• Journal of Intelligence and Information Systems
• /
• v.14 no.4
• /
• pp.31-46
• /
• 2008

A stacking yard of a container terminal is a space for temporarily storing the containers that are carried in or imported until they are carried out or exported. If the containers are stacked in an inappropriate way, the efficiency of operation at the time of loading decreases significantly due to the rehandlings. The remarshaling is the task of rearranging containers during the idle time of transfer crane for the effective loading operations. This paper proposes a method of planning for remarshaling in a yard block of an automated container terminal. Our method conducts a search in two stages. In the first stage, the target stacking configuration is determined in such a way that the throughput of loading is maximized. In the second stage, the crane schedule is determined so that the remarshaling task can be completed as fast as possible in moving the containers from the source configuration to the target configuration. Simulation experiments have been conducted to compare the efficiency of loading operations before and after remarshaling. The results show that our remarshaling plan is really effective in increasing the efficiency of loading operation.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.147-156
• /
• 1999

Skeletal Cl III malocclusion is an orthopedic appliance mainly used for growing children with maxillary undergrowth, which largely entails skeletal Cl III malocclusion. It improves anterior crossbite and maxillary position and thus, enables patients to attain favorable Profile but often involves unfavorable profile with protrusive upper and lower lips. Therefore, if orthodontists have knowledge of which condition helps obtain favorable occlusion and profile, they are able to predict the prognosis and limitation of the treatment. This study was done in order to help obtain favorable Profile after treating growing skeletal Cl III children. In the study, we classified childern into two groups, the one with favorable profile(Group 1, n=12) and the other with unfavorable profile(Group 2, n=14) and, with retrospective study using pre- and post-treatment lateral cephalogram, drew the following conclusions. 1. As patients had more serious labioversion of upper incisors, they were more unlikely to have favorable profiles after the treatment. Protrusion of prosthion, which was related with maxillary incisors, also affected profiles. 2. As the NL-ML angle before the treatment was small, it was more likely to get favorable profile. 3. As the degree of lower lip protrusion was high, it was likely to have bialveolar protrusion after the treatment. 4. As the degree of downward and backward rotation of mandible was high, it was likely to get unfavorable profile.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.5
• /
• pp.62-70
• /
• 2009

A field soil highly contaminated with petroleum hydrocarbons (JP-8 and diesel fuels) was employed for its remediation by a lab-scale thermal desorption process. The soil was collected in the vicinity of an underground storage tank in a closed military base and its contamination level was as high as 4,476 ppm as total petroleum hydrocarbon (TPH). A lab scale directly-heated low temperature thermal desorption (LTTD) system of 10-L capacity was developed and operated for the thermal treatment of TPH contaminated soils in this study. The desired operation temperature was found to be approximately $200-300^{\circ}C$ from the thermal gravimetric analysis of the contaminated field soils. The removal efficiencies higher than 90% were achieved by the LTTD treatment at $200^{\circ}C$ for 10 min as well as at $300^{\circ}C$ for 5 min. As the water content in the soils increased and therefore they were likely to be present as lumps, the removal efficiency noticeably decreased, indicating that a pre-treatment such as field drying should be required. The analysis of physical and chemical properties of soils before and after the LTTD treatment demonstrated that no significant changes occurred during the thermal treatment, supporting no needs for additional post-treatments for the soils treated by LTTD. The results presented in this study are expected to provide useful information for the field application and verification of LTTD for the highly contaminated geo-environment.

• Journal of agriculture & life science
• /
• v.51 no.1
• /
• pp.205-212
• /
• 2017

This study aimed to output augmented reality display using chroma-key so that power tiller simulator can be operated smoothly while wearing the head mounted display. In this paper, we propose a chroma-eliminating image filtering method. Experimental results show that the maximum and minimum values of hue, saturation and intensity were 0.52, 0.153, 0.57, 0.16, 1, and 0.12, respectively. A keypad was used to set the initial position of augmented reality adjusted with the front, back, top, bottom, left, and right buttons. The initial position value is always maintained and managed according to the trailer attachment and detachment. Finally, we show that the augmented reality merged with virtual image and the acquired image of operation device using coordinate values obtained from the HMD and the position tracking sensor as relative coordinates in Unity program that is the ultimate game development platform.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.8
• /
• pp.755-760
• /
• 2010

In this study, we mainly focused on the PM (Particulate Matter) emission characteristics of a diesel engine. To analyze particle behavior in the tail-pipe, particle emission was measured on the engine-out (downstream of turbocharger), each upstream and downstream both of DOC (Diesel Oxidation Catalyst) and DPF (Diesel Particulate Filter). Moreover, particle emission contours on each sampling point were constructed. The reduction efficiency of particle number concentration and mass through the DOC and DPF was studied. Parameters such as EGR (Exhaust Gas Recirculation) and the main injection timing were varied in part load conditions and evaluated using the engine-out emissions. The DMS500 (Differential Mobility Spectrometer) was used as a particle measurement instrument that can measure particle concentrations from 5 nm to 1000 nm. Nano-particles of sizes less than 30 nm were reduced by oxidation or coagulated with solid particles in the tail-pipe and DOC. The DPF has a very high filtration efficiency over all operating conditions except during natural regeneration of DPF.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.629-638
• /
• 2016

In this study, the effect of inorganic constituents on the physicochemical properties of pyrolytic products produced from empty fruit bunch (EFB) by fast pyrolysis were investigated. Inorganic constituents were removed from the EFB by means of washing treatment with hydrofluoric acid (HF) and distilled water (D.I water). Ash content decreased from 6.2 wt% (EFB) to 2.4 wt% (HF-EFB) and 3.5 wt% (D.I-EFB), respectively. As a result of the inorganic component, a quantity of potassium in EFB has showed the highest removal efficiency in both HF and D.I water (HF: 80.3%, D.I water: 72.8%). Fast pyrolysis was performed with demineralized EFB in the fluidized bed reactor under the temperature of $500^{\circ}C$ at the residence time of 1.3 sec. The yield of bio-oil was determined to 57.3 wt% for HF-EFB and 52.1 wt% for D.I-EFB, respectively. Biochar yield decreased whereas yield of non-condensable gas increased with decreasing inorganic content of EFB. Water content decreased from 26.9% (EFB) to 9.9% (HF-EFB) and viscosity increased from 16.1 cSt (EFB) to 334 cSt (HF-EFB).

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.289-296
• /
• 2001

The effects of HRT and effluent time on removals of pollutants in the electrochemical pilot were investigated. COD removal after 8 hour electrochemical reaction time in HRT 30 and 60 minutes were higher than that of 15 minute HRT. Turbidity removal was 90% or greater regardless of conditions during effluent time. Removals of T-N and T-P during effluent time in HRT 30 and 60 minutes were $71{\sim}74%$ and $85{\sim}98%$, respectively. To evaluate the combination of activated sludge process and continuous electrochemical as pretreatment, the removal efficiencies of pollutants was investigated. In two treatment processes of a single activated sludge system and a electrolysis pilot plus activated sludge systems, SVI and MLSS during effluent time were kept with $82{\sim}112$ and $1,230{\sim}1,750$ mg/L, respectively. COD removal was approximately 90% at early effluent time for both treatment systems, but COD removal in a single activated sludge was slightly decreased as effluent time went by, compared with the single activated sludge COD removal was slightly increased in the early stage of the electrolysis plus activated sludge system. Turbidity removal during effluent time was higher than 95% for both treatment systems. T-N removals during effluent time in a single activated sludge system and a electrolysis pilot plus activated sludge systems were $62{\sim}74%$ and $72{\sim}86%$, respectively. T-P removal in a electrolysis pilot plus activated sludge systems was increased by 9% at early effluent time and 15% after 72 hours of effluent time in compared with a single activated sludge system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2056-2060
• /
• 2008

도시하천의 오염원은 점오염원과 비점오염원으로 분류되어 점오염원은 하천유입 전에 차집하여 하수처리장에서 처리하는 체계가 갖추어져 있으나 전체 오염부하량의 $30%{\sim}40%$ (BOD기준)로 추정되는 비점오염원은 차집되거나 처리되지 않고 그대로 하천에 유입되고 있는 실정이다. 비점오염원은 불특정 오염원으로서 지표의 오염물질이나 합류식 하수관거의 하수가 강우에 의해 발생한 유출과 함께 하천으로 유입(CSOs)되어 우천 시에 하천을 오염시키는 가장 큰 원인이 되고 있으므로 이의 저감하기 위한 효과적인 비점오염원 관리방안이 요구된다. 본 연구에서는 대상유역인 부산광역시에 위치한 온천천 유역을 주요토구별 43개 유역으로 구분하여 SWMM(Storm Water Management Model)을 구축하였고 개별 토구에 Divider를 설치하여 일정 차집량을 초과하는 유량은 처리장으로 유입되는 것으로 모의하였다. 장치형 처리시설은 농도에 따라 일정효율을 가지고 처리시설의 임계유량을 초과하는 경우는 미처리되어 방류되는 것으로 가정하였으며 처리장으로 차집된 유량도 처리장의 시간최대 유량을 초과하는 유량은 간이처리 후 방류되는 것으로 가정하여 시나리오에 따라 모의하였다. 각 토구별로 처리시설을 설치한 경우의 처리효율과 차집비율을 증가시켜 처리장에서 일괄처리하는 경우의 처리효율을 차집비율별로 검토하여 최적의 차집비율을 검토하였다. 또한 오염원 관리측면의 면적당 축적부하량 저감과 발생량 관리측면의 토구의 차집비율 증가 및 토구에 대한 처리시설 설치비율에 따른 효율을 검토하여 처리효율, 오염원 저감 및 차집비율에 대한 상관관계를 도출하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.92-92
• /
• 2016

전기방전의 기본적인 특성을 가지고 있는 플라즈마를 이용하여 재료를 가공하는 증착, 식각, 표면처리 공정에 있어서 플라즈마 내의 전자 충돌 반응에 의한 이온, 라디칼의 생성과 재료 표면의 반응을 분석하는 도구로써 분압 측정은 일반적인 화학 조성 분석에 기원한 오랜 역사를 가지고 있다. 1 amu 정도의 분해능을 가지고 있고 크기가 30 cm 정도에 불과한 사중극자 질량 분석기는 적절한 질량 스캔 시간과 넓은 이온 전류 측정 범위를 가지므로 소형 차등 배기 시스템과 조합하면 1 mTorr 영역의 스퍼터링 시스템에서 1 Torr 영역의 PECVD/PEALD 시스템 진단에도 쉽게 적용이 가능하다. Inficon사의 CPM-300과 Pfeiffer사의 Prisma80을 이용한 플라즈마 식각 공정 분석 결과를 보면 동위원소까지 분석이 가능하다. 또한 전자충돌 이온화 에너지를 조절하여 m/q(질량전하비율)가 중첩되는 경우의 해석도 가능하다. 다중 오리피스를 갖는 compact design의 밸브 블록을 이용한 설계에서는 line-of-sight 입사가 불가능하여 이온 전류를 분석할 수 없다는 단점이 있으나 표준 가스를 이용한 정량화 등의 큰 장점들이 있다. 최근 이루어진 연구의 내용으로는 유도 결합 플라즈마 장치에서 전도성 메쉬를 이용한 라디칼 거동 관찰을 위해서 두 대의 CPM-300을 메쉬 전 후에 설치하여 라디칼의 양 변화를 전류 프로브와 같이 사용하여 조사하였다.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.191-202
• /
• 1998

The emission standards for diesel particulates have been continued to become tighter. This article reviews the pore and how to filtering characteristics and how to design the ceramic honeycomb filter which is generally used for diesel particulate filter. And the properties and fabrication methods of other particulate filters, i.e. ceramic fiber candle filter, ceramic foam filter, ceramic cross-flow filter and metal filter, are presented in this review. The results show that though the various filters have been developed and tested in the field, the more efforts are needed for the commercilaization of the diesel particulate filter.