• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.224-232
• /
• 2006

The paper proposes the artificial neural network(ANN) sensorless control of induction motor drive with adaptive fuzzy logic controller(AFLC). Also, this paper proposes the speed control of induction motor using AFC and estimation of speed using ANN controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The proposed control algorithm is applied to induction motor drive system controlled AFLC and him controller. And this paper is proposed the results to verify the effectiveness of the AFLC and ANN controller.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.131-134
• /
• 2014

PMSM(Permanent Magnet Synchronous Motor)은 가공기, 로봇, 공장 자동화 등 현재까지도 산업 시스템 전반에 널리 쓰이고 있으며, 그에 대한 연구도 활발히 진행되고 있다. 하지만 PMSM에 부하를 인가하거나 혹은 기계 몸체와의 결합 과정에서 기구부가 가지고 있는 고유진동 주파수에 의해 동력 전달 부분에 있어 기계계의 응답 특성은 불안정해지고, 떨림 현상이 발생된다. 본 논문에서는 PMSM을 이용한 회전 운동 시스템에서 출력되는 전류에 기구부가 가지고 있는 특정 영역의 고유진동 주파수를 제거한 전류를 적응 노치필터를 통해 내보낸다. 그 결과 기계부의 떨림 현상을 제거하고, 안정적인 제어 시스템을 제안한다. 이 제어알고리즘을 가상실험으로 필터 통과 전과 후의 결과를 비교 및 분석하도록 한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.2
• /
• pp.125-130
• /
• 2001

This paper presents an indirect field-oriented (IFO) induction motor position servo drives which uses the model following adaptive controller with the artificial neural network(ANN)-based rotor resistance estimator. The model reference adaptive system(MRAS)-based 2-layer ANN estimates the rotor resistance on-line and a linear model-following position controller is designed by using the estimated the rotor resistance value. At the end, a fuzzy logic system(FLS) is added to make the position controller robust to the external disturbances and the parameter variations. The simulation results show the effectiveness of the proposed method.

• ETRI Journal
• /
• v.14 no.2
• /
• pp.120-127
• /
• 1992

슬리브내에서 페룰을 통해 광섬유의 정렬이 이루어지는 광커넥터의 대부분의 접속구조에서 각 구성품간의 어긋남 비정렬요인이 중복되어 나타나게 되므로 접속손실이 매우 큰 영향을 받고 있다. 이러한 접속손실의 향상을 위해 선진 외국에서는 각 구성품의 정밀도 향상과 함께 구성품의 저손실화 조립연구도 수행하고 있다. 본 연구에서는 광섬유 출사면에서의 최대 광도부분을 회전조정하여 최소영역에서 두 광섬유가 정렬, 접속되게 하는 저손실화 조립 장치 개발과 관련하여, 임의로 조립된 상태와 본 연구에서 제안한 적응 제어 알고리즘 (Adaptive Control Algorithm)을 이용하여 광Intensity의 최대부분을 회전조정한 상태와의 삽입손실의 통계적 분포를 비교.분석하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.75-84
• /
• 2021

In this paper, we propose an adaptive concurrency control scheme to reduce conflicts and working time in the cooperative work in mixed reality. To this ends, we first classified the goals, tasks and ownerships of the cooperative work. Then, the classified relationships are mapped according to their temporal and hierarchical relationships of shared object manipulation in the cooperative work. The proposed system provides adaptive concurrency controls of the shared object according to temporal orders of the sub-goals. With the proposed scheme, a participant is enable to move and rotate a shared object although another already has an ownership of the shared object in a specific order of the sub-goal. Thus, the proposed system provides adaptive and realistic cooperative working environment. We conducted a user study of the proposed scheme. The proposed system could reduce conflicts and working times comparing to conventional approaches.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.55-58
• /
• 2001

기존에 MPEG-1, 2나 H.261/263 등에 사용되고있는 움직임 예측 방법은 블록 기반의 코딩 방식으로 단순히 영상의 움직임을 선형 모델로 간주하고 영상을 일정한 크기의 사각형으로 나누어, 각 사각형이 어느 곳으로 이동하는지를 추정하는 방식이었다. 그러나 이러한 방식은 블록 당 하나의 움직임 벡터만으로 처리하기 때문에 블록 내의 복잡한 움직임은 추정할 수 없을 뿐만 아니라, 보다 일반적인 움직임인 회전, 뒤틀림, 확대, 축소 등을 추정할 수 없다. 또한, 영상의 내용에 상관없이 일정한 크기의 블록으로 나누어 처리하기 때문에 주어진 영상에 최적화된 움직임 추정을 수행하기가 어렵다. 특히 저속 비트율에서는 이러한 점들이 크게 부각된다. 이러한 점들을 극복하기 위해서 여기에서는 삼각형 메쉬를 이용한 공간 변환 방법을 이용하였다. 여기에 영상을 영상에 따라 적응적으로 분해하여 처리할 수 있는 웨이브렛 패킷 부호화를 사용하여 에너지가 많고 적음에 따라 초기 제어점의 격자를 조절하여 좀 더 우수한 성능을 얻을 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.122-129
• /
• 2008

The direct torque control method of an inverter fed squirrel cage typed induction motor using fuzzy logic controller has been proposed. This method is suitable for the traction which requires a fast torque response during the star-up and step change. The fuzzy control algorithm based upon the control principles of conventional DSC(Direct Self Controller) is developed. The fuzzy algorithm is tarried out by defuzzification strategy of the fuzzy output extracted from the possibility distribution of an inferred fuzzy control rule. The flux and torque of an induction motor are estimated by the dynamic model of the rotor flux field-oriented scheme which has decoupling characteristics and excellent dynamic response over a wide speed range. The proposed controller shows a good dynamic response. Moreover, since the fuzzy controller possesses highly adaptive capability, the performance of fuzzy controller is quite robust and insensitive to the motor parameters and change of operation conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.79-82
• /
• 1997

The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting forces. However it has not been reported that indirect measurement of the cutting forces from the current of the feed motor at rest is possible. The cutting force normal to the machined surface influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. In this paper, empirical approach was conducted to resolve the problem. Also parametric adaptive and fuzzy logic control strategies are applied to the force regulation problem. As a result, the current is shown to be related to the accumulation of the infinitesimal rotation of the motor, and besides the unpredictable behavior of the current is shown to be caused by the relationship. Subsequently the relationship between the current and the cutting force is identified, and it is presented that control of machined surface using the current of the feed motor at rest is possible.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2196-2198
• /
• 2002

Fuzzy controller design consists of intuition, and any other information about how to control system, into a set of rules. These rules can then be applied to the system. It is very important to decide parameters of IF-THEN rules. Because Fuzzy controller can make more adequate force to the plant by means of parameter optimization, which is accomplished by learning procedure. In this paper, we apply adaptive fuzzy controller designed to the Rotary Inverted Pendulum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.885-890
• /
• 2002

Turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently the study of turbo compressor applied super high speed motor and drive, removing gearbox made its size small and mechanical friction loss minimum. In this study we tried to develope variable super high speed motor controller, compressor controller and MMI controller under one DSP based systems for 1500Hp, 70,000rpm direct drive Turbo compressor. It have to do unitification of each controller"s hardware and software. The result of study is applied to a 150Hp direct turbo compressor and makes it goods.oods.