• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.66-73
• /
• 1998

This paper deals with the combustion characteristics of flue gas in infared mobile heaters. The experimental work has been performed to obtain the concentration levels and combustion characteristics of flue gas with varying chamber size and room temperature. The experimental results showed that oxygen depletion sensor device was operated at the oxygen concentration level of $18.3\%$ for all the chamber size. The combustion characteristics of oxygen and carbon dioxide show a linearity After 10 minutes the combustion property of carbon monoxide occurs at random without a level of oxygen and carbon dioxide in closed space of the heater. In these results, it is very important to prevent incomplete combustion through a sufficient ventilation, and accident prevention with a reduction of the oxygen and diffusion of toxic carbon monoxide.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.315-320
• /
• 2006

This paper describes stress analysis and fatigue limit evaluation of plate with V-notch and hole-notch by lock-in infrared thermography. Temperature variation of a specimen under cyclic loading is negatively proportional to the sum of principle stress change and the surface temperature measured by infrared camera is calculated to the stress of notch specimens, based on thermoelastic equation. And also, fatigue limitation can be evaluated by the change of intrinsic energy dissipation. Fatigue limitation of two notch specimens is evaluated as 164 MPa and 185 MPa, respectively and the stress measured by Lock-in infrared Thermography show good agreement within 10% error.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.2
• /
• pp.19-28
• /
• 2018

In this paper, we studied on the sampling of ocean meteorological data to analyze signature of naval ships. The newest ocean meteorological data, that was quality controled by the Korea Meteorological Administration(KMA), was collected. Outliers were removed from the data by setting the usable range of data. After that, the data size was reduced through the random sampling method, taking geopolitical significance and effective area of buoy, for probabilistic analysis. Moreover, the sample sizes were set at 100, 200, and 400 by considering the population size and a 95% confidence level. The final sample was obtained using the two-dimensional stratified sampling method based on highly correlated water temperature and air temperature. The sum of the squared errors and the confidence interval was calculated to compare the result of sampling. As a result, this study proposed reasonable sample size for infra­red signature analysis of naval ships.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.571-575
• /
• 2016

Photo responsive polymer(PRP) is well known for its photo deformation under UV light, and goes back to its original shape in visible light due to the photoisomerization of the azobenzene inside the PRP. In this paper, dynamic study of the vibration in PRP is discussed. In order to predict photo-deformation of the PRP a multiscale modeling is introduced which covers quantum level photo excitation, microscopic morphology, and macroscopic deformation of the PRP. A simple 1D beam model is introduced to model dynamic bending behavior of the PRP. Through fast Fourious transformation analysis, we identify that vibration frequency of the PRP can be controlled by light polarization angle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1028-1036
• /
• 2018

KARI plans to launch Korea Pathfinder Lunar Orbiter (KPLO) to the Moon by December 2020 for the first step of the Korea Lunar Exploration Project. This orbiter will be launched to obtain lunar exploration technologies and science data in advance before launching a main orbiter and a lunar probe. This paper describes the verification of thermal design for the orbiter. It is exposed to more extreme thermal environment than that of low Earth orbit satellite due to the heavy infrared emission of the Moon. Accordingly, a thermal design considering this environment is needed to maintain the temperature of payloads and components equipped in the orbiter within operating temperature range in all orbits. We performed the thermal analysis for Earth-Moon transfer orbit, lunar mission orbit and lunar eclipse required for thermal design verification of the lunar orbiter. As a result, this thermal design met the design requirements.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.113-119
• /
• 2013

In this paper, n order to degrade of diagnosis of power supply by using Poincare map and fractal dimension with temperature measured by infrared camera. we review the characteristic of temperature variation according to pattern variation of power supply in chemical industry complex. As a simulation results we can be realized the characteristic behaviors of nonlinear dynamics in the poincare mal and fractal dimension. In the future verification method requires through additional research.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.52-62
• /
• 1995

We developed a two-dimensional numerical simulator which can analyze the electrical as well as optical characteristics and evaluate the detection performances of self-signal processing infrared detectors. It solves the poisson equation and the electron, hole current continuity equations including the optical generation and recombination models. To speed up convergency rate. the Newton algorithm is used. Automatic triangular grid generator make it easy to simulate the devices with the various read-out geometries. This simulator can show the variation of spatial resolution which is caused by the transit velocity and transit time dispersion in bifurcate and horn geometries respectively. Also, we calculated the responsivity, noise, and detectivity in respect of the applied electric field and background field-of-view. The results obtained from simulation correspond to those of experiments, and it is verified that horn read-out geometry has the superior spatial resolution and detection performance to bifurcate geometry.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.482-489
• /
• 1985

The substituted quinolinium salts of pentachlorooxomolybdate (V) have been synthesized and characterized by means of the investigation of elemental analysis, infrared spectra, electron spectra, electric conductivity. The results of elemental analysis were well coincided with the theoretical value and all prepared salts were mononuclear complexes. The complexes were binary univalent electrolytes and analyzed d-d transition and charge transfer transition.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.97-100
• /
• 2002

PVDF를 전장하에서 용융결정화 하는 경우에 전장의 세기가 증가할수록 전기적으로 불활성인 $\alpha$-결정의 핵생성속도는 지연되는 반면에 전기적으로 활성을 갖는 ν-결정의 핵생성은 빨라지는 것으로 Stein 연구그룹이 일찍이 보고한 바 있다. [1,2] 그러나 실제로 PVDF를 용응 결정화하는 경우에는 결정화온도가 그다지 낮지 않는 경우에는 $\alpha$-결정과 ν-결정이 혼재되어 나타나기 때문에 외부 전장하리서의 용융결정화시에 외부전장의 세기가 $\alpha$-결정과 ν-결정의 핵생성속도 및 성장속도에 미치는 영향을 분리하여 해석한 논문은 거의 없다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1113-1116
• /
• 2004

This paper presents the method for analyzing surface temperature of Electric incoming Apparatus. For the experiment, the surface temperature of electric power apparatus was measured and analyzed by using a infrared thermal imaging system. Surface Discharges(SD) have very complex characteristics of discharge patterns, therefore it requires the development of precise analysis methods. recently, studies on infrared thermal imaging system are carried out to analyze temperature distribution of power equipments through condition diagnosis and to diagnose the degradation of power equipments. The changes in suface temperature was measured by using the infrared thermal imaging system under hot line condition. The system was set up based on the diagnostic method of the electric incoming apparatus.