• Korean Journal of Ecology and Environment
• /
• v.34 no.3 s.95
• /
• pp.141-152
• /
• 2001

Abundance of autotrophic picoplankton (APP) and their contribution to phytoplankton biomass were assessed in seven brackish lagoons and five freshwater reservoirs in the summer season. Phycocyanin-rich picocyanobacteria dominated APP in lagoons, while phycoerythrin-rich picocyanobacteria dominated APP in freshwater reservoirs. The cell density of APP ranged from $3.6{\times}10^3$ to $5.0{\times}10^6\;cells/ml$ (median $2.5{\times}10^5$) in brackish lagoons and from $3.8{\times}10^4$ to $3.6{\times}10^5\;cells/ml$ (mdian $1.3{\times}10^5$) in reservoirs. Carbon biomass ranged from 1.0 to $1,385.0\;{\mu}gC/L$ in lagoons and from 15.3 to $128.2\;{\mu}gC/L$ in reservoirs. APP cell density in Lake Kyungpo was over $10^6\;cells/ml$in all three surveys, which is one of the highest values recorded in all over the world. During the thermal stratification in Lake Soyang, the maximum abundance of APP and their maximum contribution to phytoplankton biomass were observed near the thermocline. This study showed that APP sometimes can contribute significantly to phytoplankton biomass both in lagoons and reservoirs with the range from 0.1 to 85.0%. APP which have been overlooked in the past studies appears to be important primary producers in Korean lake ecosystem.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.260-264
• /
• 1983

Organic matters as COD, ignition loss, phaeophytin pigment, and sulfide in the superficial bottom mud in the shellfish farms during summer in 1981 were determined to find an eutrophication level for the conservation of the farms. Both the Goseong Bay and the Jaran Bay, which are productive shellfish farms, are located along the southern coast of the Korean Peninsula. The Goseong Bay is 8m deep with a narrow mouth and approximately $17.5km^2$ in area, and the Jaran Bay 10m deep with $27.3km^2$. The bottoms are silty. Major shellfishes cultured are the oyster by the off-bottom method and the arkshell in the bottom. COD contents were $12.5{\sim}19.5\;mg/g$ dry mud, ignition loss $6.70{\sim}11.83\%$, phaeophytin pigment $6.8{\sim}11.0{\mu}g/g$ dry mud, and sulfide $0.18{\sim}0.64{\mu}g/g$ dry mud. There were no significant differences in the determined quantities between two bays. All quantities except the sulfide which is a little over than an eutrophication level, 0.3 mg/g dry mud, shows that the bottom muds are in an early stage of eutrophication. In addition, there was no particular increase in quantities of aforementioned four paramenters in comparision with those of 1976. It means that the eutrophication in the Goseong-Jaran Bay makes slow progress.

• Korean Journal of Environment and Ecology
• /
• v.22 no.1
• /
• pp.35-42
• /
• 2008

This study was conducted to provide basic information that can be used to restore habitats of Nannophya pygmaea. Nannophya pygmaea is an endangered species of wildlife fauna in Korea and its habitats are distributed very scarcely in Korea. Ten wetland sites throughout Korea, where N. pygmaea inhabited (2 sites in Incheon Muui-do, 1 site in Gokseong Singi-ri, 4 sites in Gokseong Wolbong-ri, and 3 sites in Mungyeong Yulsu-ri) were investigated from June 2006 to August 2007. Investigation was made on landscape properties, habitat sizes, vegetation types, water environments, and water sources. N. pygmaea was generally found in the abandoned paddy fields surrounded by mountains. The habitats ranged from $113.4m^2$ to $1,153.1m^2$ in area, and were mostly dominated by Juncus effusus and Persicaria thunbergii. The water level was $2.6\sim7.3cm$, and the water temperature ranged from $16^{\circ}C$ to $27.8^{\circ}C$. The elevation of the habitats ranged from 139 to 243 m above sea level, which was mostly lower than that of other high mountain wetland habitats. In conclusion, the habitats of N. pygmaea can be restored at wetlands, which have similar condition with field habitat such as abandoned paddy fields in the beginning stage of oligotrophy. Because N. pygmaea is sensitive to microtopography and other surrounding environments, the approach to restore the habitats for N. pygmaea should consider those microhabitat conditions shown in this study.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.63-71
• /
• 2023

Increased nitrogen in the water system has become an important environmental problem around the world, as it causes eutrophication, algae bloom, and red tide, destroys the water system, and undermines water's self-purification. The most common form of nitrogen in the water system is ammonium ion (NH₄⁺), and the largest portion of ammonium ions comes from wastewater. NH₄⁺ is a major contributor to eutrophication, which calls for appropriate treatment and measures for ammonium removal. This study produced biochar by applying Sorghum × drummondii, a type of biomass with a great growth profile, analyzed the adsorption capacity of Sorghum × drummondii biochar produced from the changing carbonization temperature condition of 200 to 400℃ in the ammonium ion range of 10 to 100 ppm, and used the results to evaluate its potential as an adsorbent. Carbonization decomposed the chemical structure of Sorghum × drummondii and increased the content of carbon and fixed carbon in the biochar. The biochar's pH and electrical conductivity showed high adsorption potential for cations due to electrical conductivity as its pH and electrical conductivity increased along with higher carbonization temperature. Based on the results of an adsorption experiment, the biochar showed 54.5% and 17.4% in the maximum and minimum NH₄-N removal efficiency as the concentration of NH₄-N increased, and higher carbonization temperature facilitated the adsorption of pollutants due to the biochar's increased pores and specific surface area and subsequently improved NH₄-N removal efficiency. FT-IR analysis showed that the overall surface functional groups decreased due to high temperature from carbonization.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.174-189
• /
• 2012

The objective of this study was to determine the weight-length relations and condition factor (K) of Zacco platypus, along the trophic gradients from oligotrophic to eutrophic state in six reservoir ecosystems ($B_aR$, $Y_yR$, $J_yR$, $G_pR$, $Y_dR$, and $M_sR$), during 2008~2010. The species was selected as a sentinel species for the study, due to its wide distribution and wide trophic gradient. The analysis of trophic state index (TSI), based on total phosphorus (TP) and chlorophyll-a (Chl-a), indicated that reservoirs of $Y_yR$ and $B_aR$ were classified as to be in an oligotrophic state (30~40), the $J_yR$ and $G_pR$ as mesotrophic (40~50), and the $Y_dR$ and $M_sR$ as eutrophic state (50~70). Total 47 species and 26,226 individuals were sampled from 6 reservoirs and sensitive species dominated in the oligotrophic reservoirs ($Y_yR$ and $B_aR$). In the mean time, the tolerant speciesdominated the community in the mesotrophic ($J_yR$ and $G_pR$) and eutrophic ($Y_dR$ and $M_sR$) reservoirs. Regression analysis of body weight, against the total length, indicated that the regression coefficient (b value) was lower in the oligotrophic reservoir (2.77~2.79) than the mesotrophic (3.07~3.17) and eutrophic reservoirs (3.15~ 3.21). This result suggests that the population growth rate Zacco platypus reflected the trophic gradients of the reservoirs. The analysis of condition factor (K) against the total length showed positive slopes (b>3.0) in mesotrophic and eutrophic reservoirs, and a negative slope (b<3.0) in oligotrophic reservoir. The variation of the regression slope of "b" in Z. platypus was accounted for 79.7% [$b=0.012{\times}TSI(TP)+2.395$, p=0.017] by the variation of TSI (TP) and 82.2% [$b=0.013{\times}TSI(Chl-a)+2.36$, p=0.013] by the variation of TSI (Chl-a). The proportion of DELT abnormality increased as the trophic state increases in the reservoirs. The overall data suggest that the growth of the fish populations, based on the length-weight relations and condition factor, reflected the trophic state of nutrient and phytoplankton biomass of the reservoir waters. Thus, in spite of the tolerant characteristics of Z. platypus, hypertrophic states might negatively affect the health of the population.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.18-43
• /
• 2011

The results of study on planting and cultivate of Hong Man-Seon(1643~1715)'s 'Salimkyungjae(The Economy of Forest)' the first summative textbook of agricultural skill of South Korea, are as follows. First, 'Salimkyungjae' suggests that one can enrich oneself, eat fruits in fall, enjoy the shade of trees in summer, and enjoy flowers in spring if one plants tree with 10 year plan with knowledge of ecology. Second, the number of plants had increased continuously from the early Chosun Dynasty to the mid Chosun Dynasty. The 52 plants in the book are classified into 31 trees, 8 shrubs, 3 others, and 10 herbs, and 28 of them are fruit trees. Hence, we can see that the book is for the promotion of welfare. Third, planting(transplantation) is the best on January of the lunar calendar, and the second on February, and fertile soil should be added much. Trees must be planted as deep as once it was planted, and buttressed. It will sprout well if it is planted at the depth of one inch, and planting a cutting should be carried out at the early March with 5 inch and finger-thick branches. Grafting is the best when it begins to sprout. Fruit trees will bear many fruits if they are grafted at the direction of South, and fruits will be greater if the trees' branches are cutting off on January. Especially, January was selected for the best season of planting traditionally. Fourth, flower trees are planted or sowed with manure around January and February of the lunar calendar, and it is recommended to replant them into flowerpots with manure when having flower buds around March and April of the lunar calendar. It would bloom earlier when using water mixed with stable manure, and sulfur smoke can be used in order to change the flower color from red to white. Flowerpots would be placed at half shaded lot with being supported by bricks. Pomegranate, gardenia, camellia and four-season flower should be planted after flowers fallen. When flower trees are beside walls, they need to be rotated frequently since their branches all point toward house. Seeds need to be preserved in a sunny hut, where its entrance and ventilating openings would be at south because it is convenient to manage pots. Fifth, insects hidden at fruit trees would be destroyed by torch smoke when roosters cry on New year's day of the lunar calendar. Insects would be decoyed into straw hanged at dawn of Cheongmyeongday(淸明日). Insects on fruit trees would be controlled using sulfur powder to close up holes or sulfur smoke to fumigate. Particularly, it suggests that utilization of fertile soil would be the best solution for growing health plants and preventing pest.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.860-865
• /
• 2000

This Paper Proposes the test pieces of X, Y and Z axes to compensate the shape distortion of Selective Laser Sintering(SLS) parts resulting from the phase change during the sintering process. In no case of the proposed compensation test pieces of X, Y axes the accurate rates of shrinkage can be measured with the reduction of curling which is obtained from adjustment of build orientation and the formula used to get scale factors are proposed with the shrinkage rates of them. The scale factors of X, Y and Z axes are generated by building up proposed compensation test pieces. The generated scale iactors are required to satisfy the dimensional accuracy even if there are changes of the build position and the size of SLS parts in the build chamber. For this reason, it is proposed that the build positions and the size be considered to be noise factors against the compensation test pieces and a method is also proposed that scale factors be selected to robustly maintain the dimensional accuracy of SLS parts under the actual operating conditions with the application of the Taguchi Method.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.124-131
• /
• 2000

Rapid Prototyping(RP) models are no longer used only for design verification. Currently, parts built utilizing layer manufacturing technology can be employed as functional prototypes and as patterns or tools for different manufacturing processes such as vacuum casting, investment casting, injection molding, precise casting and sand casting. This trend of Rapid Prototyping application meets the requirement of concurrent engineering and its range covers a more spreaded area. The aim of this paper is saving the manufacturing lead time and cost of plastic parts having hollow space shapes used by prototype-car. Using rapid prototype patterns, made by the Selective Laser Sintering(SLS) technique, a new approach of manufacturing resin-based blow mold is discussed. It has a great potential fur making prototype-car parts with the batch size of under 200 parts, in case of rapid modification due to a subsequent design changes in developing stage. So, the process proposed in this research shows reduction of process time and manufacturing cost when compared with the conventional process such as a Zinc Alloy fur Stamping(ZAS) mold.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.173-180
• /
• 1994

One can see more and more photograrmmetric applications dealing with the extraction of information from images obtained with CCD (Charge Coupled Device) camera scanners. In order for this information to be useful, the scanning errors of scanners must be known through a calibration. Investigation of this study is given to the detailed procedure of the correction for scanning errors created during the scanning of photographs with CCD camera scanner using the three kinds of high resolution reseal plates prepared. The geometric corrected digital images for scanning errors were generated and the accuracy of the resulting new images for each types of plates were checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• 한국해양학회지
• /
• v.24 no.3
• /
• pp.148-156
• /
• 1989

This investigation was performed in eutrophic lake within the framework of a series of studies to evaluate the significance of gram reaction for both bacterioplankton and attached bacteria in the dynamics of organic materials at various aquatic ecosystems. In Lake Kasumigaura as a representative of the highly eutrophic freshwater environments, the gram-stain characteristics of the bacterial community changed with the influx of pulses of phytoplankton, as those in the meso trophic environments. The predominency of the gram-negative forms in the bacterial community was about 57% for bacterioplankton and about 53% for attached bacteria. The statistical analysis of the difference of these two distributions showed that these communites were different. Both gram-negative and gram-positive bacteria attached to particles were shown to effect the formation and degradation of particulate organic matter. Gram-negative bacteria plankton participate exclusively in the dynamics of dissolved organic matter.