• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.105-113
• /
• 2014

The current study was performed to investigate the effects of dietary supplementation of dried coffee meal (CM) on growth performance, intestinal and blood biochemical index, intestinal enzymes, and cecal microbial populations. A total of 162, 3-day-old male broiler chicks were randomly allocated into three dietary groups: control group (CON), basal diet added with 0.5% CM (CM I), and basal diet added with 1.0% CM (CM II). Dietary supplementation of CM did not change bird performance and the relative weight of intestinal mucosal tissues. The birds fed the diet supplemented with CM (0.5 and 1.0%) significantly decreased mucosal glucose concentration (P<0.05) without affecting blood glucose level compared with those fed control diet. The level of blood aspartate aminotransferase (AST) significantly increased in CM II group (P<0.05) without affecting ${\gamma}$-glutamyl transpeptidase (${\gamma}$-GTP) compared with that in the CON group. The specific activity of intestinal maltase, leucine aminopeptidase (LAP) and alkaline phosphatase (ALP) were not affected by dietary supplementation of CM, whereas sucrase activity in birds fed the diet supplemented with CM was decreased (P<0.05) compared to that in the control birds. The colony forming units (CFU) of E. coli in the cecum of CM-fed birds was significantly decreased (P<0.05) compared with that of control birds without changing the CFU of Lactobacillus. In conclusion, dietary supplementation of lower level of CM (0.5%) can be used as a beneficial feed resource without liver toxicity in broiler chicks.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.61-66
• /
• 2010

Purpose: Recently, Department of Nuclear Medicine have an interest in Video Display Terminals (VDT) syndrome including musculoskeletal disorders, ophthalmologic disorders, trouble of electromagnetic waves and stress disorders occur to VDT workers as the growing number of users and rapid pace of service period supply in large amount. This study research on the actual condition for VDT syndrome in Nuclear Medicine, Seoul National University Hospital (SNUH), discover the problem and draw a plan of upcoming improvement. The aim of this study establish awareness about VDT syndrome and is to prevent for it in the long run. Materials and Methods: Department of Nuclear Medicine, SNUH is composed Principle part, Pediatric part and PET center. We estimated risk factors visit in each part directly. Estimation method use "Check list for VDT work" of Wonjin working environment health laboratory and check list is condition of VDT work, condition of work tables, condition of chairs, condition of keyboards, condition of monitors, working position, character of health management and other working environment. Analysis result is verified in Department of Occupational and Environment, Hallym University Sacred Heard Hospital. Results: As a result of analysis, VDT condition of Department of Nuclear Medicine, SNUH is rule good. In case of work tables, recent of things are suitable to users upon the ergonomical planning, but 15% of existing work tables are below the standard value. In case of chairs are suitable, but 5% of theirs lost optimum capacity become superannuated. The keyboards are suitable for 98% of standard value. In case of monitors, angle control of screen is possible of all, but positioning control is impossible for 38%. In case of working position, 10% is fixed positioning for long time and some of the items researched unsuitable things for standard. At health management point, needed capable of improvement. Also, other working condition as lighting, temperature, noise and ventilation, discovered the problem, but is sufficient to advice value. Conclusion: VDT syndrome is occurrences of possibility continuously, come economical expensive about improvement, is inherent in various causes and originate without your knowledge. So, there is need systematic management system. In Nuclear Medicine, VDT syndrome make it better that constant interest and effort as improvement of ergonomical working environment, improvement of working procedure, regular exercise and steady stretching, and can be prevented fairly. This promote physical and mental condition of worker in top form in comfortable working environment, so this is judged by enlargement of operations efficiency and rising of satisfaction ratings of the inside client.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.5-16
• /
• 2012

In the case of using the soil materials created by cutting in-situ ground directly without adjusting particle size, it is recommendable to seek the compaction property or material constant required for filling design or density control through indoor test, and many studies on this subject have been carried out during that time. The researches conducted during that time, however, were focused on the mixed materials with different diameters that exist in a natural condition. There has been no study conducted using coal fly ash that is by-product of the thermal power plant that is actively considered as the building materials. Therefore, this study was aimed at implementing compaction test and examining the basic engineering property in order to explore the influence of crushing the particles through compacting the admixture of crushed stone and coal fly ash produced from thermal power plant on its engineering property, and then the impact of the admixture volume of each material on compaction property and material property by conducting the One-Dimensional Compression Test. As result of compaction test, the optimum moisture ratio of coal fly ash was shown to be approx. 23%. As result of compaction test in accordance with the mixed ratio of coal fly ash and crushed stone under the same compaction energy and moisture ratio, dry unit weight tended to drop when the mixed ratio of coal fly ash exceeded 30%, while it reached approx. $1.81gf/cm^3$ when the mixed ratio was 30%. As result of One-Dimensional Compression Test in accordance with the mixed ratio of crushed stone and coal fly ash, the change in void ratio by particle crushing was at the highest level in the case of coal fly ash 100%, while the lowest level in the case of crushed stone 100%. In the case of mixed materials of crushed stone and coal fly ash, compression index was at the lowest level in case of coal fly ash 30%, and therefore this ratio of mixed material was judged to be the most stable from an engineering aspect.

• Journal of Life Science
• /
• v.19 no.1
• /
• pp.65-74
• /
• 2009

The objective of this study was to examine the effects of steam flaking treatment of corn grains imported from USA and India on in vitro gas production, microbial growth and contents of aflatoxin $B_1$ and ochratoxin A. Each treatment was composed of total 4 treatments including (1) USCW (US com-whole type), (2) USCF (US corn-flaked type), (3) IDCW (India corn-whole type) and (4) IDCF (India orn-flaked type) with 4 replications $\times$ 6 incubation times (3, 6, 9, 12, 18 and 24 hr). Mycotoxin (aflatoxin $B_1$ & ochratoxin A) contents in test corns tended to increase gradually with increasing logistics periods from the harbor, hopper, silo to processing line. The contents of aflatoxin $B_1$ in India corn (IDCW) and US corn (USCW) were 11.71 and 1.78 ppb, respectively when measured at the hopper. After steam flaking, both contents of aflatoxin $B_1$ in USCW and IDCW were 0.00 ppb. It means that Aspergillus flavus could be decreased by steam flaking. However, this trend was not observed in ochratoxin content. The gas production rate of USA corns (USCW & USCF) was significantly (p<0.05) higher than India corns (IDCW & IDCF), and that of steam flaked corns (USCF & IDCF) was higher $1.5{\sim}2%$ than whole corns (USCW & IDCW) after 3 hr incubation in in vitro experiment. pH value was optimally maintained for microbial growth during whole incubation times with the value of 6.05 to 6.54, and was not significantly different between treatments, but USCF was somewhat lower than other treatments. pH value decreased following 12 hr of incubation but gas production increased rapidly during the same period. In addition, in vitro microbial growth rates also increased with up to 18 hr of incubation period, thereafter experienced a decrease with extended incubation time. In conclusion, US corn was superior to India corn by origin based on the results of in vitro and mycotoxin contents. And steam flaking process of imported corns tended to decrease mycotoxin contents such as aflatoxin $B_1$ and ochratoxin A as well as improve in vitro gas production and microbial growth rates.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.441-450
• /
• 2011

This study was conducted to determine the effects of partial replacement of corn grain and soybean meal with agricultural by-product feeds on in vitro rumen fermentation characteristics and optimum levels of mixing ratio. The agricultural by-products to examine the effectiveness of the partial replacement of concentrate were wheat bran, corn gluten feed, bakery waste, soybean curd, rice bran, green kernel rice, soybean hull, distillers' grain, and mushroom substrate. In the first experiment, in vitro ruminal fermentation characteristics of feedstuffs were evaluated at 0, 3, 6, 12, 24, and 48 hours after incubation. In the second experiment, fermentation characteristics were investigated with green kernel rice and soybean curd which replaced corn grain or soybean meal. Feed were formulated with 40% corn grain + 20% soybean meal (T1), 40% corn grain + 17.5% soybean meal + 2.5% soybean curd (T2), 25% corn grain + 20% soybean meal + 15% green kernel rice (T3), and 30% corn grain + 15% soybean meal + 6% green kernel rice + 9% soybean curd (T4), respectively, with forage source of 10% alfalfa hay, 20% timothy hay, and 10% corn silage as fed-basis. In 24 and 48 hour cultivations, T4 showed significantly lower pH compared to T1, whereas in 3 and 24 hour cultivations, T4 showed significantly higher DM degradation compared to T1. In addition, the gas production of T3 was also higher than T1 (p<0.05). Overall results of the present experiments indicated that green kernel rice and soybean curd as agricultural by-products have the possibility of partial replacements of corn grain and soybean meal.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.95-95
• /
• 2018

강재의 방식법 중 도장은 부식을 억제하는데 효과적이고 편리한 방법으로 선박 및 해양 강 구조물의 방식법으로 사용되고 있다. 한편, 강 구조물의 효율적인 유지관리를 위해서는 방식 도장의 도막 열화도를 평가하고 잔존 수명을 예측하여 최적 시기에 보수도장 혹은 재도장하는 것이 필요하다. 일반적으로 선박 및 해양구조물에 적용되는 도막의 방식 성능 평가 방법으로 해수 침지 시험, 염수 분무 시험, 옥외 폭로 시험 등이 있다. 그러나 이러한 시험들은 그 시험 방법에 따라서 정량적인 평가에 한계가 있음은 물론 장기간 소요되는 등 곤란한 문제점이 있다. 그러므로 선박 및 해양구조물을 비롯하여 교량, 각종 강 구조물의 도장 방식에 사용되는 방식용 도료의 성능을 단기간에 적절하게 평가할 수 있는 가속시험법이 제시되며 연구-사용되고 있다. 그 중 도막 방식 성능을 보다 효율적, 비파괴적, 정량적으로 평가할 수 있는 임피던스 분광법(EIS)과 같은 전기화학적 방법은 상대적으로 시험 기간을 크게 단축시킬 수 있고, 대상 방식 도장의 미세한 성능 차이도 분별 가능하다는 장점이 있다[1]. 따라서 본 연구에서는 선박 및 해양구조물 등 가혹한 부식환경에서 강력한 내구성을 가질 수 있도록 다양한 종류의 표면처리 도장 시편을 제작하여 자외선 조사-염수분무-침지환경 등의 열악한 환경조건 하에서 부식-열화 촉진 시험을 실시하였다. 그리고 그 촉진 열화 과정에서 도막의 외관 상태를 관찰 분석함은 물론 전기화학적 임피던스 분광법을 병행 측정하며 그 표면막의 부식 및 도막 열화도를 비교-종합 평가하였다.본 연구에 사용된 시편은 Al 및 Zn 도금 강판에 에폭시, 에폭시-실리콘 우레탄, 에폭시-우레탄 도장 시편으로 Scribe, No Scribe 및 비교재 Al 및 Zn 도금 시편으로 분류하여 각각 실험을 진행하였다. 즉, 도막 열화 시험은 복합 노화 시험법으로 UV 조사 36 시간(ASTM G53), 염수분무 32 시간(ISO 7253), 수분 응축 10 시간을 1 Cycle로 100 Cycle(7800 시간) 동안 실험을 진행하였다. 이때 도막 열화도 평가는 전기화학적 임피던스 분광법을 이용하여 각 실험 조건별로 주파수에 따른 임피던스(Z) 값을 평가하였다. 즉, 상온 $25^{\circ}C$의 3.5% NaCl 100 ml 수용액에 작동 전극(Working Electrode)과 구리 도선을 통해 연결하였고, 노출 면적은 $1cm^2$로 일정하게 유지 하였으며, 상대 전극(Counter Electrode)은 탄소봉, 기준 전극(Reference Electrode)으로 포화카로멜전극(Saturated Calomel Electrode)을 사용하여 측정하였다. No Scribe 시편의 경우에는 Al 기판 에폭시-실리콘 우레탄 도장 시편이 우수한 도막 저항성을 나타내었으며, 에폭시-우레탄 도장시편은 23사이클 이후의 저항값이 가장 낮게 나타났다. Zn 기판의 경우는 에폭시, 에폭시-실리콘 우레탄, 에폭시-우레탄 도장 시편 모두 저항 값이 유사하였으며, Al 및 Zn 도금 시편은 도장 처리된 시편에 비해 훨씬 낮은 저항 값을 보였다. 또한 Scribe 시편의 경우에는 Al 기판 에폭시-실리콘 우레탄 도장 시편에서 높은 초기 저항 값을 보였으며, 23 사이클 후의 저항 값은 세 종류의 도막에서 약 1~0.1 Gohm 으로 나타났다. 그리고 Zn 기판 에폭시-실리콘 우레탄 도장 시편에서 가장 낮은 도막 저항 값이 나타났다. 이상의 실험을 통해서 본 연구 내용은 실내촉진시험으로 선박 및 해양 강 구조물에 사용되는 다양한 종류의 도막의 열화도를 평가하는 기초 설계 지침으로 응용될 수 있을 것으로 사료된다. 한편, 도막은 노출 환경에 따라 방식 성능이 다르므로 실제 도막의 사용환경을 고려하여 도장 사양별 적용 부위에 따른 적정 가속 실험 방법을 선정할 필요가 있다고 사료된다.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.119-126
• /
• 2011

The study was conducted to investigate the effects of dietary energy and protein levels on productivity and feed cost in crossbred chicks. Experiment was divided into starting (0~5 weeks), growing (6~10 weeks), and finishing (11~14 weeks) periods. Design of feeding trials was 3 ${\times}$ 3 factorial to feed different energy and protein levels for starting (ME 2,950, 3,000, and 3,050 kcal/kg CP 18, 19, and 20%), growing (ME 3,000, 3,050, and 3,100 kcal/kg CP 17, 18, and 19%) and finishing (ME 3,050, 3,100, and 3,150 kcal/kg CP 16, 17, and 18%) periods, respectively. In the starting period, weight gain and FCR was improved by dietary protein level (P<0.05). Interaction effect existed in feed intake and FCR (P<0.05). Weight gain was higher in 3,000 kcal/kg ME treatment than 3,100 kcal/kg ME treatment for growing period (P<0.05). In finishing period, feed intake was significantly decreased in ME 3,150 kcal/kg treatment than the other ME treatments (P<0.05). Feed cost/weight gain (FC/WG) was significantly decreased in chicks fed with 2,950 kcal/kg ME and 19% CP in starting period (P<0.05). For the growing period, FC/WG was notably increased in ME 3,000, 3,050 kcal/kg treatment than ME 3,100 kcal/kg treatment, and the FC/WG of CP 17, 18% treatment was significantly higher than CP 16% treatment (P<0.05). Thus, the optimum levels of ME and CP to improve the productivity and feed cost for starting, growing and finishing periods were 2,950 kcal/kg ME, 19% CP 3,000 kcal/kg ME, 18% CP and 3,100 kcal/kg ME, 17 or 16% CP, respectively.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.499-508
• /
• 2008

This study was conducted to evaluate the effect of bio-starch from corn processing to replace dried whey in weaned pigs. A total of 120 crossbred [(Landrace×Yorkshire)×Duroc] pigs were weaned at 21 days of age weighing 6.01±0.34 kg in average. Five week feeding trial consisted of phase 1(0~2 wks) and phase 2(3~5 wks). Dietary treatments included 1) CON(basal diet), 2) BS5(whey 5%, partial substitution of bio-starch), 3) BS10(whey 10%, partial substitution of bio-starch) and 4) BS15(whey 15%, partial substitution of bio-starch). There were four dietary treatments with six replicate pens per treatment and five pigs per pen. During the overall period, there were no significant differences in the ADG(average daily gain) and gain/feed ratio among the treatments(P>0.05). However, the ADFI(average daily feed intake) was higher in BS5 and BS15 treatments than in CON treatment(P<0.05). At the 2nd week, dry matter and nitrogen digestibility were increased(quadratic effect, P=0.03 and P=0.01, respectively; cubic effect, P<0.001 and P=0.01, respectively) with the highest at 10% of bio-starch inclusion in the diets. At the last week of the experiment, dry matter, nitrogen and energy digestibility were increased(P<0.05) with the highest at 5% of bio-starch inclusion in the diets. At the 2nd week total protein concentration was increased(linear effect, P=0.04; cubic effect, P=0.01) with the highest at 10% of bio-starch inclusion in the diets. Also, BUN(blood urea nitrogen) was increased(linear effect, P=0.01) as the level of bio-starch inclusion increased in the diets. Fecal consistency score was inclined to lowers CON treatment than other treatments. In conclusion, the result of trial indicates that bio-starch can be included at the level of 5~10% of weaning pig diet replacing part of the dried-whey, and digestibilities were positively affected by bio-starch at growth stage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.3
• /
• pp.159-168
• /
• 2005

This experiment was carried out during the period from May to October 1998 to determine the effect of fermented sawdust swine manure application (SSM) on the herbage production of Japanese millet and soil properties in the Cheju brown volcanic ash soil. The randomized block design (T1 : basic chemical fertilizer, N 200 kg/ha + $P_2O_5\;300 kg/ha+K_2O$ 200kg/ha ; T2 : 1/2 basic chemical fertilizer, N $100+P_2O_5\;150+K_2O$ 100kg/ha; T3 : 1/2 basic SSM, N 100kg/ha, T4:basic SSM, N 200kg/ha; T5:2 times basic SSM, N 400 kg/ha ; T6:4 times basic SSM, N 800 kg/ha) was used. At the same application level of nitrogen 200kg/ha, the application of $100\%$ chemical fertilizer (T1) had significantly lower dry matter yield than that of $50\%$ chemical fertilizer and $50\%$ SSM (T2) or $100\%$ SSM (T4)(p<0.01). Dry matter yield increased with an increase of SSM application to N 400kg/ha level but decreased at N 800 kg/ha level. P, K and Ca contents of Japanese millet tended towards to decrease with an increase of SSM level. The application of chemical fertilizer lowered P and K content of Japanese millet in comparison with that of SSM (p<0.05). pH, available phosphorus. exchangeable potassium, Ca and Mg content of soil studied showed a significant increase with an increase of SSM application level (p<0.05). However, at the same application level of N 200kg/ha, there was statistically no significant difference between chemical fertilizer and SSM in those contents of soil after experiment. The bacterial number of soil among microbial population increased with an increase of SSM level, in June, 1998 (p<0.05), but there was no regular tendency, in October. The rate of bacteria to fungus in soil had a tendency to decrease with an increase of SSM level. In conclusion, it is recommended to use N 400kg/ha of SSM or N 100 kg/ha of chemical fertilizer+N 100 kg/ha of SSM for Japanese millet.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.81-88
• /
• 2008

The study was conducted to investigate the effects of DM (dry matter) content and split application of liquid swine manure (LSM) on productivity of rye and subsequent soil quality on the pasture of Livestock Policy Division, Jeju Special Self-Governing Province. The experiment was done between November, 2005 and June 2006, using split plot design. Treatments were 2 main plots (7.0 and 1.6% DM LSM) and 2 subplots (basal fertilizer 100% and basal fertilizer 50%+top dressing 50%). Application of 7.0% DM LSM resulted in significant increase in DM yield and plant length of rye compared with 1.6% DM LSM (p<0.05). Crude protein content of rye was significantly higher in split application(basal fertilizer 50%+ top dressing 50%) than in basal fertilizer 100% (p<0.05). No significant difference in macro and micro mineral contents of rye or in subsequent soil quality was found by application of LSM. Mean P content (0.16%) of rye appeared to be lower than proper P level $(0.2{\sim}0.4%)$ of grass crop. The pH (5.5), OM (13.3%), available $P_2O_5$ (47.6 mg/kg) and Ca (2.75cmole/kg) content of the pasture soil studied were lower, compared with those of cultivated soil. Results show that the application of a 7.5% DM liquid swine manure increases the productivity of rye compared with a 1.6% DM liquid swine manure, meanwhile the property of pasture soil was not influenced by application of LSM.