• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.13-21
• /
• 2014

This study on condominium complex will adopt the quantitative assessment of the influence on the environment throughout the entire life cycle of buildings. This paper applies input-out analysis in order to analyse embodied energy regarding input of materials at material production phase. Also, it calculates environment load at use and demolition and destruction Phases of buildings as analysing energy consumption. The study categorises environment load as six impact categories and undertakes environmental impact evaluation. The consequence shows that the environment load of multi-unit dwelling takes up 88.2% out of the entire environment load of condominium complex. Also, as a result of analyzing the environmental impact of the life cycle of condominium buildings, it was found that such environmental impact comprised of about 11.96% of all industries in Korea that had an environmental impact.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.2
• /
• pp.35-43
• /
• 2014

The application of the Life Cycle Impact Assessment (LCIA) methodology to analyze the environmental burden of appling the digestates to corn field including different swine waste treatment systems was investigated. The first part of LCA is an inventory of parameters used to emissions released due to the system under investigation. In the following step, the Life Cycle Impact Assessment, the inventory data were analyzed and aggregated in order to finally get one index representing the each environmental burden. Each corn field applied with the aerobic and anaerobic digestates including different swine waste treatment systems was used as an example for the life cycle impact analysis. With analyzing the agricultural environmental burden, it observed that the effect of corn field applied aerobic digestate including digestion system was 7.6 times higher at eutrophication effects, but global warming potential effect was 0.9 times less than its applied anaerobic digestate.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.650-660
• /
• 2017

In this study, simplified LCA (life cycle assessment) tool was developed to increase accessibility and availability on LCA timber construction. The result of simplified LCA was compared with commercial program on LCA (Simapro.7) to verify its availability. As a result of evaluating environmental impacts with the Life Cycle Inventory of all processes, gap between LCA and simplified LCA tools of timber construction was about 1%. Therefore, the simplified LCA tool could analyse greenhouse gas emissions of timber construction and to expand number of data set through improved conveniency of users for developing database of timber construction in Korea. The reduction effects of greenhouse gas emissions of timber construction was about 53% of total emission offset up to construction phase. The results of this study would support decision making process to expand to timber construction policy to showcase environmental friendliness of timber construction. It was expected to contribute to response to the New climate regime in forestry.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.698-705
• /
• 2017

Environmental impact of a mobile phone charger containing recycled plastic was quantified using LCA and the environmental benefits from the use of recycled and virgin plastic were compared. The assessment considers potential environmental impacts across the whole life cycle of the charger including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages and quantified six environmental impact categories; Abiotic depletion; Acidification; Eutrophication; Global warming; Ozone layer depletion; and Photochemical oxidants creation. The study showed that the environmental impacts of the use stage accounted for 94.4% and 70% in the resource depletion and global warming impact categories, respectively, and the environmental impacts of the pre - manufacturing stage accounted for more than 98% in the other impact categories. The main cause of the environmental impacts in the use stage was electricity consumed by the charger. The main cause in the pre-manufacturing stage was PBA (Printed Board Assembly) and external case manufacturing. In order to quantify the environmental benefits of recycled PC (Polycarbonate) in the exterior case, the environmental impacts of 1 kg production of recycled PC and virgin PC were evaluated. The environmental impact on the abiotic depletion of the recycled PC is estimated to be 30% compared to the virgin PC, and the impacts on the other impact categories of the recycled PC were less than 5% of the virgin plastic. Sensitivity analysis was performed for 12 items including site data and assumptions made. The sensitivity of each item was less than 10%. The results of this study confirm that designing compact and light PBA, improving charging efficiency, and use of recycled plastic are important design factors to reduce the environmental impact of a charger.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.494-500
• /
• 2006

Life Cycle Assessment(LCA) is an environmental assessment tool for evaluating environmental burdens associated with products, processes and activities from the raw material acquisition stage to the end-of-life stage. End-of-life stage as well as other processes requires a reliant database in order to increase the confidence in the LCA results. In this study, the flow of Personal Computer(as PC) in the end-of-life stage was examined and the database of two scenarios has been established, i.e. one is part reuse and the other is no part reuse, in the end-of-life phase of PC. Also, key environmental issues were identified by carrying out LCA on a PC in the end-of-life phase for eight environmental impact categories. The 'ozone layer depletion' contributes the highest environmental impact due to generation of $Cl_2$ gas during the incineration of waste plastics. In addition, the scenario 1(part reuse) is more environmentally sound than the scenario 2(no part reuse) when comparing two scenarios.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.59-79
• /
• 2005

recently, world is progressing large quantity consumption with continuous Innovation and economic growth and pollution is accelerated at these process. Increase of industry activity and service that is point of corporation activity is discharging environmental pollutants at whole process to manufacture of end product and exhaust process from acquisition of raw material for accompanied product production hereupon. At the same time, being promoting resources consumption by that use much raw material, As a result, is becoming obstacle factors in sustainable development. So, corporation's responsibility for environmental protection is emphasized. Corporation which must prepare in green round or environmental problems should consider environmental effects that is happened over whole life of products that include waste treatment after raw material acquisition and use as well as selling end product simply. A Life Cycle Assessment techniques is normalized and standardized in International Standard Organization for technical committee 207(TC 207) world widely, and effort to apply in corporation's activity because mastering LCA techniques in domestic several corporations is undergone actively. Coming into effect of Kyoto's Protocol and International Organization for Standard 14000 series revision are presenting new survival principle in competition between country or corporation. LCA technique may become very useful means to corporation which wish to attempt environment management in real condition that awareness for environment is important. Also, An LCA to each product is going to cause big effects in corporation's whole image as well as competitive power raising for single product. Therefore, this research wishes to examine some instances for the future competitive product development at the estimation of environmental friendliness using LCA techniques and more theoretical considerations of the LCA techniques that can dominate corporation's fate.

• Clean Technology
• /
• v.14 no.2
• /
• pp.144-151
• /
• 2008

Life cycle assessment was carried out to evaluate the environmental values of dimethylas a diesel alternative fuel with the assumption of dimethyl ether production from natural gas via synthesis gas. The whole life cycles from raw material acquisitions to the final usages of diesel and dimethyl ether were involved in the assessment. Inventory analysis showed that the most significant environmental impacts came from resource depletions and air emissions. Impact assessment revealed that dimethyl ether was environmentally better in the aspect of human health and ecosystem quality but worse in resource depletions compared with diesel fuel. Suggestions for environmental improvement of dimethyl ether as a diesel alternative fuel were prepared based on the assessment results.

• Clean Technology
• /
• v.23 no.4
• /
• pp.388-392
• /
• 2017

In this study, a quantitative environmental impact assessment for the production process of breathable film was conducted employing Life Cycle Assessment (LCA) methodology. Among the various categories, Global Warming (GW) accounted for the highest impact (97%) followed by Human Toxicity (HT). And the key substances of various impact categories included HDPE, PP, and electricity. In the production process, the high impact resulted from mixing process (57%), lamination process (29%), and extruder process (10%). To improve environmental impact, it is necessary to design a new process system that reduces the amount of electricity used and that increases production yields, if raw materials such as HDPE and PP owe excluded.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.9
• /
• pp.527-533
• /
• 2017

Environmental concern about smart phone is growing because it has short product life span while having intensive production technology and cost. In this study environmental impact of the smart phone is quantified using the LCA methodology based on the ISO 14040 series standards. The assessment considers potential environmental impacts across the whole life cycle of the smart phone including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages. The pre-manufacturing stage is the most dominant life cycle stage causing the highest environmental impacts among all 10 impact categories assessed. The global warming impacts of the smart phone in the pre-manufacturing, distribution, use, manufacturing, and end-of-life stages were 52.6% 23.9%, 15.7%, 7.0%, and 0.8%, respectively. Sensitivity of the life cycle impact assessment results to the system boundary definition and assumptions made were quite high. Three components of the smart phone, PCB, battery, and display module were identified as the key components causing majority of the potential environmental impact in the pre-manufacturing stage. As such the slim and light-weight design and the use of environmental friendly materials are important design factors for reducing the environmental impact of the smart phone.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.499-508
• /
• 2010

This study proposed a life cycle impact assessment index that can indicate the environment-related information of the product in monetary value such that the national geographical, environmental, and social features are fully reflected based on a damage-oriented model. First, the estimation process was classified into characterization, damage assessment, and integration stages considering the six biggest impact categories: resource depletion, global warming, ozone depletion, acidification, eutrophication, and photochemical oxidant creation. Moreover, this study came up with the 16 category endpoints related to the 6 impact categories, and the damage function, to the 4 largest safeguard subjects. The integration indices of finally identified impact categories were KRW 21.8/kg Sb, KRW 6.19/kg$CO_2$, KRW 53,000/kg CFC-11, KRW 13,100/kg $SO_2$, KRW 2,310/kg ${PO_4}^{3-}$, and KRW 3,030/kg $C_2H_4$. Using the results of this research, environmental impacts based on the environmental load generated throughout the entire life cycle of a product can serve as a single index in monetary value; thus enhancing understanding and utilization of the results of life cycle impact assessments.