• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.31-35
• /
• 2006

This paper is studied on a protective control system for electrical fire used electrical characteristics of SCR and multilayer-type PTC thermistor. The PTC thermistor has characteristic or positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with $BaTiO_{3_}$Ceramics of positive temperature coefficient. Also PTC shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point. This paper is proposed on a protective control system used multilayer-type PTC which is protected from electrical fire due to electric short circuit faults or overload faults. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.165-171
• /
• 2004

In this paper, the modeling and design of high-Q multilayer passives have been investigated, and multilayer diplexer for GSM/DCS applications has been designed and fabricated using the passives. Modeling of a multilayer inductor was performed by the subsystems of distributed components, and using the modeling the optimal structures of the high-Q multilayer inductor could be designed by analyzing parasitics and couplings which affect their frequency characteristics. Multilayer diplexers for GSM/DCS applications have been designed and fabricated using LTCC technology. LPF for GSM band had the passband insertion loss of less than 0.55 dB, the return loss of more than 12 dB, and the isolation level of more than 26 dB. HPF for DCS band had the passband insertion loss of less than 0.82 dB, the return loss of more than 11 dB, and the isolation level of more than 38 dB.

• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2019

Purpose: The purpose of this study is to suggest a systematic improvement plan for strengthening fire fighting ability of domestic rack- type warehouse buildings. Method: A fire case of small warehouse with sandwich panel structure and four design review of large warehouse with fire endurance structure were analyzed. Also, interviewed a group of 11 fire fighters who had 20 years field experience. Results: A provision of mobile equipment for initial fire fighting, accessibility of more than three sides, installation of internal entrance windows, proper placement of outdoor fire fighting equipment, image processing of fire site informations, and provide more incentives on the field commander are main factors of improvement plan. Conclusion: Effective standard operation procedures (SOP) and safety standards should be established and applied for each stage of the dispatch and on-site response considering the fire characteristics and risk factors of each warehouse by scale.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.199-207
• /
• 1996

When an initially straight thin cylinder is bent, there is a tendency for the cross section to flatten. This phenomenon was investigated by L.G. Brazier in 1927 and is called "Brazier Effect" or "Brazier Theory". The main characteristic is the reduction of carrying capacity due to the decrease of bending stiffness by shortening of thickness with the increase of external load. And the relationship of curvature-bending moment becomes a soft spring type as shown in Fig.2. In this paper, the Brazier theory on plate type structures is investigated from the following view points : (1) What is the Brazier effect? (2) the reason of the occurrence of the Brazier effect in plate type structures by using beam model and (3) factors which cause the brazier effect.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.173-176
• /
• 2012

This paper introduces a novel horn antenna for circular polarization using a planar-type radiator. This antenna can be divided to two parts, microstrip antenna and square horn. The microstrip antenna has the role of feeder and polarizer of the horn antenna, and it is designed to stacked type having metal spacer for high gain, high isolation and wideband characteristic. Using the proposed antenna structure, the horn antenna needs not additional structure such as feeder and polarizer, and the size of it can be considerably reduced. The horn antenna has typical gain of 8dBi and 3-dB axial-ratio bandwidth around 4.9%.This antenna can widely used for various antenna system for mobile and satellite communication using circular polarization expecially in high frequency band.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.273-278
• /
• 1998

In this paper, basic micro-mechanical properties of unidirectional CFRP composite shell such as bonding strength, fiber volume fraction and void fraction are measured and tensile strength test is performed with a fixture. And then fracture surfaces are observed by SEM. In case of basic micro-mechanical properties, bonding strength is reduce with decreasing of radius of each ply in a shell for the effect of residual stress, fiber volume fraction is smaller than plate, and void fraction is vise versa. For these reason, tensile strength of shell is smaller than plate fabricated with same prepreg. For failure mode shell has many splitted part along its length, and it is assumed that this phenomenon is caused by the difference of bonding strength for residual stress.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.4
• /
• pp.37-42
• /
• 2001

Active vibration control of laminated composite plates has been carried out to design structure with maximum possible damping capacity, using piezoceramic sensor/actuators and passive constrained-layer damping treatment. The equations of motion are derived for symmetrical, multi-layer laminated plates. The damping ratio(ζ) and modal damping(2ζ$\omega$) of the first bending and torsional modes are calculated by means of iterative complex eigensolution method for both passive and active vibration control. This paper addresses a design strategy of laminated composite plate under structural vibrations.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.73-79
• /
• 2001

정전기력을 이용하는 마이크로가속도계 센서는 단결성 실리콘 SOI(Silicon On Insulator) 웨이퍼의 기판에 절전재료 적층과 등방성 및 이방성 부식공정으로 제작한다. 마이크로가속도 센서 개발에는 3차원 미소구조체의 제작공정에서 가열 및 냉각공정의 온도구배로 야기되는 포핑업과 같은 열변형 해석이 최적 형상설계에 중요한 요건이다. 본 연구에서는 양자역학적 현상인 턴널링전류 원리로 승용차 에어백의 검침부 역할을 하는 마이크로가속도 센서의 제조공정에서 소착현상을 방지하는 부가 비임과 턴널갭의 FIB 절단가공과 백금 적층공정의 열적 거동을 해석한다. 마이크로머시닝 공정에서 온도의존성을 고려하여 연성해석하고 유한요소법의 상용코드인 MARC K6.1로 분석한 결과를 단결정 실리콘 웨이퍼로 가공하는 마이크로가속도 센서의 최적공정 및 형상설계를 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.220-228
• /
• 1997

We discuss finite element approximation and use a Mindlin plate element based upon uniformly reduced numerical integration. The finite element selected for use in this work is a four-node, bilinear displacement element based upon the Mindlin theory of plates. Such elements show good accuracy for laminated composite plates when reduced numerical integration is used to evaluate the element marices. This study presents both the experimental and F.E. results for the natural frequencies of CFRPURETHANE-CFRP Composite plate. Good agreement between experimental and calculated frequencies is achived.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.305-305
• /
• 2008

LTCC는 고주파영역에서 손실이 낮고 적층구조의 모듈제작이 가능하여 고주파용 모듈제작에 응용이 가능하다. 최근 수동소자가 내장된 ASM이나 FEM 등의 모듈은 그 집적도가 높고 기판의 두께가 감소함에 따라 소재의 고강도 특성이 요구되고 있다. 이와 같은 경향에 따라 Anorthite계 결정화 유리로 알려진 300MPa 이상의 고강도를 나타내는 CaO-Al2O3-SiO2계 소재가 선행 연구 과정을 통하여 개발되었다. 본 실험에서는 기 개발된 조성의 고강도 소재를 이용하여 RF부품에 적용하기 위한 테스트 쿠폰을 제작하였다. 고강도 소재를 이용하여 green sheet를 제조하고 수동소자인 R, L, C 등을 기판 내에 내장화 하기위해 LTCC 공정을 이용하여 각 층에 다양한 선폭 및 크기의 패턴을 인쇄한 뒤 적층하여 $900^{\circ}C$에서 소결하였다. 이 과정에서 공정에 대한 적용성이 각 공정별로 평가되었으며 완성된 테스트 쿠폰을 이용하여 소재의 전기적인 특성을 평가하였다.