• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.345-352
• /
• 2011

Soil fertility different depend on application rate of manure and compost for many years. While each crop has different adaptability depend on soil fertility, crop and species or varieties should be chosen depending on the adaptability and productivity. These experiments were carried out to compare the five winter cereal crops for whole crop silage on growth, yield and feed value as affected by soil organic content. The rate of increase on no. of spikes at high fertile soil compared with medium fertile soil was sequently high Samhan (Oat's variety) > Cheongwoo (Wheat) > Gogu (Rye) > Youngyang (Barley) > Shinyoung (Triticale). The rate of decrease at low fertile soil compared with medium fertile soil was sequently high Youngyang > Gogu > Cheongwoo > Shinyoung > Samhan. The triticale was lower variation of no. of spikes as affected by soil organic content than that of other winter cereals. The variations of dry matter yield as affected by soil fertility was higher oat and barley and lower triticale. Forage yield of triticale was higher about 69 percent than that of barley at low fertile soil. Forage yield was the highest in triticale and the lowest in rye in all soil fertility. In high fertile soil, rate of increasing digestible dry matter (DDM) yield compared with medium fertile was high in Samhan and Youngyang. Rate of reduced DDM yield in low fertile soil compared with medium fertile was low in Shinyoung and Cheongwoo.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1378-1383
• /
• 2012

To address the limitations of manufacturing noodle products using rice, brown rice noodles were created by the fermentation of brown rice containing several nutrients and the quality of these noodles were evaluated. White rice noodles, fermented white rice noodles, brown rice noodles, and fermented brown rice noodles were developed using white rice and brown rice, respectively. We found that the content of crude proteins present in the noodles during the fermentation process increased and the content of crude fat and carbohydrates in the noodles was reduced. In addition, the water content of brown rice noodles was twofold higher than that of white rice, although under fermentation conditions, the water content of brown rice noodles decreased slightly. A slight change of chromaticity was observed during the fermentation process. In cooking, the weight and volume of the noodles increased, with the change being lowest in noodles based on white rice. White rice-based noodles exhibited significantly higher turbidity in the cooked noodle soup, while other noodle products showed relatively constant turbidity. Most of the products showed a decreased texture, becoming soft with cooking; however, the elasticity of the cooked products increased. Our results suggest that the disadvantages of producing rice noodles can be overcome by the development of fermented brown rice noodles containing a variety of nutritional components. This would potentially develop a market for rice-based manufactured foods that appeal to modern preferences.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.4
• /
• pp.159-173
• /
• 2009

The purpose of this study was to develop a teaching learning process plan applying Keller's motive induction strategy to 'Nutrition and Meal' unit of the middle school home economics(HE). Five different problems were developed based on the 7th revised HE curriculum: "What should I do for a physical and mental health?", "What should I do to intake a required nutrient of my body?", "What should I do to take a well balanced diet?", "What should I do to build a desirable eating habits?" and "What should I do to deal with a nutrition issues?". This study was performed as the following procedures: the 'Nutrition and Meal' unit of the revised 7th middle school HE curriculum and the present HE textbooks were analyzed. And then the teaching learning process plan was designed, developed, evaluated, and revised. The motive induction strategies were developed based on the Keller's Motivational Tactics Checklist.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.4
• /
• pp.35-54
• /
• 2009

The purpose of this study is to develop practical problem based lesson plans on youth's self management and to analyze it's effect self-leadership skill of middle school students. The contents of the middle school Home Economics Technology textbooks and new curriculum revised in 2007 were analyzed. Based on these analyses 6 practical problem based lesson plans on youth's self management were developed. The topics in the lesson plan were as follows: 'Improving Self Identity', 'Expressing Self', 'getting the Life Goals', 'Importance of Time Management', and 'Time Management Skills'. The second grade middle school students in Goyang City as an experimental group were taught by practical problem based lesson plans. After the experiment, the changes in self-leadership skills of students were analyzed using paired t-test. The significant improvements of self leadership skills such as communication skills, learning skills and group management skills were found in the experimental groups of students. Thus, the following conclusion is made that the practical problem based lesson could be one of the useful methods for students to develop self-leadership skill.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.7
• /
• pp.55-64
• /
• 2017

A geological repository has been considered one of the most adequate options for the disposal of high-level radioactive waste. A geological repository will be constructed in a host rock at a depth of 500~1,000 meters below the ground surface. The geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is very important to assure the disposal safety of high-level radioactive waste. It can restrain the release of radionuclide and protect the canister from the inflow of groundwater. High temperature in a disposal canister is released into the surrounding buffer material, and thus the thermal transfer behavior of the buffer material is very important to analyze the entire disposal safety. Therefore, this paper presents a thermal conductivity prediction model for the Kyungju compacted bentonite buffer material which is the only bentonite produced in Korea. Thermal conductivity of Kyungju bentonite was measured using a hot wire method according to various water contents and dry densities. With 39 data obtained by the hot wire method, a regression model to predict the thermal conductivity of Kyungju bentonite was suggested.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.96-102
• /
• 2006

Recently, it has been known that Hericium erinaceum is a one of the very useful functional materials with great attention in mushroom processing industry. In present study, a liquid culture which was not studied systematically until now, was conducted as a method of cultivation for H. erinaceum, and also examined the characteristics of the liquid culture and conditions of process optimization. A good basal medium was selected through the cultivation of 16 species mushroom media and the optimum condition for medium and cultivation were chosen by response surface method. From these results, the optimum condition of medium for mushroom was 3% glucose, 0.2% yeast extract/peptone(1:1) and 0.1% $KH_2PO_4/MgSO_4$(1:1) and also the optimal culture condition was obtained at inoculum of 13.42%, temperature of $22.3^{\circ}C$ and pH of 5.7. The mycelial dry weight of 9 g/I was obtained under these conditions and this amount was about 1.7 times higher than that which were cultivated in basal medium for 8 days.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.687-694
• /
• 2014

This study established a displacement ductility ratio model for ductile design for the boundary element of shear walls. To determine the curvature distribution along the member length and displacement at the free end of the member, the distributions of strains and internal forces along the shear wall section depth were idealized based on the Bernoulli's principle, strain compatibility condition, and equilibrium condition of forces. The confinement effect at the boundary element, provided by transverse reinforcement, was calculated using the stress-strain relationship of confined concrete proposed by Razvi and Saatcioglu. The curvatures corresponding to the initial yielding moment and 80% of the ultimate state after the peak strength were then conversed into displacement values based on the concept of equivalent hinge length. The derived displacement ductility ratio model was simplified by the regression approach using the comprehensive analytical data obtained from the parametric study. The proposed model is in good agreement with test results, indicating that the mean and standard deviation of the ratios between predictions and experiments are 1.05 and 0.19, respectively. Overall, the proposed model is expected to be available for determining the transverse reinforcement ratio at the boundary element for a targeted displacement ductility ratio.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2018

This work aims to suggest the most proper Hwangtoh color(ocher) for sidewalks and walkways located at the central part of the city. The actual colors of Hwangtoh samples that were obtained from 3 different locations (mountain walkways) in Busan were measured. In addition, personal preferences of such Hwangtoh colors were evaluated through survey in order to provide a proper standard reference color for urban walkways and sidewalks. With respect to the chromaticity of Hwangtoh obtained in Busan, $a^*$ and $b^*$ values were found to range from 3.6 to 13.6 and 11.4 to 23.4, respectively. It was also found that $L^*$ (lightness) values of 3 different Hwangtoh samples were found to be similar. According to the results from survey, higher values of $+a^*$ (red type) and $+b^*$ (yellow type) were preferred, indicating the red and yellow color needs to be developed stronger from Hwangtoh. Based on these findings, the proper Hwangtoh color used for walkways in urban area was chosen. It was found to be $L^*$ for 32.2~45.8, $a^*$ for 5.2~13.6, and $b^*$ for 15.8~21.2, respectively.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.438-442
• /
• 2007

A biosensor using electrochemically-active bacteria (EAB) enriched in three-electrode electrochemical cell, was developed for the determination of biochemical oxygen demand (BOD) in wastewater. In the electrochemical cell, the positively poised working electrode with applying a potential of 0.7 V was used as an electron acceptor for the EAB. The experimental results using artificial and raw wastewater showed that the current pattern generated by the biosensor and its Coulombic yield were proportional to the concentration of organic matter in wastewater. The correlation coefficients of BOD vs Coulombic yield and $BOD_5$ vs Coulombic yield were 0.99 and 0.98, respectively. These results indicate that the biosensor enriched with the EAB capable of transferring electrons directly toward the electrode can be utilized as a water-quality monitoring system due to a quick and accurate response.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.2
• /
• pp.111-120
• /
• 2011

High-rise buildings have recently increased over the residential, commercial and office facilities, thus an understanding of construction cost for high-rise building projects has been a fundamental issue due to enormous construction cost as well as unpredictable market conditions and fluctuations in the rate of inflation by long-term construction periods of high-rise projects. Especially, recent violent fluctuations of construction material prices add to problems in construction cost forecasting. This research, therefore, develops a time-series model with the Box-Jenkins methodologies and material prices time-series data in Korea in order to forecast future trends of unit prices of required materials. BIM (Building Information Modeling) approaches are also used to analyze injection time of construction resources and to conduct quantity takeoff so that total material price can be forecasted. Comparative analysis of Predictability of tentative ARIMA (Autoregressive Integrated Moving Average) models was conducted to determine optimal time-series model for forecasting future price trends. Proposed BIM based time series forecasting model can help to deal with sudden changes in economic conditions by estimating future material prices.