• Journal of The Korean Association For Science Education
• /
• v.25 no.7
• /
• pp.736-745
• /
• 2005

The purpose of this paper was to develop and execute self-appraisal test items on secondary science teachers. Test items included 6 sub-fields-subject knowledge, teaching strategies, teaching skills, assessment, laboratory management, and professional development - and 77 items. Using these test items, science teachers were able to evaluate their ability as prescribed by a 5-point Likert scale. Furthermore, teachers were able to comprehend fields showing their highest and lowest scores among the 6 sub-fields. They could then place special attention on the lowest field insuring self-growth as a science teacher. Self-appraisal test items were developed by analyzing related references on teacher evaluation criteria and standards. 220 subjects composed the sample on which these test items were executed. The results of this study were as follows. First, content validity of the test items was 80.8%. The range of sub-field reliabilities was .76 - .86 and the reliability coefficient of the entire test was .95. The range of correlation coefficient between each subfield was .54 - .69 and that of subfields and entire test was .54 - .79. The correlation coefficient between professional development and the whole test was .79, the highest coefficient observed. Second, significant difference was found according to teaching experience. More experienced teachers had higher scores in all 6 sub-fields (p<.05). In addition, a significant difference according to gender was observed in subject knowledge and laboratory management (p<.05); male teachers had higher scores than female teachers. Also, the higher the level of experience, the higher the scores for subject knowledge (p<.05). Lastly, the teacher's major did not result in any significant differences.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.4
• /
• pp.436-445
• /
• 2008

Stroke is a serious disease despite recent improvements in the medical treatments available. Thirty-six stroke patients were interviewed as case and 36 non-stroke patients were interviewed as controls between February 2005 and August 2005 at Daegu S Medical Center. Information regarding the subjects' food habits was collected using the recall method from 5 years before the onset of stroke. Using interview techniques, we investigated how dietary habits and attitude influence nutrient intake. These results were analyzed by the $X^2$, Student's t-test and Chi-square test using the SPSS 12.0 program. This case-control study was performed to demonstrate the relationships among general quality factors (BMI, WHR, and family history of stroke) and lifestyle factors (smoking, exercise and alcohol drinking). The results were as follows. Analysis of the percentage of nutrient intake in terms of meal pattern showed that WHR was significantly higher in the case group than in the control group. Hypertension and diabetes were the most common preceding diseases associated with the risk of stroke. The frequencies of smoking, alcohol consumption (p<0.001) and exercise (p<0.05) were higher in the cases than in the controls. Thus, the findings of this study are consistent with those of previous studies and suggest that people should be advised to control hypertension, smoking, alcohol drinking and obesity in order to prevent the occurrence of stroke as these factors are major risk factors for stroke.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.2
• /
• pp.92-98
• /
• 2004

The adsorption and desorption of Pb, Cd, Co, Zn, Cr, Co, Ni, and Mo on the waste Undaria sp. were studied. Except for Pb. the mono adsorption rate for all heavy metals were lower than that of the heavy metals mixed. However, the adsorption capacity of the heavy metals by 1g of biosorption, in mixed heavy metals increased According to FT-IR analysis of the biosorbent after heavy metal biosorption, the replacement of the functional group by the heavy metals ions could be confirmed and the inverted peaks became larger after heavy metals adsorption. The adsorption equilibrium of heavy metals was reached in about 1 hour. The equilibrium parameters were determined based on Langmuir and Freundlich isotherms. The affinity of metals on the biosorbent decreased in the following order: Pb>Cu>Cr>Cd>Co. The desorption rate decreased in the following sequence: NTA>$H_2SO_4$>HCl>EDTA. The desorption rate of heavy metals by NTA increased with increase in the concentration from 0.1 to 0.3% but the desorption rate became constant beyond 0.3%. Therefore, it represented that desorption rate of heavy metals was suitable under optimized condition ($30^{\circ}C$, pH 2 and 0.3% NTA solution) and was fast with 80% or more the uptake occurring within 10 min of contact time.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.109-115
• /
• 2008

Because demineralized bone particle (DBP) contains various bioactive molecules such as cytokines, it is widely used biomaterials in the field of tissue engineering. In this study, we investigated the effect of 2-dimensional DBP/PLGA hybrid films on adhesion, proliferation and phenotype maintenance of intervertebral disc cells. PLGA films incorporated with different amount (0, 10, 20, 40 and 80 wt%) of DBP were prepared by the solvent evaporation method and characterized by scanning election microscopy (SEM). PLGA film has a flat and smooth surface. According to the increase of content of DBP, the surface of DBP/PLGA film exhibited few agglomerates and increased the roughness of the surface. Annulus fibrosus (AF) and nucleus pulposus (NP) cells were cultured on PLGA and DBP/PLGA film surface, and then examined the cell adhesion and proliferation by the cell count and SEM observation. The result of cell count and SEM observation revealed that 10 and 20% DBP in DBP/PLGA films were superior to adhesion and proliferation of both AF and NP cells. We confirmed that specific gene expression of disc cells on DBP/PLGA film based on the cell count result. Disc cells seeded on 20% DBP/PLGA film expressed the gene of type I and II collagen continuously. Therefore, pertinent content of biomaterials could provide more appropriate condition on adhesion and proliferation of cell. And this results may be used as a basic data for the intervertebral disc regeneration using tissue engineering.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.83-87
• /
• 2011

Purpose: Recently in diagnostics area PET/CT is using a variety of areas including oncology, as well as in cardiology, neurology, etc. While increasing in the importance of PET/CT, there are various researches in the image quality related to reconstruction method. We compared and tested Iterative 2D Reconstruction Method with True X Reconstruction method by Siemens through phantom experiment, so we can see increasing of clinical usefulness of PET/CT. Materials and Methods: We measured contrast ratio and FWHM due to evaluating images on dose and experiment using Biograph 40 True Point PET/CT (Siemens, Germany). Getting a result of contrast ratio and FWHM, we used NEMA IEC PET body phantom (Data Spectrum Corp.) and capillary tube. We used the current TrueX and the previous Iterative 2D algorithm for all images which have 10 minutes long. Also, a clinical suitability of parameter for Iterative 2D and a recommended parameter by Siemens for True X are applied to the experiment. Results: We tested FWHM using capillary tube. As a result, TrueX was less than Iterative 2D. Also, the differences of FWHM get bigger in low dose. On the other hand, we tested contrasts ratio using NEMA IEC PET body phantom. As a result, TrueX was better aspect than Iterative 2D. However, there was no difference in dose. Conclusion: In this experiment, TrueX get higher results of contrast ratio and spatial resolution than Itertive 2D through experiment. Also, in the reconstruction result through TrueX, TrueX had better aspect of resolution than Iterative 2D in low dose. However, contrast ratio had no specific difference. In other words, TrueX reconstruction method in PET/CT had higher clinical value in use because TrueX can reduce exposure of patient and had a better quality of screen.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.26-29
• /
• 2011

Purpose: The general test method of the Korean Pharmacopeia specifies the test method on the clauses of quality control after manufacturing. According to KFDA Guidance for Medicines, standards of residual solvents regulates the maximum permissible dose of acetonitrile as 400 ppm, ethanol as 5,000 ppm, and acetic acid as 5,000 ppm. This study aims at identifying the type of resiual solvents in the final [F-18]FDG vial of an automatic synthesizer and measure its residual quantity. Materials and Methods: The center carried out residual solvents test of [F-18]FDG injection using Agilent Technologies 7890A with a Flame Ionization Detector. The column of Agilent Technologies 7890A used in measuring of residual solvents was CP WAX column ($30m{\times}0.53mm{\times}1.0{\mu}m$) and analysis condition was split mode 1:1 at the initial temperature $70^{\circ}C$ which was increased $20^{\circ}C/minute$ after two minutes and maintained at the final $140^{\circ}C$ for two minutes. The analysis method was as following: Firstly, ethanol-acetonitrile-acetic acid mixture was classified into four types of concentration (250-25-250 ppm, 1,000-100-1,000 ppm, 3,000-300-3,000 ppm, and 6,000-600-6,000 ppm), and $1.0{\mu}L$ of each type of concentration was injected into gas chromatography followed by an analysis of its peak domain. Then, a calibration-curve by the external standard method was drawn based on the analysis result. Results: While ethanol and acetonitrile were detected in TRACERlab MX, FASTlab had additional acetic acid. The residual quantity of the ethanol-acetonitrile-acetic acid mixture evaluated using the calibration-curve was average 72 ppm ethanol, 54 ppm acetonitrile, and 1030 ppm acetic acid for FASTlab, whereas average 439 ppm ethanol and 79 ppm acetonitrile for TRACERlab MX. This indicated that both of them were within the maximum permissible dose. Conclusion: Solvent residues in the [F-18]FDG injection were all within maximum permissible doses and proper to be used to examine a patient. The result indicated that types and quantities of solvent resides of radioactive pharmaceuticals vary depending on the automatic synthesizer.

• Korean journal of applied entomology
• /
• v.52 no.2
• /
• pp.133-140
• /
• 2013

The developmental times of the immature stages of Sogatella furcifera (Horvath) were investigated at ten constant temperatures (12.5, 15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, $35{\pm}1^{\circ}C$), 20~30% RH, and a photoperiod of 14:10 (L:D) h. Eggs were successfully developed on each tested temperature regimes except $12.5^{\circ}C$ and its developmental time was longest at $15^{\circ}C$ (22.5 days) and shortest at $32.5^{\circ}C$ (5.5 days). Nymphs successfully developed to the adult stage from $15^{\circ}C$ to $32.5^{\circ}C$ temperature regimes. Developmental time was longest at $15^{\circ}C$ (51.9 days) and it was decreased with increasing temperature up to $32.5^{\circ}C$ (9.0 days). The relationships between developmental rate and temperature were fitted by a linear model and seven nonlinear models (Analytis, Briere 1, 2, Lactin 2, Logan 6, Performance and modified Sharpe & DeMichele). The lower threshold temperature of egg and total nymphal stage was $10.2^{\circ}C$ and $12.3^{\circ}C$ respectively. The thermal constant required to complete egg and nymphal stage were 122.0 and 156.3 DD, respectively. The Briere 1 model was best fitted ($r^2$= 0.88~0.99) for all developmental stages, among seven nonlinear models. The distribution of completion of each development stage was well described by three non-linear models (2-parameter, 3-parameter Weibull and Logistic) ($r^2$= 0.91~0.96) except second and fifth instar.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.521-525
• /
• 2001

This study investigated the effects of conventional predrying and modified atmosphere (MA) on the head quality and storability of Chinese cabbage 'Norang' cultivar. Immediately after harvest, heads were predried for 2 days and MA stored in $50{\mu}m$ PE film packages at $4^{\circ}C$. MA packaging restrained Hunter L and b values of Chinese cabbage more effectively than non-packaging during storage at $4^{\circ}C$. But there was little change between the two treatments. Fresh weight decreased less in heads treated with predrying and MA than non-treatment during storage. Predried Chinese cabbage heads kept a high level of soluble solids in 4 weeks of storage, while non-packaging maintained high contents of soluble solids for 6 weeks of storage period. Chinese cabbage heads contained 7.0 mg/gFW glucose, 6.3 mg/gFW fructose, and 0.6 mg/gFW sucrose as major soluble sugars at harvest. The content of sugars decreased immediately after predrying and increased steadily after 2 weeks storage. It was found inappropriate to assess head quality of Chinese cabbage by investigating was investigated by Hunter a, firmness, dry matters content, pH, and soluble sugars after predrying and MA package. Marketability of Chinese cabbage was lost when heads were stored at room temperature in 2 weeks. It showed poor appearance of heads stored at $4^{\circ}C$ in 7 weeks. Decay occurred in Chinese cabbage stored in MA under excessive relative humidity. Predried head showed good appearance during storage at $4^{\circ}C$ for 7 weeks. As a result, Chinese cabbage heads can be successfully stored for at least 7 weeks with predrying and MA storage.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.2
• /
• pp.163-169
• /
• 2014

Purpose: This study is for compared the change of corneal refractive power before and after wearing of rigid gas permeable contact lense with diagnostic method which is 1 D flatter than alignment fitting on right eye and alignment fitting on left eye for 2 months and investigate the preference. Methods: Twenty middle school and high school students (40 eyes) who had never worn a contact lense before for no corneal topographical change, no ocular disease, no experience of ophthalmic surgery and have normal tear amount were selected for this study and corneal refractive power were examined before wearing rigid gas permeable contact lense and adaptation status and corneal examination were performed after 10 days of wearing and after cheking up the continuation of wearing, all candidate wear contact lens 8 hours per day for 2 month and corneal refractive power were compared. Results: After 2 months of wearing with 1 D flatter than the alignment fitting on right eyes, there was significant difference in the central corneal refractive power was $43.84{\pm}1.33D$, flat K power was $43.05{\pm}1.29D$, and steep K power was $44.61{\pm}1.42D$ decreased than before wearing (p<0.001, 0.001, 0.047). The e-value of the principal meridians also shows statistically significant difference (p=0.037, 0.015). After 2 months of wearing with alignment fitting on left eyes, the central corneal refractive power was $44.40{\pm}1.26D$, flat K power was $43.57{\pm}1.23D$. and flat K e-value was $0.58{\pm}0.05$ which showed no statistically significant difference (p = 0.769, 0.614, 0.181). But steep K power was $45.25{\pm}1.36$, and steep K e-value was $0.45{\pm}0.18$ which shows statistically significant difference (p=0.018, 0.027). Conclusions: Consider the comfort, clear vision, dryness for preference fitting investment, 6 students (30%) prefer right eye which is 1 D flatter fitting, 14 students (70%) prefer left eye which is alignment fitting. For rigid gas permeable fitting needed for accurate examination and should prescribe the alignment fitting which is suitable for each cornea.

• Journal of Korean Society of Forest Science
• /
• v.86 no.2
• /
• pp.135-145
• /
• 1997

This study aimed at evaluating one curvilinear equation and nine non-linear equations for estimating stand growth characteristics(mean dbh, mean height and volume per ha) for the plantations of Pinus koraiensis and the natural stands of Quercus mongolica. The data were collected from 92 plots in Pines koraiensis stands and 83 plots in Quercus mongolica stands, and the site index of all the stands is 14. The curvilinear equation, $Y=at^be^{-c/t}$, used in preparing the yield tables was well fitted within the range of data, but was likely to give overestimates when extrapolating in old stage due to the tendency of linear increase. Among the non-linear equations, logistic equation and Sloboda equation gave overestimates in young stands and reached the asymptotic status early which means underestimates in old stage. Extrapolating in old stage, Hossfeld equation generally gave larger values than others due to its large estimates of parameter a, the maximum value. On the other hand, Bertalanffy equation gave underestimates in young and old stands and overestimates in middle-aged stands. The estimates with Korf equation was relatively low for Pinus koraiensis stands, and this tendency was more obvious in dbh growth of Quercus mongolica stands. Ueno-Ohzaki equation was liable to give over or underestimates depending on the value of parameter b when extrapolating in old stands. Considering the accuracy of estimates and the biological base of the growth equations, Gompertz equation, Chapman-Richards equation and Weibull equation were generally applicable for estimating the stand growth characteristics of both species in the whole range of stand ages including extrapolated range. To get more accurate and precise parameter estimates, more data, especially in old stands, should be required in further study.