• Korean journal of applied entomology
• /
• v.14 no.3 s.24
• /
• pp.97-109
• /
• 1975

In an attempt to develop an effective integrated system of controlling blast disease of rice caused by Pyricularia oryzae Cav., the possibility of minimizing the disease incidence by proper application of fertilizers has been investigated. Thus the effect of silicate, nitrogen, phosphorus and potassium fertilizers on the development of blast disease as well as the correlation between the rice varieties an4 strains of P. oryzae were studied. The experiments were made in 1971 and 1973 by artificial inoculation and under natural development of the blast disease on rice plants. The results obtained are summarized as follows. 1. Application of silicate fertilizer resulted in the increase of silicate as well as total sugar and potassium content but decrease of total nitrogen and phosphorus in tile leaf blades of rice plants. 2. The ratios of total C/total N. $ SiO_2/total$ N, and $K_2O/total$ N in leaf blades of rice plants increased by the application of silicate fertilizers. There was high level of negative correlation between the ratios mentioned above and the incidence of rice blast disease. 3. Application of silicate fertilizer reduced the incidence of rice blast disease. 4. The over dressing of nitrogen fertilizer resulted in the increase of total nitrogen and decrease of silicate and total sugar content in leaf blades, thus disposing the rice plants more susceptible to blast disease. 5. Over dressing of phosphorus fertilizer resulted in the increase of both total nitrogen and Phosphorus, and decrease of silicate content in the leaf blades inducing the rice plants to become more susceptible to blast disease. 6. Increased dressing of potash resulted in the increase of silicate content and $K_2O/total$ N ratio but decrease of total nitrogen content in leaf blades. When potassium content is low in the leaf blades of rice plants, the additional dressing of potash to rice plant contributed to the increase of resistance to blast disease. However, there was no significant correlation between additional potassium application and the resistance to blast disease when the potassium content is already high in the leaf blades. 7. When four rice varieties were artificially inoculated with three strains of P. oryzae, the incidence of blast disease was most severe on Pungok, least severe on Jinheung and moderate on Pungkwang and Paltal varieties. 8. Disease incidence was most severe on the second leaf from top and less sever on top and there leaf regardless of the fertilizer application when 5-6 leaf stage rice seedlings of four rice varieties were artificially inoculated with three strains of P. oryzae. 9. The pathogenicity of three strains of P. oryzae was in the order of $P_1,\;P_2,\;and\;P_3$ in their virulence when inoculated to Jinheung, Paltal, Pungkwang varieties but not with Pungok. The interaction between strains of P. oryzae and rice varieties was significant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.321-322
• /
• 2012

의료용 방사선 장비는 초기의 아날로그 방식의 필름 및 카세트에서 진보되어 현재는 디지털 방식의 DR (Digital Radiography)이 널리 사용되며 그에 관한 연구개발이 활발히 진행되고 있다. DR은 크게 간접방식과 직접방식의 두 분류로 나눌 수 있는데, 간접방식은 X선을 흡수하면 가시광선으로 전환하는 형광체(Scintillator)를 사용하여 X선을 가시광선으로 전환하고, 이를 Photodiode와 같은 광소자로 전기적 신호로 변환하여 방사선을 검출하는 방식을 말하며, 직접 방식은 X선을 흡수하면 전기적 신호를 발생 시키는 광도전체(Photoconductor)를 사용하여 광도전체 양단 전극에 고전압을 인가한 형태를 취하고 있는 가운데, X선이 조사되면 일차적으로 광도전체 내부에서 전자-전공쌍(Electron-hole pair)이 생성된다. 이들은 광도전체 양단의 인가되어 있는 전기장에 의해 전자는 +극으로, 전공은 -극으로 이동하여 아래에 위치한 Active matrix array을 통해 방사선을 검출하는 방식이다. 본 연구에서는 직접방식 X-ray 검출기에서 활용되는 a-Se을 ITO (Indium Thin oxide) glass 상단에 Thermal evaporation증착을 이용하여 두께 $50{\mu}m$, 33 넓이로 증착 시킨 다음, a-Se상단에 Sputtering증착을 이용하여 ITO를 11 cm, 22 cm, $2.7{\times}2.7cm$ 넓이로 증착시켜 상하부의 ITO를 Electrode로 이용하여 직접방식의 X-ray검출기 샘플을 제작하였다. 제작 과정 중 a-Se의 Thermal evaporation증착 시, 저진공 $310^{-3}_{Torr}$, 고진공 $2.210^{-5}_{Torr}$에서 보트의 가열 온도를 두 번의 스텝으로 나누어 증착 시켰다. 첫 번째 스텝 $250^{\circ}C$, 두 번째 스텝은 $260^{\circ}C$의 조건으로 증착하여 보트 내의 a-Se을 남기지 않고 전량을 소모할 수 있었으며, 스텝간의 온도차를 $10^{\circ}C$로 제어하여 균일한 박막을 형성 할 수 있었다. Sputtering증착 시, 저진공 $2.510^{-3}$, 고진공 $310^{-5}$에서 Ar, $O_2$를 사용하여 100 Sec간 플라즈마를 생성시켜 ITO를 증착하였다. 제작된 방사선 각각의 검출기 샘플 양단의 ITO에 500V의 전압을 인가하고, 진단 방사선 범위의 70 kVp, 100 mA, 0.03 sec 조건으로 X-ray를 조사시켜 ITO넓이에 따른 민감도(Sensitivity)와 암전류(Dark current)를 측정하였다. 측정결과 민감도(Sensitivity)는 X-ray샘플의 두께에 따른 $1V/{\mu}m$ 기준 시, 증착된 ITO의 넓이가 11 cm부터 22 cm, $2.7{\times}2.7cm$까지 각각 $7.610nC/cm^2$, $8.169nC/cm^2$, $6.769nC/cm^2$로 22 cm 넓이의 샘플이 가장 높은 민감도를 나타내었으나, 암전류(Dark current)는 $1.68nA/cm^2$, $3.132nA/cm^2$, $5.117nA/cm^2$로 11 cm 넓이의 샘플이 가장 낮은 값을 나타내었다. 이러한 데이터를 SNR (Signal to Noise Ratio)로 합산 하였을 시 104.359 ($1{\times}1$), 60.376($2{\times}2$), 30.621 ($2.7{\times}2.7$)로 11 cm 샘플이 신호 대 별 가장 우수한 효율을 나타냄을 알 수 있었다. 따라서 ITO박막의 면적이 클수록 민감도는 우수하나 그에 따른 암전류의 증가로 효율이 떨어짐을 검증 할 수 있었으며, 이는 ITO면적이 넓어짐에 따른 저항의 증가로 암전류에 영향을 끼침을 할 수 있었다. 본 연구를 통해 a-Se의 ITO 박막 면적에 따른 전기적 특성을 검증할 수 있었다.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.988-996
• /
• 1995

CuInSe$_2$this films as a light absorber layer were fabricated by vacuum evaporation using In$_2$Se$_3$and Cu$_2$Se precursors and their properties were analyzed. Indium selenide films of 0.5${\mu}{\textrm}{m}$ thickness were first deposited by vacuum evaporation of In$_2$Se$_3$ on a Corning 7059 glass substrate. The films deposited at suscepor temperature of 40$0^{\circ}C$ showed a flat surface morphology with densely Packed grain structure. CuInSe$_2$films directly formed by evaporating Cu$_2$Se on the predeposited In$_2$Se$_2$films also showed a very flat surface when the susceptor temperature was $700^{\circ}C$. Cu$_2$Se, a second phase in the CuInSe$_2$film, was removed by evaporating additional In$_2$Se$_3$on the CuInSe$_2$film at $700^{\circ}C$. The grain size of 1.2${\mu}{\textrm}{m}$ thick CuInSe$_2$, film was about 2${\mu}{\textrm}{m}$ and the film had a (112) preferred orientation. As the amount of deposited In$_2$Se$_3$increased, the electrical resistivity of CuInSe$_2$films increased because of the decrease of hole concentration. But the optical band gap was almost constant at the value of 1.04eV, The CuInSe$_2$film grown on a Mo/glass substrate had a similar smooth microstructure compared to that on a glass substrate. A solar cell with ZnO/CdS/CuInSe$_2$/Mo structure may be realized based on the above CuInSe$_2$films.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.163-177
• /
• 2019

This study aims to review the relations between the dyeing conditions (i.e., dye concentration, addition amounts of salt and alkali, and dyeing temperature) and dyeing properties and color fastness to light for identifying the optimal dyeing conditions when dyed regenerated woody fibers were obtained through the defibration of waste medium density fiberboard (MDF) using reactive Red H-E3B (Bis-monochlorotriazine (MCT)/MCT type) and reactive Red RB133% (Bis-MCT/Vinyl sulphone type). The dyeing yield (K/S) obtained using two types of reactive dyes increased as the dye concentration increased by 1-10% (on the weight of fiber (OWF)). In addition, the K/S of H-E3B was higher than that of RB133% irrespective of the dye concentration. The color difference of H-E3B after ultraviolet (UV) radiation was lower than that of RB133%, denoting good resistance to discoloration by UV. As the amount of sodium sulfate increased, the color difference and K/S also increased, and the adequate salt content was determined to be 50-70 g/L. Further, the color difference and K/S significantly increased only the addition of 2 g/L of sodium carbonate; however, almost no difference was observed when more than 2 g/L of sodium carbonate was added. The addition amount of sodium carbonate was adequate 5-10 g/L to dyeing the fiber and the pH at this addition level was 10. The dyeing yield of H-E3B increased when the dyeing temperature increased; however, it subsequently decreased after the dyeing temperature became $80^{\circ}C$. The dyeing yield of RB133% was almost the same up to $60-70^{\circ}C$ but declined subsequently. Thus, the adequate temperatures were $80^{\circ}C$ and $60^{\circ}C$ for H-E3B and RB133%, respectively. If the waste MDF woody fiber was dyed under the aforementioned optimal conditions, dyed regenerated woody fiber can be obtained having the following colors: 1.5 to 2.0R with the H-E3B dye and 9.6 to 10.0 PR with RB133%.

• Solar Energy
• /
• v.10 no.3
• /
• pp.60-65
• /
• 1990

[ $n^+-p^+$ ] InP homojunction solar cells were fabricated by thermal diffusion of sulphur into a $p^+$-InP wafer($p=4{\times}10^{18}cm^{-3}$), and a SiO film($600{\AA}$ thick) was coated on the $n^+$ layer as an antireflection(AR) coating by an e-beam evaporator. The volume of the cells were $5{\times}5{\times}0.3mm^3$. The front contact grids of the cells with 16 finger pattern of which width and space were $20{\mu}m$ and $300{\mu}m$ respectively, were formed by photo-lithography technique. The junction depth of sulphur were as shallow as about 0.4r m We found out the fabricated solar cells that, with increasing the diffusion time, short circuit current densities($J_{sc}$), series resistances($R_s$) and energy conversion efficiencies(${\eta}$) were increased. The cells show good spectral responses in the region of $5,000-9,000{\AA}$. The short circuit current density, the open circuit voltage( $V_{oc}$), the fill factor(F.F) and the energy conversion efficiency of the cell were $13.16mA/cm^2$, 0.38V, 53.74% and 10.1% respectively.

• Korean journal of food and cookery science
• /
• v.11 no.5
• /
• pp.479-486
• /
• 1995

The reological properties of doughs blended with cereal flours were investigated in the study. The doughs were prepared of wheat flours mixed with 10％, 20%, 30% and 40% ratio of rice flour, waxy-rice flour, brown-rice flour and soybean flour. Amylogram, farinogram, extensogram and SEM were used to measured thier special properties with graphs and photos. The results were obtained as followes; 1. Wheat dough formation after fermantation, showed "stringing" structure of small starch granules on the SEM photo. But the large starch granules contributed little to the structure formation in rice flours dough, and played relatively a little role in the structure formation of blended doughs of waxy-rice, brown-rice and soy- bean flours. 2. The absorption of flour composited rice and brown-rice, was lower than that of the control by Farinograph. It was decreased the farinograph absorption with the increase of replacement ratio of cereal flours. Dough development time of cereal blended flours decreased, but that time of waxy-rice and brown-rice were very similiar. Farinograph stability of rice, waxy-rice, brown-rice and soybean blended flours, had shorter than that of wheat-flour. 3. The results showed that cereal blended flours decreased the resistance to extention (elasticity) without affecting the extensibility in fermented dough by Extensograph. 4. The gelatinization temperature of wheat, rice, waxy-rice, and brown-rice were 55.0$^{\circ}C$, 64.0$^{\circ}C$, 58.0$^{\circ}C$ and 61.0$^{\circ}C$. But that of all cereal blended flours showed 58.0$^{\circ}C$ except 20% or 30% soybean blended flours. According to the amylogram, each maximum viscosity of rice flour and wheat flour was 1760 B.U.,760 B.U.. Soybean composite flours had significantly lowe. amylograph peak viscosity (300 B.U.) than that of the other composite flours (450 B.U.-1100 B.U.).

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ] was deposited by DC magnetron sputtering on glass surface under various sputtering parameters such as discharge power($0.6{\sim}5.2\;kW$, substrate temperature($R.T{\sim}350^{\circ}C$), Ar and $O_2$ flow ratio with $0{\sim}50\;sccm$($Ar+O_2$ 90 sccm) and about 1 mtorr of pressure. TiO-N thin film was prepared under same sputtering conditions for $TiO_2$ thin film except flow ratio($Ar+O_2+N_2$ 90 sccm). The sheet resistance of thin films deposited under these parameters was measured to analyze electronic characteristic and thin film's thickness(${\alpha}$-step), surface roughness(AFM) and formation construction(FE-SEM, XRD) were also measured to draw optimal sputtering parameters. In order to evaluate photo-activity of thin film($TiO_2$, TiO-N) made in optimal parameters for removal of pollutants, toluene among VOCs and Suncion Yellow among reactive dyes were chosen to probe organic compounds for photo-degradation. It was shown that the photo-catalytic thin films had a significant photo-activation for the chosen contaminants and especially TiO-N thin film showed maximum efficiency of 33% for toluene(5 ppm) removal in visible-light range.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.295-301
• /
• 1992

An alkaline protease producing microorganism was isolated from soil and identified as Streptomyces griseus HC-1141. The optimum pH and temperature for the purified enzyme activity were 8.0 and $60^{\circ}C$, respectively. The enzyme was relatively stable in the pH range of 7.0-9.0 and at the temperature below $60^{\circ}C$. The activity of purified enzyme was inhibited by $Hg^{2+}$, $Cu^{2+}$, $Zn^{2+}$, $Ba^{2+}$ and $Fe^{2+}$, whereas activated by $Mn^{2+}$ and $Ca^{2+}$. $\varepsilon$-Amino caproic acid, 2,4-dinitrophenol and iodine did not show inhibitory effect on the activity of alkaline protease, but p-chloromercuribenzoic acid, ethylendiaminetetraacetic acid showed inhibitory effect on the enzyme activity. These result suggested that the protease was metalloenzyme, and require a reactive SH group for the activity. The reaction of this enzyme follows typical Michaelis-Menten kinetics with the $K_m$ value of $2.229{\times}10^{-4}$M and the $V_{max}$ of $46.08 {\mu}$g/min for casein. The activation energy for the alkaline protease calculated by Arrhenius equation was 3.643 kcal/mol. This enzyme hydrolyzed casein more rapidly than the hemoglobin and egg albumin.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.146-151
• /
• 2007

Resistant starch (RS) content, paste viscosity, water solubility and absorption index, bulk density, color, compression force, and bowl life of Goami flakes manufactured by extrusion process were determined to evaluate Goami (high fiber rice) as a food material. Various extrusion process conditions included barrel temperature (90, 110, $130^{\circ}C$) and moisture content (50, 55%). RS content in the extruded pellet and defatted flake ranged from $8.00{\sim}8.56%$ and $6.57{\sim}9.53%$ respectively. RS content increased as moisture increased from 50% to 55%. Peak viscosity, trough viscosity, final viscosity, and setback viscosity of the extruded pellet and defatted flake decreased with steeping for 1 hr, and the breakdown viscosity significantly increased. The water solubility and absorption index increased in the flake compared to Goami and extruded pellet. The water solubility index of the extruded pellet was lower than that of Goami, while its water absorption index was higher than Goami. The bulk density of the flake ranged from $0.35{\sim}0.44$ g/mL. The bowl life of the flake was $12.4{\sim}19.4$ min, which was longer than commercial breakfast cereals on the market.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.116-121
• /
• 2006

'Seoln', a new variety of oyster mushroom was developed by Mushroom Research Institute, Gyonggi Province Agricultural Research and Extension Services in 2005. It was bred with mating between monokaryotic strains isolated from KME35124 and $F{\cdot}X3$. The major characteristics of the mushroom was shown a lot of primordia, the gray-colored and bunch pileus. The optimum temperature for the mycelial growth was around $26{\sim}30^{\circ}C$ and that for the primordia and growth of fruit-body was around $10{\sim}15^{\circ}C$. Incubation period was required around 25 days with bottle culture and about 23 days in Poly Prophylene(P.P) plastic bag culture. The yield was shown high by 138.8g/bottle and 250.9%/P.P bag.