• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.257-257
• /
• 2010

최근 저항 변화 메모리는 종래의 비휘발성 기억소자인 Flash memory보다 access time(writing)이 105배 이상 빠르고, DRAM과 같이 2~5 V 이하의 낮은 전압 특성 및 간단한 제조 공정 등으로 차세대 비휘발성 메모리 소자로 주목 받고 있지만, 여전히 소자의 Endurance 및 Retention 특성 등의 신뢰성 문제를 해결해야 할 과제로 안고 있다. 이러한 문제점들을 해결하기 위해 페로브스카이트계 산화물 또는 이원 산화물 등의 다양한 저항 변화 물질에 대한 연구가 진행되고 있다. 하지만, 현재 주로 연구되고 있는 금속 산화물계 물질들은 그 제조 공정상 산소에 의한 다수의 산소 디펙트 형성과 제작 시 쉽게 발생할 수 있는 표면 오염의 문제점을 안고 있다. 본 연구는 기존의 금속 산화물계 박막의 제조 공정에서 발생하는 문제점을 해결하기 위해 질화물계 박막을 저항변화 물질로 도입함으로써, 기존의 저항 변화 물질의 장점인 간단한 공정 및 저전압/고속 동작 특성을 동일하게 유지 할 뿐 아니라, 그 제조 공정상 발생하는 다수의 산소 디펙트와 표면 오염의 문제를 해결함으로써, 보다 고효율을 가지며 재현성이 우수한 메모리 소자를 구현 하고자 한다 [1, 2]. 본 연구를 위해 Pt/AlN/Pt 구조의 Metal/Insulator/Metal(MIM) 저항 변화 메모리를 제작 하였다. 최적의 저항 변화 특성 조건을 확인하기 위해 70~200nm까지 두께 구분과 N2 가스 분위기의 열처리 온도를 $200{\sim}600^{\circ}C$까지 진행 하였다. 본 소자의 저항 변화 특성 실험은 Keithley 4200-SCS을 이용하여 진행 하였다. 실험 결과, AlN의 최적의 두께 및 열처리 온도 조건은 130nm/$500^{\circ}C$였으며, 안정적인 unipolar 저항 변화 특성을 확인 활 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.27-31
• /
• 2008

Due to the increasing need for miniaturization of electronic device, embedded resistor technology using thick film resistance paste to embed resistors currently mounted on the board thus effectively reducing board size, is being extensively researched. In this research, thick film resistor paste having $0.35{\sim}4k{\Omega}/sq$ range of resistivity were fabricated using mixtures of carbon black and epoxy resin. In order to adjust the TCR (temperature coefficient resistivity), TCR modifiers such as Ni-Cr alloy, $SiO_2$ powder were added and were able to improve on TCR value with $100ppm/^{\circ}C$. Finally embedded resistor board using thick film resistance paste were fabricated. Stable resistivity value and reliability results were achieved.

• Korean journal of applied entomology
• /
• v.34 no.2
• /
• pp.89-94
• /
• 1995

Resistance mechanism of organophosphorus insecticides (OPs) in the spiraea aphid, whose populations were originated from several apple orchards where various OPs were frequently sprayed, was investigated. For Wonju population to which insecticides were not sprayed, resistance ratios (BRs) for pirimicarb, phosphamidon, and demeton S-methyl re 49, 31, and 5, respectively. However, for Yesan population to which OPs were sprayed 5 times, RRs for pirimicarb, phosphamidn, and dementon were 830, 536, and 204, respectively. The esterase activities of Wonju and Yesean populations increased by 44.5 and 92.0% compare to that of Kwagju population. R/S a values (S clone Kwangju population; R clone: Iechon opulation) for acetylcholinesterase (AChE) inhibition (${I}_{50}$) by pirimicarb and phosphamidon were 299.2 and 186.0, respectively. Our results indicate that increase of esterase activity and reduction of AChE sensitivity seemed to contribute insecticide resistance of the spiraea aphid.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.455-462
• /
• 2006

In this paper, we used the electrical resistivity survey as a simple and reasonable technique to evaluate the effectiveness of grouting. And, a mechanism was also analyzed to understand how the electrical resistivity is affected by the loss of fine material in the core of a dam. From this mechanism, it was confirmed that electrical resistivity value of the damage section may be up or down depending on the survey conditions. This result seems to be contrary to the previous study that electrical resistivity of the damage zone become alway low. To clarify what was investigated, the electrical resistivity before and after grouting was compared and analyzed. As the result, it was concluded that grouting effectiveness was successfully assessed by electrical resistivity survey.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2000

Co-fired resistors for high frequency MCM-C (Multi Chip Module-Cofired) were fabricated and measured their RF properties from DC to 6 GHz. LTCC (Low Temperature Co-fired Ceramics) substrates with 8 layers were used as the substrates. Resisters and electrodes were printed on the 7th layer and connected to the top layer by via holes. Deviation from DC resistance of the resistors was resulted from the resister pastes, resistor size, and via length. From the experimental results, the suitable equivalent circuit model was adopted with resistor, transmission line, capacitor, and inductor. The characteristic impedance $Z_{o}$ of the transmission line from the equivalent circuit can explain the RF behavior of the buried resistor according to the structural variation.

• Korean journal of applied entomology
• /
• v.9 no.1
• /
• pp.15-20
• /
• 1970

An investigation was carried out to know the relationship between resistance of rice varieties to blast disease and the chemical components, especially total nitrogen and total sugars, in the rice plants. The results sic summarized as follow: 1) The nitrogen contents in the resistant variety were less than those of susceptible one, and sugar contents were reversed. Accordingly, the C/N ratio in the resistant variety was higher than that obtained by susceptible one. 2) The free amino acids contents, especially, Glutamine, Valine, Leusine and Iso-leusine, in the resistant varieties were more than those of the susceptible varieties. 3) The starch synthetic activity of rice leaves in the resistant varieties was higher than that of susceptible one in fructose and glucose solutions, but it was reversed in sucrose solution. 4) When more nitrogen was dressed, the total nitrogen content of rice leaves was increased than the ordinary dressing. The rate of increase in nitrogen content in resistant variety was lower than those of the susceptible. The total sugar content of rice plants dressed more nitrogen was decreased at early tillering stage, but increased at maximum tillering stage. It seemed that the rate of increase of total sugar in the resistant variety was higher than those of the susceptible.

• Korean journal of applied entomology
• /
• v.33 no.3
• /
• pp.166-172
• /
• 1994

This study was conducted to investigate the resistance development and cross-res~stance of house fly (Musco dornestica L.) selected with chlorpyrifos, dichlorvos and permethrin for 11 generations to various p u p s of insectiodes. The resistance ratio (RR) of the chlorpyrifos-selected (Q), the d~chlorvos- selected (&) a d the permethrin-selected (R,) stmlns were 42 0. 38 and 187 tlrnes in female. and 42.0, 4 1 and 16.4 time; in male from the susceptible strain, respectively. The Rc strain showed highest cross-resistance to permethlin among the insectic~des tested: RR=7.5 and 9.6 tunes in female and male, respectively, whereas negatively correlated cross-resistance to propoxur was observed. High cross-res~atance to chlorpyrifos were produced for female (RR= 13.3) and male (RR=15.9) of Rd strain, and female (RR=8.7) and male (RR= 9 7) of R, strain. respectively

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.463-470
• /
• 2014

In this paper, calculation of towing force required to tow the ship and experiments to verify its appropriacy are discussed. Friction, wind and wave-making resistance of vessel are considered to calculate towing force of specified vessel. Propeller resistance is also reflected and it is assumed that the propellers are locked. Node analysis to estimate additional resistance on towline is applied. Total towing force could be obtained by adding the ship's resistance and towline resistance. Experiments with training ship SAE YU DAL was executed to check the effectiveness of calculation methods and some comparison between experiments and calculation results was also done. From the comparative analysis, we confirmed that towing speed is primary terms in the calculation of towing force and propeller resistance is a major elements of ship's resistance with the increasing of towing speed. We can see that additional resistance induced by yawing of ship during towing have to be considered for total tow resistance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.365-365
• /
• 2012

스퍼터된 a축 성장된 산화아연 박막의 전기적 및 구조적 특성의 DC 파워에 대한 영향을 c 축 성장된 산화아연 박막과의 비교를 통해 분석하였다. 1~103 ${\Omega}{\cdot}cm$의 낮은 비저항을 갖는 파워를 갖는 조건과 106~108 ${\Omega}{\cdot}cm$의 높은 비저항을 갖는 파워를 갖는 조건에 대한 분석을 진행하였다. 각 조건에 따른 XRD 분석을 통해 낮은 비저항을 갖는 파워를 갖는 조건의 경우 (100) 성장 방향을 강하게 나타내었으나, 높은 비저항을 갖는 파워를 갖는 조건의 경우 약한 (002) 성장 방향을 나타내었다. EDS를 이용한 분석시 낮은 비저항을 갖는 파워의 경우 상대적 으로 oxygen rich 특성을 나타내었다. 이번 연구를 통해 비저항 등 다양한 조건에 따라 결정 성장 방향이 다름을 확인하였으며, 이에 대한 분석을 통해 산화아연 박막의 성장된 조건에 따 라 다양한 전자소자에의 응용 및 분석이 필요함을 확인하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1996

동시 소성으로 LCR network을 구성하기 위한90$0^{\circ}C$ 소성용 Ru계 저항체를 제조하 였다. 동시 소성에 요구되는 최종온도에 이르기 위해서는 90$0^{\circ}C$에서 용융되는 유리상을 제 조하는 것이 필수적이다. 이 90$0^{\circ}C$소결용 저항 페이스트는 가장 낮은 용융온도를 갖는 PbO 의 양을 감소시키고 알루미나와 실리카의 양을 증가시켜 제조하였다. 본 연구에서는 ferrite 로 이루어진 inductor 그린쉬트 위에 ruthenate 저항체를 인쇄하여 동시소성한후 그 복합체 의 저항 특서에대하여 고찰하였다. PbO의 양이 감소될수록 복합 기판의 면적저항은 증가 되었고 inductor 기판 위에 잔류되는 저항페이스트의 양도 함께 증가하였다.