• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.212-226
• /
• 2013

In this paper, I tried to analyze objectively the structural relation among market directivity, study directivity, and achievement of organization which are intended to equip competitive power of social welfare organization on the social service market centrally formed by the voucher business. Data collection objectives is consist of 7 metropolitan cities social welfare organizations, performing voucher businesses of the Ministry of Health and Welfare, and data is secured from 203 institutions. Some basic technological statistics and regression analysis employing structural equation was used for analysing data. Analyzed result, the structural relation among market directivity and study directivity and organizational performance is appeared meaningfully according to the fact that goodness of fit coefficients is TLI = .86, CFI = .89, RMSEA = .02. With respect to achievement of organization, market directivity and study directivity are all confirmed as positively influenced. The results of analysis about whether market directivity and study directivity for achievement of organization is direct effect or indirect effect shows that market directivity and study directivity are all influenced both directly to organizational performance, and as parameter. By the results of this research, social welfare organizations performing voucher business are to have practical implication requiring organization learning needed collecting and sharing the relevant information and organizational response toward voucher social service market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.504-510
• /
• 2016

This study presents a model for blended problem-based learning (BPBL) for engineering colleges in Mongolia in order to efficiently train talented Mongolian specialists "With problem-solving skills for the current information technology era. BPBL is learner-centered teaching method that promotes learning. Moreover, current teaching methods in the engineering colleges of Mongolia should change to novel and flexible teaching environments and methods that meet learners' needs. Thus, using BPBL for engineering education development in Mongolia will provide more teaching possibilities, which will assist the professors. Over the past few years, universities in Mongolia have established the Center for Teacher Development, which provides training and gives advice to staff about teaching methods, although the majority of lectures are still fragmentary and anecdotal. Therefore, many professors teach the way they learned, and most teaching methods used up till now have been teacher-centered. However, modern college instructors and modem society demand different engineering teaching methods from teachers who are more familiar with old-fashioned methods. Furthermore, the methods should meet the needs of individuals and groups who prefer to apply technology in the engineering learning process. Using an effective engineering strategy in the development of a new engineering teaching method will lead to its success.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.633-641
• /
• 2018

The risk of disasters, such as floods and drought, has increased. Reliable hydrological data is important for analyzing the water resource and designing hydraulic structure to manage these risks. The Yongdam Guryang river catchment located in the central of Korea is the research catchment of K-water and UNESCO IHP, and the hydrological data, such as rainfall, runoff, evapotranspiration, etc. has been observed at the catchment. The aim of this study was to assess the runoff characteristics of the small mountainous catchment of Korea based on the observed hydrological data, and the Probability Distributed Model was applied as the Rainfall-Runoff Model at the Yongdam Guryang river catchment. The hydrological data was divided into the wet period from June to September and dry period from October to May according to data analysis. The runoff ratio was 0.27~0.41 in the wet period and 0.30~0.45 in the dry period. The calibration result by the Probability Distributed Model showed a difference in the calibrated model parameters according to the periods. In addition, the model simulated the runoff accurately except for the dry period of 2015, and the result revealed the applicability of the PDM. This study showed the runoff characteristics of the small mountainous catchment by dividing the hydrological data into dry and wet periods.

• Journal of Korean Society of Archives and Records Management
• /
• v.6 no.2
• /
• pp.57-85
• /
• 2006

There should be an integration between work management and records management in order to document the work processes thoroughly. It's proper to establish a records classification system to have the work classification and record classification table integrated for that purpose. But the conventional procedures and methodology used for records classification system development lack specific features to be used as voluntary guidelines of a common organization or group and to conduct analysis. Recognizing the problems, this study suggested the specific methods of records classification system development to link work management and records management organically. First, the functional classification was chosen as the principle of classification for records classification system development. Then concrete methods of records classification system development were suggested. Analysis and comparison were made for the DIRKS(Designing and Implementing Recordkeeping Systems), which is the standard records management and work analysis of Australia, and AS 5090. The results were used to suggest specific methods of records classification system development in conjunction with the research into the methodology employed for work analysis in information engineering and business administration to compensate for its weakness. The significance of the study can be found in that it suggested the methods of typical records classification system development in connection with records classification, and that it applied them to the Presidential Committee for the Inspection of Collaborations for Japanese Imperialism and tested them.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.373-386
• /
• 2017

This study simulated water quality item and flow rate of subbasin for Saemangeum watershed using Soil and Water Assessment Tool (SWAT) model and Environmental Fluid Dynamics Code (EFDC) model which simulate hydraulic and water quality in three-dimensions. The simulated values corresponded to observed value well. The result of simulation for floodgate operations at the M3 and M5 points, it exceeds water quality standard and at the M3 and D3 points, change of range for concentration is too wide, and upstream of Saemangeum reservoir is sensitive to inflow flow rate. Compared to the annual average concentration for observed station according to the discharge conditions, improvement of water quality for upstream was apparently compared to the downstream. Range of influence for change of water quality presented that maximum discharge condition, the influence range is 22 km in the direction of the Saemangeum downstream from the Mankyung bridge, and 15 km in the downstream direction of saemangeum in the Dongjin bridge. This study result demonstrated that floodgate operating at upstream has significant influence on water quality management of Saemangeum reservoir and it needs to be considered in plans of water quality management for Floodgate operation on Saemangeum reservoir.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.90-96
• /
• 2014

Purpose: The purpose of this study is to see what impact the heat and press-on-metal technique has on the marginal fit of metal ceramic crown. Materials and methods: Prior to the experiment, 4 metal master models were prepared. Each model has margin of chamfer, margin of heavy chamfer, margin of shoulder with bevel and margin of shoulder (collarless). Additionally, 10 crowns were made for each margin, total of 40 crowns. Marginal discrepancy between the master model and crown was observed at ${\times}100$ microscopic magnification in two states; in coping state and upon completion of making metal ceramic crown. Data analysis was performed using paired t-test along with one-way ANOVA and Duncan multiple comparison test. Results: After analyzing mean and standard deviation of marginal discrepancy, it was confirmed that marginal discrepancies were within the clinical permitted range for all states; in coping state and upon completion of making metal ceramic crown. For the chamfer group, a significant increase in marginal discrepancy upon completion of making metal ceramic crown was observed compared to the heavy chamfer group. Also, a marginal discrepancy of porcelain margin in shoulder group was significantly less than the marginal discrepancy of metal margin in chamfer and shoulder group. Conclusion: From the test result, one can conclude that marginal fit of metal ceramic crown built with heat and press-on-metal technique is not significantly different from marginal fit of metal ceramic crown built with traditional technique. And along with efficiency of this system, heat and press-on-metal technique is considered in clinic.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.17-24
• /
• 1995

This study was carried out to make fundamental data for structural safety test of pipe- houses. Experiment on the stress distribution of pipe- houses was conducted to find suitable structural analysis model by examination of end support conditions of pipe. Besides, the loading test and the pile driving test were done to find pull-out capacity and bearing capacity of pipe on the assumption that pipe is pile foundation. For single span pipe - house, the theoretical results assuming the end support condition of pipe is fixed under ground agreed closely with the experimental results of stress distribution. On the other hand for double span pipe -house, the end support conditions of pipe were fixed support when vertical load is applied, and hinged one when horizontal load is applied. The pull - out capacity and allowable bearing capacity of the pipe portion that was buried in the grounds that were soft soil of paddy field and medium or hard soils of dry field derived from experimental results.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.491-497
• /
• 2006

Orthodontic seamless bands are frequently used in pediatric dentistry. In the process of seating bands with luting cement coated inside, not uniformed coating might bring about various problems such as enamel decalcification and/or gingivitis, and this clinical trial was made to review several band-seating methods to exclude these risks. One kind of band luting cement and one size of seamless bands were used on the resin replicas of an extracted maxillary and mandibular 1st molar with three different seating methods 1. seating the band with the luting cement coated only inside the band, 2. seating the band with the luting cement coated inside the band and on axial surfaces of the teeth, 3. seating the band with the adhesive tape on the occlusal opening of the band and the luting cement coated only inside the band. After cement was completely set, bands were peeled off from the teeth and the status of cement coating was evaluated. With this experiment more uniformed coating of the luting cement was found in latter two groups. These methods are thought more appropriate to almost completely rule out the risk of unevenly coated cement beneath the bands by conventional method.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.127-153
• /
• 2010

This study explores the locomotives of the growth in the Korean online shopping industry upon the theoretical basis based on the last 10 years' rapid changing environment. This attempt reveals the counter-arguments against preemtive effects based on the observation of reintermediation process in the online industry. We reviewed the NEBIC model proposed by Wheeler(2002) and propose the growth model, double helix framework based on the dynamic capability view. Furthermore the relevance of the proposed framework was validated with the review of last 10 years' sales and market share data in the online shopping industry. Meanwhile we found the limits of online market growth with the open market domination. So future of the online shopping retailers is depending on the development of the channel functions and merchandising on the basis of self-capability. Based on the tentative conclusion, we also suggest implications for the policy makers. Firstly policy facilitating the specialization of the power sellers incubased in the open market is necessary for the sustainable online market growth. And the establishment of the control tower is suggested to coordinate the consistency of the policies and regulations. And the device of the incentive is also proposed to strengthen the open markets' function to facilitate the small and medium online merchants.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.1
• /
• pp.67-79
• /
• 2013

For the sake of the Transit-Oriented Development that has been prominent recently, an analysis of the spatial structures of transit centers, above all, should be carried out at a local level. This study, thus, analyzes the spatial structures of subway influence areas by applying a Geographically Weighted Regression (GWR) model to individual parcels. As a result of the validity analysis of the model, it has turned out that the subway influence areas have different characteristics respectively, and there is spatial heterogeneity even in the same single area. Also, the result of the comparison among models has proved that the GWR model is more adequate than the Ordinary Least Square (OLS) model and $R^2$ has been also increased in the GWR model. Then, the results have been mapped by means of the GIS, which have made it possible to understand the spatial structures at a local level. If the Transit-Oriented Development is fulfilled in consideration of the spatial structural characteristics of the subway influence areas drawn respectively from the model analysis, it will be helpful in adopting effective policies.