• Pediatric Infection and Vaccine
• /
• v.23 no.1
• /
• pp.25-30
• /
• 2016

Purpose: We undertook this study to investigate discrepancies in C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) values, and variations following intravenous immunoglobulin (IVIG) therapy in Kawasaki disease (KD). Methods: A total of 123 KD patients were retrospectively enrolled. Patients were treated with IVIG 2 g/kg at 2 to 9 days after disease onset. We obtained white blood cell (WBC) count, percentage of neutrophils (% neutrophils), CRP, ESR, and N-terminal pro-brain natriuretic peptide (NT-proBNP) values before and 48 to 72 hours after IVIG treatment. Discrepancy was defined as $CRP{\geq}10mg/dL$ and ESR <50 mm/hr (Group 1), or CRP <10 mg/dL and $ESR{\geq}50mm/hr$ (Group 2). Results: Thirty-six of 123 subjects (29.2%) had a discrepancy: 25 (20.3%) in Group 1 and 11 (8.9%) in Group 2. In Group 1, 15 patients (60%) had fever for <5 days (early presenter) and 10 (40%) had fever for ${\geq}5days$ (late presenter). There were six early presenters (55%) and five late presenters (45%) in Group 2. Late presenters had higher ESR than early presenters ($34.3{\pm}21.0mm/hr$ vs. $26.3{\pm}19.3mm/hr$, P=0.029). After IVIG treatment, elevated WBC count, % neutrophils, CRP, and NT-proBNP levels normalized. In contrast, ESR increased from $37.4{\pm}21.9mm/hr$ to $48.0{\pm}22.7mm/hr$ (n=36, P=0.051). Conclusions: A discrepancy may be related to the duration of fever. Due to discrepancies in CRP and ESR values in acute KD, both should be measured to assess the degree of inflammatory activity before IVIG treatment. After IVIG treatment, the ESR should not be used as a marker of response to therapy in KD.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.3
• /
• pp.236-245
• /
• 2003

The study was performed for elucidating angiotensin converting enzyme (ACE) inhibitory activity and comparing antioxidative activity of Panax ginseng extracts prepared at different conditions. Total phenolic content, inhibitory activity on ACE and antioxidative effects were tested on 10 ethanolic extracts and correlation coefficient between total phenolic content and physiological activity was calculated. Yield and total phenolic content of 50% ethanolic extract prepared at $85^{\circ}C$ exhibited the highest value as 42.52% and 0.82%, respectively. Among the fractions obtained from 50% ethanolic extract prepared at room temperature, water fraction showed the highest value in yield as 72.08% and ethyl acetate fraction did in total phenolic content as 6.59%. In the test on ACE inhibitory activity, 50% ethanolic extract obtained at room temperature indicated the strongest effect of 93.8% which was higher than 85.2% of commercialized ACE inhibitor and solvent fractions showed potent inhibitory activity in order of hexane fraction, diethyl ether fraction, ethyl acetate fraction, butanol fraction and water fraction at concentration of $4000{\mu}g/ml$. 50% Ethanolic extract prepared at $85^{\circ}C$ had the most potent inhibition effect on human LDL oxidation as 78.2% at $200{\mu}g/ml$ and the other extracts also did above 60%. Diethyl ether fraction and ethyl acetate fraction showed strong inhibition activity $(34.38%{\sim}78.13%)$ on LDL oxidation at concentration of $10{\sim}200\;{\mu}g/ml$. From the statistical analysis via SAS program, correlation coefficient between total phenolic content and ACE inhibitory effect was 0.6353 at P<0.05. Conclusively, this report showed that the most efficient extraction condition for elevating inhibitory activity on ACE and LDL oxidation, phenolic content and yield from Panax ginseng was 50% ethanol extraction at room temperature or high temperature condition. And Panax ginseng would be used for preventing hypertension or atheroscrelosis for man via inhibitory action on ACE and LDL oxidation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.280-286
• /
• 2010

Purpose: This study evaluated the detorque values of screws in a multiple implant-supported superstructure using stone casts made with 2 different impression techniques. Material and methods: A fully edentulous mandibular master model and a metal framework directly connected to four implants (Br${\aa}$nemark $System^{(R)}$; Nobel Biocare AB) with a passive fit to each other were fabricated. Six experimental stone casts (Group 1) were made with 6 non-splinted impressions on a master cast and another 6 experimental casts (Group 2) were made with 6 acrylic resin splinted impressions. The detorque values of screws ($TorqTite^{(R)}$ GoldAdapt Abutment Screw; Nobel Biocare AB) were measured twice after the metal framework was fastened onto each experimental stone cast with 20 Ncm torque. Detorque values were analyzed using the mixed model with the fixed effect of screw and reading and the random effect of model for the repeated measured data at a .05 level of ignificance. Results: The mean detorque values were 7.9 Ncm (Group 1) and 8.1 Ncm (Group 2), and the mean of minimum detorque values were 6.1 Ncm (Group 1) and 6.5 Ncm (Group 2). No statistically significant differences between 2 groups were found and no statistically significant differences among 4 screws were found for detorque values. No statistically significant differences between 2 groups were also found for minimum detorque values. Conclusion: In a multiple external hexagon implant-supported prosthesis, no significant differences between 2 groups were found for detorque values and for minimum detorque values. There seems to be no significant differences in screw joint stability between 2 stone cast groups made with 2 different impression techniques.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.110-118
• /
• 2006

The Namyang Stream in Hwaong polder was planned for several water uses including recreation, where people can contact the water and consume some amount during the recreational activity. A human health risk was assessed from exposure to E. coli in the Namyang Stream, which receives partially treated wastewater from watershed. The QUAL2E model was applied to simulate stream water quality, and this model was calibrated and verified with field monitoring data. The calibration result showed a high correlation coefficient of greater than 0.9. The mean concentration of E. coli in the Namyang Stream from the QUAL2E output was in the range of 5,000 ${\sim}$ 8,000 MPN 100 mL^{-1}$, which exceeded national and international guidelines. The Beta-Poisson was used to estimate the microbial risk of pathogens ingestion and the Monte-Carlo analysis (10,000 trials) was used to estimate the risk characterization of uncertainty. The Microbial risk assessment showed that the risk ranged from 7.9 ${\times}\;10^{-6}\;to\;9.4\;{\times}10^{-6}$. Based on USEPA guidelines, the range of $10^{-6}\;to\;10^{-8}$ was considered reasonable levels of risk for communicable disease transmission from environmental exposure, and the risk above $10^{-4}$ was considered to be in the danger of infection. Therefore, water quality of the Namyang Stream might not be in the danger of infection although it exceeded national and international guidelines. However, it was in the range of communicable disease transmission, and thorough wastewater collection and treatment at the source is recommended to secure safe recreation water quality.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.39-48
• /
• 2007

The stimulus of accommodation A, the stimulus of convergence C and the prism diopter ${\Delta}$ are reviewed and redefined more obviously. How the A and C are managed in the practice are reviewed and summarized. As a result, the common practical process of the binocular vision findings is most suitable in the case of the $l_c=26.67mm$, where the near distance is measured from the test lens to the near target and its value is 40 cm and the average of the P.D equal to 64 mm. The $l_c$ is the distance between the test lens and the center of rotation. Those values were used at calculating the various values in this paper. The error of the stimulus of accommodation values which are evaluated by the practically used formula (5) are calculated. Where the distance between lens and the principle point of eye is 15.07 mm ($=l_H$). The incremental stimulus of convergence values P' caused by the addition prism $P_m$ are evaluated by the recursion computation method. The P' are varied with the $P_m$, the distance $p_c$ between the prism and the center of rotation, the initial convergence value (or inverse target distance) $C_o$ and the refractive index n of the prism material. The recursion computation method and the other formulas are described in detail. In this paper n=1.7 is used. The two factors by which the P' is increased are exist. The one which is major is the property by which the values of convergence whose unit is ${\Delta}$ are not added in the generally way. The other is the that the actual power of the prism is varied with the angle of incidence light. And the P' is decreased remarkably by an increase in the $p_c$ and $C_o$. The $P^{\prime}/P_m$ are calculated and graphed which are varied with the $p_c$ and $C_o$, where the $P_m=20{\Delta}$, P.D=64 mm and n=1.7. The index n dependence of the $P^{\prime}/P_m$ is negligible (refer to fig. 6). The $p_c$ are evaluated at which the P' equal to the $P_m$ for various $P_m$ (refer to table 1). The actual values of the stimulus of convergence and accommodation which are manipulated simply in the practice are calculated. Two graphical forms are suggested. The one is like as the commonly used one. But the stimulus of convergence and of accommodation values in the practice are positioned at the exact positions when the graphic is made (refer to fig. 9). The other is the form that the incremental stimulus of convergence values caused by the addition prisms are represented at actual positions (refer to fig. 11).

• Clinical and Experimental Pediatrics
• /
• v.52 no.8
• /
• pp.869-874
• /
• 2009

Purpose : Short attacks of headache are present in the pediatric age group. Short-lasting headaches (SLH) have been infrequently reported in children and adolescents. This study aims to assess the prevalence, clinical characteristics, treatment, and prognosis of short-lasting headaches in children and adolescents. Methods : One hundred twenty-three consecutive patients attended the Chosun University Hospital Headache Center between March 2006 and July 2007. Among 123 headache patients, 44 patients with one key criterion, namely, recurrent headaches episodes of a few seconds to less than 30 minutes, were selected. Results : Of the 123 headache patients, 44 (35.8%, males 18, females 26) had SLH. The mean age was 9.24 years (range 2.3-14.2). The mean headache frequency was $11.50{\pm}10.30$ per month, mean severity was $4.86{\pm}1.36$ out of 10, and the mean PedMIDAS score was $7.97{\pm}17.51$. SLH was significantly more common in children <6 years old (10/22, 45.5%) than in ${\geq}6$ years old (34/101, 33.7%) (P=0.015). The nature of pain was pressure in 30.2%, stabbing in 27.9%, throbbing in 18.6%, and dull in 11.7%. In 52.4% patients, the pain occurred in the front, one side of the temple in 28.5%, both sides of the temple in 7.1%, and back in 4.8% patients. The duration of attacks was <6 minutes in 38% and ${\geq}6$ minutes in 61.4%. The intensity of the pain was 4-6 out of 10 in 75.0%, in 13.6% 1-3, and in 11.4% 7-10. Treatment was significantly effective in reducing the frequency, duration, and severity of headaches and the PedMIDAS score after 3 months (P<0.05). Conclusion : Short attacks of headache are common (35.8%) in children and adolescents. These are difficult to classify according to International Headache Society criteria. The outcome, after a period of 3 months to 2 years, was favorable in most patients. Further studies are needed to gather more data and to obtain a better description of these forms of headache in the pediatric group.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.70-76
• /
• 2010

To investigate the ground water quality status for paprika hydroponics for export, its pH, EC (electrical conductivity) and inorganic ion concentrations were analyzed in Gangwan-do (27 samples), Gyeonsangnam-do (77 samples) and Jeollanam-do (54 samples) from November 2008 to September 2009. The average values of several components in ground water were as follows; 7.20 (6.57~7.54) in pH, 0.31 (0.05~0.49) $dS{\cdot}m^{-1}$ in EC, 97.81 (35.37~161.11) in $HCO_3$, 5.68 (0.45~15.48) in T-N, 0.67 (0.15~0.70) in P, 2.53 (0.59~6.70) in K, 35.68 (4.15~80.70) in Ca, 7.35 (1.46~14.87) in Mg, 17.89 (3.31~34.82) in Na, 0.01 (0~0.05) in Fe, 0.09 (0~0.51) in Mn, 0.06 (0~0.07) in Zn, and 0.03 (0~0.10) $mg{\cdot}L^{-1}$ in Cu, respectively. The values of pH, EC, $HCO_3$, Ca, Mg and Na in ground water were different depending on areas and farms. Frequency rates were 92.6% of pH 5.0~8.0, 89.3% of EC < 0.5 $dS{\cdot}m^{-1}$, 69.5% of $HCO_3$ < 100, 97.5% of Na < 30, 88.5% of Ca < 40, 97.5% of Mg < 20, 90.1% of Fe < 0.05, 99.6% of Mn < 0.6, and 98.3% of Zn < 0.5 $mg{\cdot}L^{-1}$, respectively, which can be used for nutrient fertilizers in hydroponics. The percentage of suitable water quality was 46.3% as 70 sites among the all analyzed ions. The pH value showed high significance of correlations with EC, Mg, $HCO_3$, Na, and Fe. Also the EC value showed high positive significance with T-N, K, Ca, Mg, $HCO_3$, Na and Mn.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.80-87
• /
• 2009

Phase transformation, superelastic characteristics and variation of surface residual stress were studied for Nitinol shape memory alloy through application of UNSM technology, and life extension methods of stent were also studied by using elastic resilience and corrosion resistance. Nitinol wire of ${\phi}1.778$ mm showed similar surface roughness before and after UNSM treatment, but drawing traces and micro defects were all removed by UNSM treatment. It also changed the surface residual stress from tensile to compressive values, and XRD result showed less intensive austenite peak and clear martensite and additional R-phase peaks after UNSM treatment. Fatigue resistance could be greatly improved through removal of surface defects and rearrangement of surface residual stress from tensile to compressive state, and development of surface modification system to improve not only bio-compatability but also resistance to corrosion and wear will make it possible to develop vascular stent which can be used for circulating system diseases which run first cause of death of recent Koreans.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.108-116
• /
• 2006

Purpose : High-resolution spiral-scan imaging is performed at 3 Tesla MRI system. Since the gradient waveforms for the spiral-scan imaging have lower slopes than those for the Echo Planar Imaging (EPI), they can be implemented with the gradient systems having lower slew rates. The spiral-scan imaging also involves less eddy currents due to the smooth gradient waveforms. The spiral-scan imaging method does not suffer from high specific absorption rate (SAR), which is one of the main obstacles in high field imaging for rf echo-based fast imaging methods such as fast spin echo techniques. Thus, the spiral-scan imaging has a great potential for the high-speed imaging in high magnetic fields. In this paper, we presented various high-resolution images obtained by the spiral-scan methods at 3T MRI system for various applications. Materials and Methods : High-resolution spiral-scan imaging technique is implemented at 3T whole body MRI system. An efficient and fast higher-order shimming technique is developed to reduce the inhomogeneity, and the single-shot and interleaved spiral-scan imaging methods are developed. Spin-echo and gradient-echo based spiral-scan imaging methods are implemented, and image contrast and signal-tonoise ratio are controlled by the echo time, repetition time, and the rf flip angles. Results : Spiral-scan images having various resolutions are obtained at 3T MRI system. Since the absolute magnitude of the inhomogeneity is increasing in higher magnetic fields, higher order shimming to reduce the inhomogeneity becomes more important. A fast shimming technique in which axial, sagittal, and coronal sectional inhomogeneity maps are obtained in one scan is developed, and the shimming method based on the analysis of spherical harmonics of the inhomogeneity map is applied. For phantom and invivo head imaging, image matrix size of about $100{\times}100$ is obtained by a single-shot spiral-scan imaging, and a matrix size of $256{\times}256$ is obtained by the interleaved spiral-scan imaging with the number of interleaves of from 6 to 12. Conclusion : High field imaging becomes increasingly important due to the improved signal-to-noise ratio, larger spectral separation, and the higher BOLD-based contrast. The increasing SAR is, however, a limiting factor in high field imaging. Since the spiral-scan imaging has a very low SAR, and lower hardware requirements for the implementation of the technique compared to EPI, it is suitable for a rapid imaging in high fields. In this paper, the spiral-scan imaging with various resolutions from $100{\times}100$ to $256{\times}256$ by controlling the number of interleaves are developed for the high-speed imaging in high magnetic fields.