• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.247-251
• /
• 2006

By becoming 21st century which run be charactered as highly industrialized society which spreads diversification and individualization, there have been elevation of income level and increase of time for leisure activity by introducing 5 working days system. And this brings out increasing of aquatic leisure activity population and the contents of the leisure becomes very active. Static indoor activity which was the main current of the leisure activity in the past, however, it is now called for outdoor activity accompanied by the society growth and even expands towards that people get into action and experience by their own free will. With this point of view, the aquatic leisure run become a safe activity. But with a rapid growth of aquatic leisure activity, safety concerns become a serious problem. To prevent safety accident, training should be given, safety inspection and registration should be requested, and strong support of system is needed so users can have an insurance for safety accident. These complements are necessary for overall nourishment and management measure to charge in systematical safety for the users.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2011

This paper investigates the accuracy of the vehicle pre-braking speed estimated based upon measured skidding distance. Driver ordinarily takes sudden braking when urgent situation is developed in the front or when the driver is involved in an unexpected situation, and the driver may be inflicted upon an accident depending on the required stopping distance. Among factors influencing the stopping distance of vehicle such as recognition response time of driver, performance of vehicle's braking device, and state of road surface etc, pre-braking speed is seemingly the most important influencing factor. Currently, in the investigating section of traffic accidents, the state of overspeed is determined by the pre-skidding speed calculated based on the length of skid mark. In order to identify the accurate cause of the accident, it is strongly recommended that estimation of pre-braking speed should be estimated taking into account speed reduction during transient time. In this study, we propose a method for estimating more accurate exact speed information of vehicle at the time of traffic accident. The outcomes from this study potentially help better understanding of the characteristics of vehicle for traffic safety in the future.

• Journal of Korea Game Society
• /
• v.10 no.4
• /
• pp.15-22
• /
• 2010

The purpose of this research is to analyze players' emotion pattern for conducting a quest in Role Playing Game(RPG). We have rebuilt up the action and content of gameplay related to category to set up five action classes of game players based on the literature review about the human behavior classification. Moreover, Mabinogi game includes the composition of various quests by story-centered expanse. We classified the quest structure of the tutorial mode, initial state, of its game into the cognitive action. We build the model of the correlation between cognitive behavior patterns of gameplay and emotions derived from targeting ten novices. The result of this research reveals that gameplayers' stimulus levels are identified to emotion pattern. It is enable to grope to concrete the design of the quest and the level in a specified state. Moreover, players' emotion variation is indicated to the type of expression of fun elements. We expect to use a device to induce the curiousness and the challenge for conducting the higher goal of game in the whole.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.65-73
• /
• 1997

The floating body discussed in this study is a 2-D rectangular floating unit supported by four vertical piles at its corners. Structures of this type are frequently seen as floating piers for the crafts in a small harbour. The movement in some modes of motion of such a flating body is fully or partially restrincted by the piles. The authors(Kim et al. 1994) carried out a series of model tests on its wave control function, its motion and the loads on piles. The experimental results showed that a certain degree of intial constriction force which clamps the floating unit in the horizontal direction can effectively reduce the body motion and wave energy without increasing mooring forces. This may be due to the friction forces occuring between the piles and the rollers installed in the mooring equipments on the floating unit. In this paper, we develop a numerical model for the prediction of wave transformation and floating body motions, where the friction force is idealized as the Coulomb friction and linearized into a damping force using the equivalent damping cofficient. This linearization is verified by comparing the results of motions between the linear and nonlinear analysis of the ezuations of motion. We further compare the caculation results by the linear model with the experimental results and discuss the effect of the friction force or the constriction force on body motions and wave energy dissipation.

• Archives of design research
• /
• v.14 no.2
• /
• pp.217-224
• /
• 2001

Graphic thinking for the idea sketches brings about variations between abstract realm and concrete one, and between conceptual realm and perceptual one. When design information is projected to the thinking process, some images are generated, and transformed. We reviewed the sketching devices for computerization to deal with a lot of design data in the computing environment. The LCD Tablet can be a substitute for the Pen & Paper to get rid of irksome tasks at handling the design data. Using a protocol analysis technique, we examined the influences of different design information, which is consisted of verbal concepts and/or visual images, and abstract information and/or concrete one. The findings show that there are no significant differences of influences between verbal/visual information and abstract concrete information at the conceptual design. These facts support that graphic thinking process is progressed with the perceptual and mental image.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.183-191
• /
• 2006

The accuracy of the upward continuation is assessed through the gravity modeling using an ultra-high degree spherical harmonic expansion. The difficulties in the numerical calculation of Legendre function with ultra-high degree, underflow and/or overflow, is successfully resolved in 128 bit calculation scheme. Using the generated Legendre function, the gravity anomaly with spatial resolution of $1'{\times}1'$ on the geoid is calculated. The generated gravity anomaly is degraded and extracted with various noise levels and data intervals, then upward continuation is applied to each data sets. The comparison between the upward continued gravity disturbances and the directly calculated from the spherical harmonics showed that the accuracy on the direct method was significantly better than that of Poisson method. In addition, it is verified that the denser and less noised gravity data on the geoid generates better gravity disturbance vectors at an altitude. Especially, it is found that the gravity noise level less than 5mGal, and the data interval less than 2arcmin is necessary for next generation precision INS navigation which requires the accuracy of 5mGal or better at an altitude.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.232-237
• /
• 2019

It has recently been combined with advanced technologies such as AR and VR, and its application range is expanding to various forms of smart signage. However, until now, digital signage service that reaches us is installed in many floating populations such as bus stops, elevators, and banks and is used in the form of providing news, weather, and advertisements. In addition, large companies, government offices, and outdoor advertising companies occupy the market. The use of such services in small and medium-sized businesses and small retail stores is costly and expensive to manage. Also, it is difficult to generalize the market because services and solutions are being deployed in the market in the form of top-down. Therefore, in this paper, we proposed a digital signage system for transmitting a remote video advertisement that uses a show window in front of the store as a beam project screen for small retail stores, and can remotely set and manage and update it in OSGi service platform.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.35-43
• /
• 2022

The 2020 Gwangju Media Art Festival (2020 GMAF) was held in the area of the National Asian Cultural Center. Under the slogan "The entire Gwangju shines under the theme of "Aesthetics of Light and Coexistence," the media festival demonstrated projection mapping to Jeonnam (former) Provincial Office at the DATA+ Research Institute of Chung-Ang University's Graduate School of Advanced Video. This paper focuses on explaining the overall production process and content development of projection mapping demonstrated in the Jeollanam-do Provincial Government, which is a symbol of Korean democratization and is located in the center of Gwangju, Jeolla-do. It was intended to faithfully express the history of the 2020 GMAF and Jeonnam (former) provincial government, Gwangju's history, and democratization records. It was intended to show images, background sounds, sound effects, and visual effects using various special effects and high-power laser devices using unique characteristics of projection mapping. To this end, about 5 minutes and 30 seconds of content were planned, and it was divided into parts and topics, and one individual story was developed for each chapter.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.362-371
• /
• 1995

This study describes with the sinking behaviour for the purse seine. The experiment was carried out using three model purse seines of knotless netting. The nettings were woven in same leg length(10.5mm) of polypropylene 170 denier, polyamide 210 denier and polyester 250 denier two thread ply twine, each of the seines were named PP seine, PA seine and PES seine. Dimension of Purse seine models were 420cm for corkline and 85cm for seine depth, each models rigged 65.8g, 50.6g and 35.8g(weight in water) of lead for a leadline, seine models will have the same weight in water. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. The results obtained were as follows: 1) Netting bundle for PP seine was existence on the surface of the water, spread out a netting by sinking force of sinkers. 2) Netting bundle for PES seine was existence in the middle of corkline and leadline. 3) Average sinking speed of seine margin was fastest for 10.7cm/s of PP seine, followed by 9.7cm/s of PA and 9.2cm/s of PES seines. 4) In all seines, the force of horizontal movement for the seine setting was values of ranged in disregard.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.64-72
• /
• 2008

Recently security is being an important issue in almost every field of industry. This situation has affected port logistics industry deeply. Ports are now leaving operational methods that only focus on productivity, and shifting to new ones which focus on safety and customer services on the basis of it. Thus a lot of companies and institutions have offered various solutions as this issue becomes more and more intense. Among them, most typical solutions involve installing special devices to ordinary containers to improve its security, such as CSD (Container Security Device) of GE (General Electric) and eSeal of Savi Networks. On the other hand, these devices focus only on international standards or technical implementation, and this causes inconvenience to actual users like cargo owners, sea carriers, or stevedoring companies. This is considered to be due to lack of sufficient consideration on user demands. This research uses QFD (Quality Function Deployment) method for deducting system requirements in order to solve the problems of previous security devices and to develop a security system that can not only reflect the demands of the users but also considers real-world conditions. According to the QFD results, a total of 21 system CTO's were deducted under 5 categories.