• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.11-22
• /
• 1987

A plane buoyant jet discharged vertically upward into a crossflow is analyzed by numerical solution of the governing equations of continuity, momentum and constituent transport. The turbulent transport is modelled by the Prandtl's mixing length theory. In the numerical solution procedure, the governing equations are transformed by stream function and vorticity transport, non-dimensionalyzed by discharge velocity, slot width, and parameters representing flow characteristics, and solved by Gauss-Seidel iteration method with successive underrelaxation. The numerical experiments were performed for the region of established flow of buoyant jet in the range of discharge densimetric Froude number of 4 to 32 and in the range of velocity ratio of 8 to 15, which is the ratio of discharge velocity to crossflow velocity. Variations of velocities and temperatures, flow patterns and vorticity patterns of receiving water due to buoyant jet were investigated. Also investigated are the effects of velocity ratio and discharge densimetric Froude number on the trajectories of buoyant jet. Computed are velocities, temperatures and local densimetric Froude numbers along the trajectory of the buoyant jet. Spreading rate and dispersion ratio were analyzed in terms of discharge densimetric Froude number, local densimetric Froude number and distance from the source along the jet trajectory. It was noted that the similarity law holds in both the profiles of velocity and temperatures across the jet trajectory and the integral type analysis of Gaussian distribution is applicable.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.275-288
• /
• 1999

To understand the effects of ocean-dumping of organic wastes on bacteria, bacterial abundance and production, and hydrolytic activities of aminopeptidase (AMPase) and ${\beta}$-glucosidase (${\beta}$-GLCase) were measured 5 times in the euphotic zone of the dumping and non-dumping areas of the East Sea from April 1996 to September 1997. Comparing the depth-integrated values of phytoplankton biomass and bacterial parameters over the euphotic zone of dumping area with those of non-dumping area, we found that activities of ${\beta}$-GLCase in the oceanic dumping area were always higher than those in the oceanic non-dumping area. Also, thymidine-based bacterial production always correlated significantly with leucine-based bacterial production in dumping area (balanced growth), but not in non-dumping area (unbalanced growth). These results seem to be bacterial responses to continuous dumping of organic matter into the dumping area. Further, a relationship between bacterial abundance and production was significant in dumping area, but insignificant in non-dumping area, indicating that control mechanisms of bacterial abundance were different in two areas. Relationships between other bacterial parameters varied with areas and seasons, suggesting that bacteria might be regulated by different factors in spring and summer. Further studies are required to test whether these seasonal variabilities of regulating factor are associated with changes in temperature, temperature-related phenomena, or characteristics of wastes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1214-1218
• /
• 2007

댐 하류로 탁수를 선택적으로 배제하기 위해서는 방류 탁수가 하류에 미치는 영향을 정확히 예측할 수 있는 하천 탁도 예측 및 관리시스템 구축이 필요하다. 낙동강과 반변천의 합류부에서의 이차원적인 혼합에 관한 수치해석 결과는 완전혼합을 가정하는 일차원 수질모델링의 초기 입력자료에 사용됨으로써 낙동강 본류 전체구간의 탁도 모의결과의 정확성을 높이는 데 사용될 수 있다. 본 연구는 낙동강의 중상류에 위치한 반변천 합류부에 평면 이차원 비정상 수치모형인 KU-RLMS 모형을 적용하여 탁도 변화 특성을 규명할 목적으로 수행하였다. KU-RLMS 모형은 하천 및 저수지의 국부적인 수리, 수질, 유사이동 해석을 위해 개발된 평면 이차원 비정상 수치모형이다. 직사각형 격자를 사용하는 유한차분법의 단점을 보완하기 위해, 수심적분된 2차원 연속방정식, 운동량방정식, 이송확산방정식을 불규칙한 경계를 현실적으로 모사할 수 있는 직교곡선 좌표계로 변환한 방정식을 사용한다. 이 모형은 흐름, 농도, 지형변화를 조합하여 계산할 수 있는 모형으로서 점착성 및 비점착성 유사의 이동을 모의할 수 있다. 수치모형 적용을 위한 현황분석으로 안동 및 임하 조정지댐의 방류량, 안동 수위관측소의 수위, 법흥교 및 포진교 지점의 탁도 자료를 분석하였다. 이송확산모형의 보정을 위해, 안동대교 지점의 탁도 횡분포 측정 자료를 사용하여 확산계수에 대한 매개변수 추정 및 검증을 수행하였다. 또한, 안동조정지댐과 임하조정지댐의 방류량 및 방류탁도을 고려하여 수치모의조건을 결정하였으며, 각 조건에 대한 탁도 변화 특성을 분석하였다.된 주변국이 될 수밖에 없을 것이다. 21세기 문화산업에서 우리가 판단하게 될 디자인의 가치는 계몽의 원리에 대한 '역사성'과 '현재성'의 변증법에 달려있는 것이며, 새로운 철학, 새로운 문명, 새로운 세계를 열어가는 것이다.r$ (地理志)에는 추현리와 이미 외리를 언급하면서 상주의 자기제작의 위상을 짐작하는 기록이 언급되면서 전국의 상품의 절반을 담당하고 있었음을 알 수 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 상주가 8곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.4
• /
• pp.204-210
• /
• 1998

This paper presents the development of the probability density function applicable for wave heights (peak-to-trough excursions) in finite water depth including shallow water depth. The probability distribution applicable to wave heights of a non-Gaussian random process is derived based on the concept of the maximum entropy method. When wave heights are limited by breaking wave heights (or water depth) and only first and second moments of wave heights are given, the probability density function developed is closed form and expressed in terms of wave parameters such as $H_m$(mean wave height), $H_{rms}$(root-mean-square wave height), $H_b$(breaking wave height). When higher than third moment of wave heights are given, it is necessary to solve the system of nonlinear integral equations numerically using Newton-Raphson method to obtain the parameters of probability density function which is maximizing the entropy function. The probability density function thusly derived agrees very well with the histogram of wave heights in finite water depth obtained during storm. The probability density function of wave heights developed using maximum entropy method appears to be useful in estimating extreme values and statistical properties of wave heights for the design of coastal structures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.140-145
• /
• 2018

This paper deals with the dynamical analysis of a two-point mooring vessel under surge excitations. The characteristics of nonlinear behaviors are investigated completely including bifurcation and limit cycle according to particular input parameter changes. The strong nonlinearity of the mooring system is mainly caused by linear and cubic terms of restoring force. The numerical simulation is performed based on the fourth order Runge-Kutta algorithm. The bifurcation diagram and several instability phenomena are observed clearly by varying amplitudes as well as frequencies of surge excitations. Stable periodic solutions, called the periodic windows, can be obtained in succession between chaotic clouds of dots in case of frequency ${\omega}=0.4rad/s$. In addition, the chaotic region is unexpectedly increased when external forcing amplitude exceeds 1.0 with the angular frequency of ${\omega}=0.7rad/s$. Compared to the cases for ${\omega}=0.4$, 0.7rad/s, the region of chaotic behavior becomes more fragile than in the case of ${\omega}=1.0rad/s$. Finally, various types of steady states including sub-harmonic motion, limit cycle, and symmetry breaking phenomenon are observed in the two-point mooring system at each parameter value.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.371-380
• /
• 2017

The risk-targeted seismic design concept was first included in ASCE/SEI 7-10 to address problems related to the uniform-hazard based seismic concept that has been constructed without explicitly considering probabilistic uncertainties in the collapse capacities of structures. However, this concept is not yet reflected to the current Korean building code(KBC) because of insufficient strong earthquake data occurred at the Korean peninsula and little information on the collapse capacities of structures. This study evaluates the risk-targeted seismic performance of steel ordinary concentrically braced frames(OCBFs). To do this, the collapse capacities of prototype steel OCBFs are assessed with various analysis parameters including building locations, building heights and soil conditions. The seismic hazard curves are developed using an empirical spectral shape prediction model that is capable of reflecting the characteristics of earthquake records. The collapse probabilities of the prototype steel OCBFs located at the Korean major cities are then evaluated using the risk integral concept. As a result, analysis parameters considerably influence the collapse probabilities of steel OCBFs. The collapse probabilities of taller steel OCBFs exceed the target seismic risk of 1 percent in 50 years, which the introduction of the height limitation of steel OCBFs into the future KBC should be considered.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.92-92
• /
• 2017

본 연구에서는 수치모델을 이용하여 대하천서 발생되는 조류의 공간적 농도 분포를 예측하였고, 현장실험을 통해 모델을 검증하였다. 국내하천은 다수의 지류가 본류로 유입됨에 따라 오염물질의 생산과 공급이 지속적으로 발생하고, 하천의 유로연장과 하폭에 비해 수심이 낮은 지형학적 특성을 지닌다. 따라서 지류 유입 이후 발생되는 조류의 거동 특성을 분석하기 위해 수심 적분된 2차원 이송-확산 모델을 사용하였다. 광합성 성장을 이루는 조류의 성장속도 계산을 위해 영양염류, 수온, 일사량과 수심 등을 변수로 하는 성장속도 함수들을 위의 모델과 결합하였다. 본 연구의 대상구간은 낙동강과 금호강 합류부를 포함한 강정고령보 하류 약 9.2 km 구간으로 모델 검증을 위한 현장실험을 수행하였다. 2차원 이송-확산 모델의 입력 값인 유속 및 수심을 계산하는 수리동역학 모델 검증을 위해 미국 Sontek사의 M9을 이용하여 낙동강과 금호강 각각 32개, 12개 측선에 대하여 수리량을 측정하였다. 수리량 측정결과, 금호강과 낙동강의 평균 유량은 각각 $240m^3/s$, $60m^3/s$로 측정되었고 측정된 유량을 모델의 상류단 경계조건으로 사용하여 측정 유속 및 수심과 유사한 결과를 모델로부터 취득할 수 있었다. 조류 농도 측정을 위해 독일 bbe사의 AlgaeTorch 10을 사용하였으며, 수리량 측정과 동일한 측선서 총 조류 세포수(cells/ml)를 측정하였다. 농도 측정결과, 하류로 내려감에 따라 조류의 농도가 증가하는 경향이 나타났고 금호강 합류 후 최대농도는 측정구간 최하류 우안서 4,460 cells/ml로 나타났다. 주 흐름이 발생하는 하천 중앙부에 비해 유속이 느린 하안서 상대적으로 높은 농도가 측정되었으며, 이와 같은 경향은 하류로 내려감에 따라 강하게 나타났다. 측정된 조류 농도를 이용한 2차원 이송-확산 모델 검증결과, 합류부 최상류 측선서 MAPE = 10.5 %의 최대오차가 발생하였고 최하류 측선서 MAPE = 6.7 %의 최소오차가 발생하였다. 인과 질소와 같은 영양염류의 농도가 높고 횡 방향 수온 분포가 균일한 대상구간의 특성상 영양염류 함수와 수온 함수로부터 계산된 성장속도 가중치 범위는 각각 0.8~1.0, 0.91~1.09로 공간적 변동성이 크게 나타나지 않은 반면, 수심을 변수로 하는 일사량 함수의 성장속도 가중치 범위는 0.05~1.00으로 상대적으로 매우 높은 공간적 변동성이 나타났다. 수심이 4 m 이하인 하천 양안서 0.8 이상의 가중치가 나타났으며, 수심이 7 m 이상인 하천 중앙서 0.4 이하의 가중치가 나타났다. 본 연구의 수치모의 결과, 수리동역학 모델로부터 계산된 수심이 모델 결과 값에 큰 영향을 미치는 것으로 판단된다.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.393-400
• /
• 2021

Body weight of livestock is a crucial indicator for assessing feed requirements and nutritional status. This study was performed to estimate the body weight of Korean cattle (Hanwoo) using body volume determined from three-dimensional (3-D) image. A TOF camera with a resolution of 640×480 pixels, a frame rate of 44 fps and a field of view of 47°(H)×37°(V) was used to capture the 3-D images for Hanwoo. A grid image of the body was obtained through preprocessing such as separating the body from background and removing outliers from the obtained 3-D image. The body volume was determined by numerical integration using depth information to individual grid. The coefficient of determination for a linear regression model of body weight and body volume for calibration dataset was 0.8725. On the other hand, the coefficient of determination was 0.9083 in a multiple regression model for estimating body weight, in which the age of Hanwoo was added to the body volume as an explanatory variable. Mean absolute percentage error and root mean square error in the multiple regression model to estimate the body weight for validation dataset were 8.2% and 24.5kg, respectively. The performance of the regression model for weight estimation was improved and the effort required for estimating body weight could be reduced as the body volume of Hanwoo was used. From these results obtained, it was concluded that the body volume determined from 3-D of Hanwoo could be used as an effective variable for estimating body weight.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.63-74
• /
• 2008

Site response analyses were performed based on equivalent linear technique using the local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depth to bedrock for 125 sites collected in Korean Peninsula. From the results of site response analyses, 2-parameters site classification system based on the combination of mean shear wave velocity of soil and depth to bedrock was newly recommended for regions of shallow bedrock depth in Korea. First, as the borders of bedrock depth (H) for site classification were determined as 10m and 20m, the soil sites were divided into 3 classes as $H_1$, $H_2$ and $H_3$ sites. And then, the 3 site classes were subdivided into 7 classes based on the mean shear wave velocity of soil ($V_{s,soil}$). The feasibility of new site classification system was verified and the representative site coefficients ($F_a$ and $F_v$) and design response spectrum were suggested by analyzing uniform trend and dispersion of site coefficients for each site class. The suggested site coefficients and the regression curves present the nonlinear characteristics of soils according to the change of rock outcrop acceleration with uniform trend effectively. From the comparison between the mean values of response spectrum which was acquired from the site response analysis and the suggested design response spectrum, there was a little difference in some of site classes and it was verified to adjust the integration interval to make it more suitable for the site condition in Korea.

• Geotechnical Engineering
• /
• v.2 no.1
• /
• pp.27-44
• /
• 1986

The measured soil data are analyzed to the descriptive statistics and classified into the four models of uncorrelated-normal (UNNO), uncorrelated-nonnormal (VNNN), correlatedonnormal(CONN), and correlated-nonnormal(CONN) . This paper presents the comparisons of reliability index and check points using the advanced first-order second-moment method with respect to the four models as well as BASIC Program. A sin91e-mode Performance function is consisted of the basic design variables of bearing capacity and settlements on shallow foundations and input the above analyzed soil informations. The main conclusions obtained in this study are summarized as follows: 1. In the bearing capacity mode, cohesion and bearing-capacity factors by C-U test are accepted for normal and lognormal distribution, respectively, and negatively low correlated to each other. Since the reliability index of the CONN model is the lowest one of the four model, which could be recommended a reliability.based design, whereas the other model might overestimate the geotechnical conditions. 2. In the case of settlements mode, the virgin compression ratio and preccnsolidation pressure are fitted for normal and lognormal distribution, respectively. Constraining settlements to the lower ones computed by deterministic method, The CONN model is the lowest reliability of the four models.