당한 영향을 미치나 인접 전극들의 위치적인 영향은 거의 미미하다는 결론을 얻었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.806-808
• /
• 2004

본 연구에서는 MEMS 공정에 의해 제작된 실리콘 멤브레인 위에 스크린 프린팅법을 이용하여 압전 후막을 제작, 그 특성을 관찰하였다. 실리콘 웨이퍼의 후면을 각각 다른 4가지의 크기로 식각하여 멤브레인을 제작하였다. 제작된 멤브레인 위에 하부전극 Ag-Pd를 스크린 프린팅법으로 형성하고, 그 위에 압전 후막을 스크린 프린팅하여 열처리 하였다. 제작된 압전 후막위에 MFM(Metal-Ferroelectric-Metal)구조의 액츄에이터를 제작하기위해 상부전극으로 Pt를 스퍼터링으로 증착하였다. 제작된 마이크로 액츄에이터는 SEM(Scanning Electron Microscope)으로 구조분석하고, RT66A와 MTI2000으로 동작특성을 해석 하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.75-81
• /
• 2000

This paper describes the partial discharge due to particles in $SF_6$ gas. A model GIS chamber was designed and manufactured. The partial discharge and breakdown phenomena due to the particles between electrodes were observed and partial discharge signals were detected, using an ultrasonic sensor. The analysis of the electric field by the states of the particle inserted between the electrodes, were also carried out. The partial discharge was observed at end while the particle was moving in $SF_6$ gas. The partial discharge in micro-gap grows to arc, and after all, it can cause a breakdown.The electric field strength was the highest in case that the particle was vertically attached on the conductor, and the lowest in case that it was horizontally attached on the enclosure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.719-731
• /
• 1991

This paper introduces a relatively simple computer simulation method for analyzing trajectory of electron beam in cylindrical electrode of the CRT, which outputs the cutoff voltag, beam current, spot size and plots out the trajectory, rom the input data on physical construction and applied voltages of electron gun. In order to improve computing speed in obtaining potential distibution, the authors have ivided the space into seveal setos and allocated different mesh sizes epending on the acuracy required to each sector and applied the finite difference method in calculation. The plot of trajectoy obtained from the simulation provided useful insight into the focusing mechanism of the CRT. The computed and measured result including beam curent. spot sizs and cutoff voltages for several model guns have ageed within eperimental error. The simulation program enables the designer to compare the effects of varied electrode shpe without the epense of building an actual gun and may be appli in esigning and implementing the electron gun assemply.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.197-201
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, did not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, research on design and manufacturing of JIG and Fixture for molybdenum pin manufacturing and inspection is treated.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1195-1196
• /
• 2015

최근 급격한 산업사회의 발달로 인해 전력기기의 종류와 설치개수가 꾸준히 증가하고 있다. 수많은 고전압 전력기기의 운용으로 인해 발생되는 온실가스는 지구온난화와 같은 환경파괴를 유발시키는 등의 문제를 발생시키고 있다. 고전압 전력기기의 전기적 절연을 위해 주로 사용되는 SF6와 같은 기체 절연체는 온실가스를 유발시키며, 현재 여러 나라에서는 고전압 전력기기로부터 방출되는 CO2의 양을 최소화하기 위한 많은 연구가 진행되고 있다. 특히, 일본 교토에서 180여개의 국가가 온실가스 감축의 의무를 나누고자 교토의정서를 채택하였고, 온실가스를 유발하는 SF6를 대체할 수 있는 친환경 기체 절연체에 대한 연구가 활발히 진행 중이다. 그 중에서도 본 연구에서는 친환경 기체 절연체인 Dry-air의 절연파괴와 부분방전 개시전압 특성을 분석하였다. 다양한 구 전극의 크기와 전극 사이 간격 조건에서 AC 절연파괴 및 부부방전 개시전압에 대한 실험을 수행하였다. 또한, 유한요소해석을 통해 산출한 전계 이용률을 고려하여 절연파괴와 부분방전 개시전압에 대한 특성을 분석하였다. 실험결과, 구 전극의 크기와 전극 사이 간격이 증가할수록 절연파괴와 부분방전 개시전압의 크기가 커지는 것을 알 수 있으며, 부분방전이 먼저 개시되고 절연파괴로 이어는 경향을 확인할 수 있었다. 또한, 전계 이용률이 0.52 이상에서는 부분방전이 개시되지 않고 곧바로 절연파괴로 이어지는 것을 확인할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.475-482
• /
• 2004

We have fabricated a LiNbO$_3$ travelling-wave optical modulator. The travelling-wave modulator consisted of M-Z(Mach-Zehnder) interferometer and CPW(Coplanar Waveguide) travelling-wave electrodes. Design of CPW electrodes were performed by SOR(Successive Over Relaxation) to obtain the conditions of Microwave effective index and impedance matching. The fabricated modulator had -3.2 dB insertion loss, and S$_{11}$ below -15 dB up to 12 GHz, S$_{21}$ better than -3 dB upto 7 GHz. It turned out that the optical response showed the 3 dB bandwidth of above 12 GHz.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.2
• /
• pp.76-81
• /
• 2005

This research approached electrical characteristics of organic light emitting diodes getting into the spotlight by next generation display device. Basic mechanism of OLED's emitting is known as that electron by cathode of lower work function and hole by anode of higher work function are driven and recombine exciton-state being flowed in emitting material layer passing carrier transport layer In order to make many electron-hole pairs, we must manufacture device in multi-layer structure. There are Carrier Injection Layer(CIL), Carrier Transport Layer(CTL) and Emitting Material Layer(EML) in multi-layer structure. It is important that regulate thickness of layer for high luminescence efficiency and set mobility of hole and electron.