• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.23-29
• /
• 2017

Solar and wind energy among the renewable energy produce irregular power because resource is difficult to control. When connected to grid have unstable. However, when the fuel cell system is connected to grid more stable because regular frequency and output power based on controllable hydrogen energy. To using fuel cell system in the household, it is important that the safety performance of power conditioning system(PCS) and it is important that evaluation method of electromagnetic compatibility(EMC). In this study, we consider that introduce power-frequency magnetic field immunity test before analyzed that compare with the EMC of the international standards and KGS AB 934 PC53. Also, we conduct that actual assessment and study on available the quantitative analysis as using complementary indicator.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.200-210
• /
• 2006

This C-ring test, normally employed for evaluating susceptibility to stress-corrosion cracking, was determined to be a suitable small scale test to evaluate PWHT(Post-Weld Heat Treatment) cracking susceptibility. This test is possible to incorporate an actual weld, to introduce a notch into the coarse grained HAZ(Heat Affected Zone), to load the coarse grained HAZ any level of stress ad, most importantly, since the C-ring is an approximately constant strain type test, the stress decreases with time at temperature in a manner similar to that of an actual steel weldment. The procedure employed in making the C-ring was presented in the experimental procedure section, however, several points deserve further discussion. The walls of the weld groove are made along radial lines form the center of th var in order to obtain an HAZ which is oriented perpendicular to the walls of the machined C-ring. Therefore, the plane of maximum stress will be aligned through the HAZ and, therefore, crack propagation will not be forced to deviate form the plane of maximum stress in order to remain in the coarse grained HAZ as is the case with the Y groove test.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.46-62
• /
• 2006

The purpose of this study is to propose the new direction in the curriculum and framework of information & communication department in technical high schools through analyzing the propriety of curriculum contents, the relationship among the subjects and the time difference in major subjects and mathematics, respectively. The main results of this study are as follows: (1) The common curriculum to include the number of selective and major subjects were different according to the curriculum and studying hours in each school. The differences were caused by the results of managing the curriculum by which was considered characteristics of schools, department and so on. (2) Mathematical contents are evenly found in 3 units in general communication subjects. The mathematical factors are shown similarly in every item in mathematics10-A, mathematics10-B, and mathematics I. The mathematical contents are found most frequently by 41.2% in the communication basis unit, also there were four items which do not exist in the technical high school mathematics. (3) Mathematical contents are evenly found in every unit of electron circuit subject. The mathematical factors in mathematics10-A are shown more than in mathematics I by 8 items. Mathematical contents are found most frequently in the amplification circuit unit by 22.2% of the electron circuit subject.

• 대한공업교육학회지
• /
• v.37 no.2
• /
• pp.57-75
• /
• 2012

The purpose of this study was to survey and analyze the recognition and needs of elementary school teachers about STEAM education. Mail and E-mail surveys were conducted for 533 elementary school teachers for the purpose of the study. The following were found results of the study were as follow: First, although elementary school teachers understood positively the necessity of STEAM education, showed average levels of recognition on STEAM education. Second, the rate of the elementary school teachers who had experience in applying STEAM education was low. Third, elementary school teachers required to education closely related to real life, and interesting education according to the direction for STEAM education. Fourth, elementary school teachers asked for the integration centering activities related real life, followed by the integration focusing on thema related to real life, the integrating centering student's needs and interests, and the integration focusing on issues according to the appropriate integration methods for STEAM education. Fifth, elementary school teachers required creative design/problem solving ability, academic performance ability, and interpersonal relationship skills with regard to the ability to develop through STEAM education. Lastly, elementary school teachers demanded the development and distribution of STEAM education, teacher's recognition and attitudes towards STEAM education, teacher's training for STEAM education, the distribution of reference materials and etc in order to stimulate STEAM education.

• The KIPS Transactions:PartB
• /
• v.11B no.5
• /
• pp.603-610
• /
• 2004

The distributed Information Retrieval System centrally controlled by mediator or meta search engine result in congestion of heavy traffic and int he problem of increment of cost for the reason of the design of complicated algorithm for central control and installation of hardware. So to figure out this problem, the way is needed that has independent retrieval functionality and can cooperate each other without dependency. In this paper, we overview a few works involved in distributed information retrieval system, then, implement algorithm and design the frame-work of distributed information retrieval system using sequential transferring method(STM) including multiple information retrieval system separated from central control. For this first of all, we present a web partition policy which devide and manage web logically and we present the sequential query processing way by means of illustration through changing numbered information retrieval system. Then, we also present 3-layered structure of framework and function and module of each layer suitable for information retrieval system. Last of ail, for effective implementation of STM algorithm we analysis module structure and present description of pseudocode of this, and show that the proposed STM algorithm works smoothly by demonstration of sequential query transfer process between servers.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.647-654
• /
• 2018

In order to solve the global warming and reduce greenhouse gas emissions, it has been developed the $CO_2$ capture technology by oxy-fuel combustion. But there is a problem that the economic efficiency is low because the oxygen production cost is high. ASU (Air Separation Unit) is known to be most suitable method for producing large capacity of oxygen (>2,000 tpd). But most of them are optimized for high purity (>99.5%) oxygen production. If the ASU process is optimized for low purity(90~97%) oxygen producing, it is possible to reduce the production cost of oxygen by improving the process efficiency. In this study, the process analysis and comparative evaluation was conducted for developing large capacity ASU for oxy-fuel combustion. The process efficiency was evaluated by calculating the recovery rate and power consumption according to the oxygen purity using the AspenHysys. As a result, it confirmed that the optimal purity of oxygen for oxyfuel combustion is 95%, and the power consumption can be reduced by process optimization to 12~18%.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.1-14
• /
• 2012

As the size of the data warehouse is large, the selection of indices on the data warehouse affects the efficiency of the query processing of the data warehouse. Indices induce the lower query processing cost, but they occupy the large storage areas and induce the index maintenance cost which are accompanied by database updates. The bitmap join indices are well applied when we optimize the star join queries which join a fact table and many dimension tables and the selection on dimension tables in data warehouses. Though the bitmap join indices with the binary representations induce the lower storage cost, the task to select the indexing attributes among the huge candidate attributes which are generated is difficult. The processes of index selection are to reduce the number of candidate attributes to be indexed and then select the indexing attributes. In this paper on bitmap join index selection problem we reduce the number of candidate attributes by the data mining techniques. Compared to the existing techniques which reduce the number of candidate attributes by the frequencies of attributes we consider the frequencies of attributes and the size of dimension tables and the size of the tuples of the dimension tables and the page size of disk. We use the mining of the frequent itemsets as mining techniques and reduce the great number of candidate attributes. We make the bitmap join indices which have the least costs and the least storage area adapted to storage constraints by using the cost functions applied to the bitmap join indices of the candidate attributes. We compare the existing techniques and ours and analyze them in order to evaluate the efficiencies of ours.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.561-574
• /
• 2008

The spot detection phase of the 2-DE image analysis program segments a gel image into spot regions by an image segmentation algorithm and fits the spot regions to a spot shape model and quantifies the spot informations for the next phases. Currently the watershed algorithm is generally used as the segmentation algorithm and there are the Gaussian model and the diffusion model for the shape model. The diffusion model is closer to real spot shapes than the Gaussian model however spots have very various shapes and especially an asymmetric formation in x-coordinate and y-coordinate. The reason for asymmetric formation of spots is known that a protein could not be diffused completely because the 2-DE could not be processed under the ideal environment usually. Accordingly we propose an asymmetric diffusion model in this paper. The asymmetric diffusion model assumes that a protein spot is diffused from a disc at initial time of diffusing process, but is diffused asymmetrically for x-axis and y-axis respectively as time goes on. In experiments we processed spot matching for 19 gel images by using three models respectively and evaluated averages of SNR for comparing three models. As averages of SNR we got 14.22dB for the Gaussian model, 20.72dB for the diffusion model and 22.85dB for the asymmetric diffusion model. By experimental results we could confirm the asymmetric diffusion model is more efficient and more adequate for spot matching than the Gaussian model and the diffusion model.

• The KIPS Transactions:PartA
• /
• v.15A no.2
• /
• pp.125-134
• /
• 2008

We implemented a system being able to suggest example sentences for multiple choice tests, considering the level of students. To build the system, we designed an automatic method for sentence generation, which made it possible to control the difficulty degree of questions. For the proper evaluation in the multiple choice tests, proper size of question pools is required. To satisfy this requirement, a system which can generate various and numerous questions and their example sentences in a fast way should be used. In this paper, we designed an automatic generation method using a linguistic resource called WordNet. For the automatic generation, firstly, we extracted keywords from the existing sentences with the morphological analysis and candidate terms with similar meaning to the keywords in Korean WordNet space are suggested. When suggesting candidate terms, we transformed the existing Korean WordNet scheme into a new scheme to construct the concept similarity matrix. The similarity degree between concepts can be ranged from 0, representing synonyms relationships, to 9, representing non-connected relationships. By using the degree, we can control the difficulty degree of newly generated questions. We used two methods for evaluating semantic similarity between two concepts. The first one is considering only the distance between two concepts and the second one additionally considers positions of two concepts in the Korean Wordnet space. With these methods, we can build a system which can help the instructors generate new questions and their example sentences with various contents and difficulty degree from existing sentences more easily.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2016

In this study, the bond strength of metal spraying system by surface treatment of concrete (waterproof/corrosion method) in water treatment facilities was evaluated. The results showed that the system with Sa-P-R-(S) (sanding-perviousness surface hardener-surface roughness agent-metal spraying-sealing) led to the desirable performance. The bond strength, the coefficient of water permeability and air permeability were 3.7MPa, $0.68{\ast}10^{-8}cm/sec$, and $0.45{\ast}10^{-16}m^2$, respectively. In scanning electron microscope analysis, the microstructure of specimen coated with perviousness surface hardener was much denser than that without it. Therefore, the specimen coated with sanding-perviousness surface hardener-surface roughness agent-metal spraying-sealing had the best bond performance and was the most suitable system to concrete surface in water treatment facilities.