• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.256-260
• /
• 2008

In this study, the composition of saponin and physico-chemical properties of Korean red ginseng extract was analyzed based on various extracting conditions. The total saponin and individual ginsenoside concentration of the red ginseng extract showed a decreasing trend as the extracting temperature and time increased; also, the extracting condition at $75^{\circ}C$ for 24 hours showed the highest concentration. In contrast, the concentration of $Rg_3$ increased as the extracting temperature and time increased within the particular range. It was suggested that a certain part of ginsenosides changes to $Rg_3$ according to extracting conditions; thus, the concentration of $Rg_3$ increased. Physico-chemical properties of Korean red ginseng extract based on the extracting conditions were different compared to those for saponin; so, as the extracting temperature and time increased, brix and color difference increased but pH decreased indicating stabilization of the overall quality of the product. Therefore, the most appropriate extracting condition for both the product quality of Korean red ginseng extract and stable extraction of saponin was $80^{\circ}C$ within 48 hours, minimizing the loss of ginsenosides.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.302-310
• /
• 2020

In this paper, we have implemented the living waste analysis system based on IoT and AI(Artificial Intelligence), and proposed effective waste process and management method. The Jeju location have the strong point to devise a stratagem and estimate waste quantization, rather than others. Especially, we can recognized the amount variation of waste to the residence people compare to the sightseer number, and the good example a specific waste duty. Thus this paper have developed the IoT device for interconnecting the existed CCTV camera, and use the AI algorithm to analysis the waste image. By using these decision of image analysis, we can inform their deal commend and a decided information to the map of the waste cars. In order to evaluate the performance of IoT, we have experimented the electromagnetic compatibility under a national official authorization KN-32, KN61000-4-2~6, and obtained the stable experimental results. In the further experimental results, we can applicable for an data structure for precise definition command by using the simulated several waste image with artificial intelligence algorithm.

• Journal of the Korean Geographical Society
• /
• v.48 no.6
• /
• pp.944-966
• /
• 2013

This study attempts to highlight the cultural importance of urban public space by analyzing the changes Tap-Gol Park from late 1990's to early 2000's, a park located in the heart of Seoul, underwent in its meanings and uses. Public space, a product of modern urban planning, is characterized by its openness and accessibility and represents the vitality of modern city, serving as a meeting place for citizens with different social backgrounds at such occasions as gatherings and festivals. While the government or a few dominant groups try to control the public and their behavior in public space by giving a specific meaning to it and specifying its use, people constantly set their foot in it and view the space as a place differently for each individual's personal or social reasons. It is therefore not very surprising that the meaning of public space has never been successfully defined. Following the traces of attempts to define the meaning of public space and considering how public space can be efficiently used will shed light on what types of groups, especially ages and classes participated in the contest for the use of public space and expressed their own cultures in urban society through various negotiations.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.131-149
• /
• 1999

It was found that surface roughness has a first-order effect on the interface shear strength and accordingly it should be accurately quantified if its role is to be properly understood. To quantify the surface topography, first of all, a variety of commonly used surface roughness parameters and profiling methods were reviewed in this study. Based on this review, the normalized roughness parameter. $R_n$(Uesugi and Kishida, 1986), the profile roughness parameter, $R_L$, and the surface roughness parameter, $R_n$(Dove and Frost, 1996), were selected to be appropriate candidates of roughness parameters and the digital image analysis based Optical Profile Microscopy(OPM) method(Dove and Frost, 1996) to be an appropriate profiling method for this study. Using a smooth and three textured HDPE geomembranes which encompass the range of textures and texture patterns commonly used, a series of roughness measurements on virgin and previously used geomembranes were performed. The results showed that both $R_L\; and\; R_S$ values appropriately reflect the degree of texturing for the geomembranes used in this study, however, $R_n$ value showed limited ranges of variation which may not be sufficient to permit distinction between roughness values for certain conditions. The results of this study will be extended to the investigation of the influence of surface roughness on interface strength in future study.

• Journal of the HCI Society of Korea
• /
• v.7 no.2
• /
• pp.35-42
• /
• 2012

The purpose of this study was to evaluate the usability of the tablet PC-based Korean high-tech AAC(Augmentative Alternative Communication System) software. In order to develop an AAC software which is appropriate to Korean cultural/linguistic contexts and communication needs of the users, we examined the necessity and ease of use for the communication functions that are required in native Korean communication, such as polite expressions, tense expressions, negative expressions, subject-verb auto-matching, and automatic sentence generation functions, using a scenario-based user testing. We also investigated the users' needs, preferences, and satisfaction for the tablet PC-based Korean high tech AAC using a semi-structured and open questionnaires. The participants of this study were 9 special education teachers, 6 speech therapists, and 6 parents whose children had communication disabilities. The results of the usability testing of the tablet PC-based Korean high-tech AAC software presented positive responses in general, by indicating overall scores of above 4 out of 5 except in tense and negative expressions. The necessity and ease of use in the tense and negative expressions were evaluated relatively low, and it might be related to the inconsistent interface with the polite expressions. In terms of the user interface(UI), there were users' needs for clear visual feedback in the symbol selection and display, consistent interface for all functions, more natural subject-verb auto-matching, and spacing in the text within symbols. The results of the usability testing and users' feedback might serve as a guideline to compensate and improve the function and UI of the existing AAC software.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.57-71
• /
• 2019

This study intended to analyze the ethical clothing consumption behavior of female adolescents and use it as a basic data for education. Specifically, the female adolescents were classified according to their shopping orientation and then the differences among these groups were examined in terms of their ethical consumption behavior of clothing products, i.e., buying, using and disposing. As a result, three groups were identified: pleasure-seeking, intermediate, independence pursuing according to the shopping orientation sub-factors (loyal, enjoyment, impulsive, imitative and independent). The pleasure-seeking group were more likely to conduct ethical use behavior of clothing products, while the independence-pursuing group conducted more ethical buying and ethical disposing behavior. The lower their desire to enjoy shopping itself, the more cautious they are about their own decisions, and the more confident they about buying from the brand and store they liked, the more likely they were to conduct ethical buying behavior of clothing products. On the other hand, when the emotional and desire-seeking tendencies are combined with independent shopping tendencies, the more likely they conduct ethical use behaviors. In addition, the more they make independent purchasing decisions, the more likely they are to conduct ethical disposal behaivors. The results of this study suggest that providing detailed consumer education that considers individual differences in shopping orientation is needed.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.23-39
• /
• 2019

The purpose of the study was to analyze the home economics education experts' and teachers' perception of ways to align instruction with evaluation, based on the 2015 revised technology and home economics curriculum for the purpose of developing the independent living competencies, and to provide examples of alignment in practice. The analysis is based on the data from a Delphi study (10 experts) and a survey of technology and home economics teachers(n=422). The results of survey indicated that experts and teachers perceived the instruction-assessment alignment to be most appropriate for project learning-project assessment, followed by project learning-portfolio assessment, problem solving learning-portfolio assessment, and problem solving learning-project assessment, in order. Based on the survey results, a model of instruction-assessment alignment and a teaching-learing plan were presented, based on 'Development task of life cycle and Life plan' unit. This was considered to be a proper method of instructional alignment for the purpose of developing 'independent living competence' with project-learning/project-assessment. The model focuses on consistency between instruction and evaluation, unity in methods, and the availablility of feedbacks of assessment for the improvement of independent living competencies. In conclusion, this study contributes as foundational information for teaching and learning-assessment alignment. Diverse methods of instruction-evaluation alignment is expected for future research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1788-1795
• /
• 2017

In this paper, we proposed a service that provides CPA/TCPA information to ships, without ARPA/ATA devices to support decision making of the navigator for maritime safety based on various services at shore and off-shore. To verify the proposed service, we use SiNAS (scenario-based simulator for NAS) with CPA/TCPA information providing software to evaluate its usability, because executing the test in real ship has many limitations and difficulties. To do this, we specify two simulation scenarios for the required purpose, and we liaise twelve participants with various navigation experience to conduct the simulations. Also, we analyze the results of simulation using mission success or not, the minimum approaching distance with the target ship, the time of a recognition the target ship, the time of a first action for collision avoidance with the target ship, and so on. Then, we evaluate usability of the proposed service based on the three elements which are effectiveness, efficiency and satisfaction.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.65-77
• /
• 2016

Modeling for complex reacting flow in Fischer-Tropsch reactor is one of the challenges in the field of Computational Fluid Dynamics (CFD). It is hard to derive each and every reaction rate for all chemical species because Fisher-Tropsch reaction produces many kinds of hydrocarbons which include lots of isomers. To overcome this problem, after analyzing the existing methodologies for reaction rate modeling, non-Anderson-Schulz-Flory methodology is selected to model the detailed reaction rates. In addition, the inside flow has feature of multi-phase flow, and the methodologies for modeling multi-phase flow depend on the interference between the phases, distribution of the dispersed phase, flow pattern, etc. However, existing studies have used a variety of inside flow modeling methodologies with no basis or rationale for the feasibility. Modeling inside flow based on the experimental observation of the flow would be the best way, however, with limited resources we infer the probable regime of inside flow based on conventional fluid dynamics theory; select the appropriate methodology of Mixture model; and perform systematic CFD modeling. The model presented in this study is validated through comparisons between experimental data and simulation results for 10 experimental conditions.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.33-43
• /
• 2016

Grinding, weld deposition, type A sleeve, type B sleeve, composite sleeve, hot tapping and clamp are used as the method to repair the buried pipelines in the United States, UK and Europe. In the event of defect to the pipeline, they have repaired the pipeline through the fitness-for-service assessments. In addition, they have guidelines for the possible repair methods to apply to each type of damage, which is occurred due to the 3rd party construction or corrosion. According to the KGS FS551, Safety Validation in Detail including ECDA(External Corrosion Direct Assessment) as one method of integrity management should be carried out for the old pipeline which supply natural gas as the middle pressure in Korea. Where a defect on the pipelines is found, on the result of Safety Validation in Detail, the pipelines should be repaired or replaced by new piping. However, there are no guidelines or regulations regarding the repair and reinforcement of pipeline, so that, cutting the damaged pipeline and replacing it as a segment of new pipe is the only way in Korea until now. We have suggested pipeline repair methods including type A, B sleeve, composite sleeve, after the survey of foreign repair method and standards including the method of United States and the United Kingdom, and after analysis of the results on pipeline repair test including type A, type B sleeve and composite sleeve.