• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.483-489
• /
• 2008

Masonry infill walls are frequently used as interior partitions and exterior walls in low- or middlerise RC buildings In the structural design and assessment of structural behaviors of buildings, the infill walls are usually treated as non-structural elements and they are ignored in analytical models. In this study, seismic behaviors of RC frame with/without masonry infill walls were investigated. To this end, the infill walls were modeled as equivalent diagonal struts. Based on analytical results, it has been shown that masonry infill walls can increase the global strength and stiffness of a structure. Accordingly, inter-story drift ratio will be decreased but seismic forces applied to the structure were increased than design seismic load because natural period of the structure was decreased. It is also seen from the analytical results that the inelastic deformation of RC frame with soft story is concentrated on the first story columns and thus, partial damage may have possibility of collapse of system.

• Korean Journal of Ichthyology
• /
• v.30 no.3
• /
• pp.175-180
• /
• 2018

A single bothid specimen (113.9 mm in standard length) was collected by bottom trawl from southern Jejudo Island, Korea. It was easily identified as Kamoharaia megastoma (Kamohara, 1936), based on extremely large mouth. The species is characterized by maxillary extending beyond eyes, three pairs of long curved canines on lower jaw, tip of vomer projecting into mouth cavity, blackish pectoral fin, and blind side without lateral line. We described it as the first record to Korean fish fauna, and proposed the new Korean name, "Keun-ip-dung-geul-neop-chi" for this species.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.104-111
• /
• 2009

To research about the fire spread in Korean apartment house, a full-scale fire test in a four-story apartment was executed. The fire started at the third floor, and originated from overheated cooking oil in the kitchen. The apartment included all combustibles in general house. Through measuring temperature, measuring the concentration of oxygen and observing, we investigated the fire spread inside the apartment house. As a result, we got the data of the time needed for the initiation of fire, the time for fire to spread into each area in the house, and the time required until flash-over was seen. Also we grasped the understanding of the fire spread to the upper floor.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.237-237
• /
• 2022

우리나라 하천 내에 설치된 횡단구조물은 보 35,000개소 이상으로 전국 하천의 0.6 km마다 수공구조물이 위치해 있으며 이로 인해 종적(longitudinal) 연결성에 영향을 미치는 것으로 나타났다. 농어촌연구원의 조사에 따르면 하천 횡단구조물이 설치된 구간에 어도 설치율은 14.9%로 나타났으며 이는 수생태 관점에서 연속성이 매우 열악한 상태임을 확인 할 수 있다. 이에 우리나라 각 부처 국토교통부, 환경부 등에서는 수생태 연속성을 확보하고자하는 노력이 지속되고 있으며 대표적으로 어류의 이동통로인 어도를 설치하거나 기존 어도의 효율을 향상시키기 위하여 개보수 작업을 지속적으로 실시하고 있다. 어도의 기능을 평가하기 위해서는 어도 내의 수리특성을 정확히 파악하는 것이 중요한데 연속적인 구조물로 구성된 어도 내 흐름은 매우 복잡하다. 특히 어도 내 구조물간 상호작용에 의하여 비정상 흐름이 발생하며 구조물 뒤에서는 사수역(dead zone)이 형성된다. 사수역에서 나타나는 와류의 거동은 구조물의 기하학적 특성에 따라 변화한다. 본 연구에서는 2차원 수심적분 수치모형을 활용하였으며 벽면 근처 점성저층의 유속분포을 재현하기 위하여와 점성항에 감쇠함수(damping function)를 고려하였다. 수치모형의 검증을 위해 실내 실험수로의 직선 개수로에서 PIV(particle image velocimetry)를 활용하여 연속적으로 배치된 구조물에 의한 유속자료를 활용하였다. 이 결과는 향후 새로운 어도설계 혹은 기 설치된 어도의 수리학적 기능을 평가하는데 활용이 가능할 것으로 보인다.

• Journal of the Korean Regional Science Association
• /
• v.33 no.3
• /
• pp.21-30
• /
• 2017

The purpose of this study is to analyze the effect of urban characteristics on regional population and to suggest policy implications based on the analysis results. For this purpose, this study used spatial econometrics analysis(SAR, SEM, SAC) using data on 122 eup-myon-dong areas in Incheon Metropolitan City. As a result of the analysis, First, in terms of spatial, population density showed positive (+) effect while employment density has negative (-) effect. Also, the increase in the number of tertiary industries and workers in the industry has a positive (+) effect. Second, in terms of housing, the apartment ratio showed positive (+) effect and the increase of low-rise deteriorated housing has negative (-) effect. Third, the increase in educational facilities and urban parks showed positive (+) effect on population. In conclusion several policy implications for urban management found through this analysis are discussed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.718-725
• /
• 2002

A wall type friction damper is newly Proposed in this paper to improve the performance of R/C framed structures under earthquake loads. Although traditional dampers are usually placed as bracing members, the application ot bracing-type dampers into R/C structures is not as simple as those of steel structures due to the connection between R/C members and dampers and the stress concentration in connection region. Proposed damper is consisted of Teflon-sheet slider and R/C shear wall. The damper can also avoid stress concentration and reduce P-Δ effect. To evaluate the performance of proposed damper, nonlinear dynamic analyses are carried on 10 story and 3 bay R/C structures with numerical model for the damper. It is shown that the damper reduces the inter-story drifts and the time-historic responses; especially the damper prevents from forming plastic hinges on the lower columns.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.5
• /
• pp.509-516
• /
• 2010

In this study a seismic retrofit scheme for the reinforced concrete moment framed structures was investigated using steel bracing and moment frames. The analysis model structure is a 3-story 3-bay moment frame structure designed only for gravity load. The stress/strain concentration in brace-RC frame connection was investigated using finite element analysis. To prevent premature joint failure, steel moment frames were placed inside of middle bay of the RC frame. Two types of braces, steel braces and buckling restrained braces(BRBs), were used for retrofit, and the ductility and the strength of the structure before and after the retrofit were compared using nonlinear static and dynamic analyses. According to the analysis results, the strength and ductility of the structure retrofitted by the moment frames and braces increased significantly. The added steel frame did not contribute significantly to the increase of lateral strength mainly because the size is relatively small.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.2
• /
• pp.69-77
• /
• 2009

The experiment was carried out to investigate lateral retrofitting effects by FRP and BRB (Buckling-Restrained Brace) for beam-column elements. These results were utilized to establish an analytical model using commercial nonlinear analysis software, PERFORM3D. Concrete and steel analytical models previously proposed by several scholars were adopted for this analytical study. A proposed analysis model showed reasonable accuracy compared with the test results on the beam-column elements strengthened FRP sheets and BRB, as well as with the non-strengthened element subjected to lateral cyclic loadings. Subsequently, the proposed modeling technique for nonlinear analysis would be helpful for preliminary analyses for retrofitting structures, by enabling engineers to estimate the improved capacity of retrofitted structural elements before performing construction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.23-38
• /
• 2018

Up to now, most of studies on seismic analysis have been limited to analyze buildings and underground structures individually so that the interaction between them could not be analyzed effectively. Thus, in this study, a dynamic analysis was conducted for soil-structure interaction with a complex underground facility composed of a building and an adjacent underground structure constructed on a surface soil and the bed rock ground conditions. Seismic stability was analyzed based on interstory drift ratio and bending stress of structure members. As a result, an underground structure has more effect on a high-rise building than a low-rise building. However the above structures were proved to be favorable for seismic stability. On the other hand, tensile bending stresses exceeded the allowable value at the underground part of the building and the adjacent underground structure so that it turned out that the underground part could be weaker than the above part. Therefore, it is inferred that above and underground structures should be analyzed simultaneously for better prediction of their interaction behavior during seismic analyses because there exist various structures around buildings in big cities.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.2
• /
• pp.121-128
• /
• 2010

The current trends in steel construction involve the use of tapered sections to minimize the use of excess materials to the extent possible, by choosing cross-sections that are as economical as possible abandoning the classical approach of using prismatic members. In addition, snug-tightened connections, especially the end-plate type, have the advantage of fetching less construction costs and shorter assembly times as opposed to fully tightened joints. Although they have many merits, however, snug-tightened bolted end plates are extremely complex in their structural behavior. In this study, an experimental investigation of the snug-tightened flush end-plate connections of tapered beams were conducted. The primary test parameters were the torque for the clamping bolt, the loading pattern, the bolt type and the connection failure type. Using initial stiffness and load-carrying capacity as proposed by Silva et al. and AISC (2003), the moment-rotation curve of a linearly tapered member with a snug-tightened flush end-plate connection was predicted. Moreover, numerical and experimental data for moment-rotation curves were compared.