• 제목/요약/키워드: 저점도형 고성능 감수제

검색결과 7건 처리시간 0.017초

혼화재료를 치환한 시멘트 계열 재료에 대한 저점도형 고성능 감수제의 유동 성능 평가 (Fluidity Performance Evaluation of Low Viscosity Typed Superplasticizer for Cement-Based Materials Incorporating Supplementary Cementitious Materials)

  • 손배근;이향선;이유정;한동엽
    • 한국건축시공학회지
    • /
    • 제19권3호
    • /
    • pp.219-228
    • /
    • 2019
  • 본 연구의 목적은 저점도형 고성능 감수제가 혼화재료를 포함하는 시멘트 계열 재료의 유동성 및 레올로지 특성에 미치는 영향을 분석하여 기초적인 정보를 제공하는 것이다. 이에 플라이애시, 고로슬래그, 실리카흄을 치환한 시멘트 페이스트와 모르타르에 대하여 일반적인 고성능 감수제와 저점도형 고성능 감수제를 사용하여 실험을 실시하였다. 실험 결과 저점도형 고성능 감수제는 소성점도에 있어서 일반형 고성능 감수제보다 크게 저감시키는 것으로 나타났다. 이러한 결과를 바탕으로 본 연구가 향후 저점도형 고성능 감수제를 사용하는 데에 기초적인 데이터를 제공할 것으로 기대한다.

산업부산물 치환 및 저점도형 고성능 감수제를 사용한 시멘트 계열 재료의 점도저하 방안 연구 (A Study on Viscosity Reducing of Cement-Based Materials by Replacing Byproducts and Adding Low-Viscosity Type HRWR)

  • 손배근;한동엽
    • 한국건설순환자원학회논문집
    • /
    • 제5권4호
    • /
    • pp.353-358
    • /
    • 2017
  • 본 연구의 목적은 고성능 시멘트계열 재료의 점성을 감소시키는 것에 대한 기초적인 정보를 제공하는 것이다. 레올로지적 측면에서 시멘트 계열 재료의 유동성을 결정하는 것은 항복응력과 소성점도이다. 물결합재비가 낮고 분체비율이 높은 고성능 시멘트계열 재료의 경우, 고성능 감수제로는 항복응력을 줄일 수는 있으나 점성을 낮추는 것이 어렵다. 따라서 이 연구에서는 시멘트계열 재료의 소성점도를 줄이기 위한 목적으로 두가지 방법, 즉, 분말상태의 적절한 조합 및 저점도형 고성능 감수제의 사용을 제시하였다. 첫째, 다양한 산업부산물을 치환하여 석탄재 원분과 폐석회석 분말이 점성저하에 효과가 있음을 밝혔으며 저점도형 고성능 감수제가 일반형 고성능 감수제에 비해 시멘트 페이스트의 점도를 낮추는 것을 확인하였다. 따라서 본 연구의 결과를 바탕으로 다양한 방법의 시멘트계열 재료의 점도를 낮추는 기초적인 방법을 제공할 것으로 기대한다.

저점도형 고성능 감수제가 다양한 혼화재 종류 및 치환량 조건에서 고성능 시멘트 페이스트의 레올로지 성능에 미치는 영향 분석 (Analysis of the influence of low viscosity typed high range water reducer on rheological properties high performance cement paste depending on SCM types and contents)

  • 전종운;손배근;이향선;한동엽
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 추계 학술논문 발표대회
    • /
    • pp.46-47
    • /
    • 2018
  • High performance concrete with low water-to-cement ratio has been widely used with increased demand of high rising buildings and huge scaled structures. Additionally, for high performance concrete, various SCMs are replaced to improve its performance from fresh state to hardened state. With the drawback of increased viscosity of the concrete mixture for high performance concrete, low-viscosity typed high range water reducer is the relatively new admixture. Therefore, as a goal of the research, under using various SCMs with wide range of content, the performance of low-viscosity typed high range water reducer was evaluated. Especially, in this research, the influence of low-viscosity typed high range water reducer on rheological properties including plastic viscosity and yield stress were assessed. As a result of the research, it is expected to provide a fundamental information of low -viscosity typed high ranged water reducer on high performance concrete with various conditions of SCMs.

  • PDF

저점도형 감수제 및 고성능 감수제의 사용에 따른 시멘트 페이스트 성능 분석 (Performance Analysis of Cement Paste Including Generic and Low-viscosity Type High Range Water Reducer)

  • 손배근;한동엽
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.32-33
    • /
    • 2017
  • In order to improve the flow performance of high performance concrete, use of high performance water reducing agent and low viscosity type water reducing agent is a study of suitable range of use due to side effects. in this study, we aimed at reducing viscosity and yield value using high performance water reducing agent and low viscosity type water reducing agent, and this was evaluated using a rheometer. as a result of analysis of viscosity and yield value, it was found that the high performance water reducing agent has higher reduction effect than the low viscosity type water reducing agent. however, the larger the viscosity lowering effect is, the lower the usable range is, compared to general high performance water reducing agents, and it was found that sufficient consideration for this judgment of appropriate quantity is necessary.

  • PDF

저점도형 감수제의 성능 분석 (Performance Analysis of Low-viscosity type Superplasticizer)

  • 한동엽
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.35-36
    • /
    • 2016
  • Recently, with the increasing demand of high performance of concrete, the mix design of concrete mixture has became low water-to-binder ratio with high binder content. To compensate these trend of mix design, high range water reducer, or superplascizier has been invented to achieve high flowable concrete. Although this superplasticizer provides favorable workability based on its dispersing action on the components of concrete mixture, it has an limitation of decreasing viscosity of the mixture, and thus it is difficult to secure sufficient workability for high performance concrete mixtures with high binder content. To improve the workability of concrete with high viscosity, recently, low-viscosity type superplasticizer was introduced, and in this research, a fundamental properties of low-viscosity type superplasticizer is evaluated.

  • PDF

시멘트 페이스트의 유동성 개선방안 연구 (A Study on Improving Fluidity of Cement Paste)

  • 한동엽
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.171-172
    • /
    • 2017
  • In order to meet the high performance of the concrete, the viscosity increases with water binder ratio and amount of powder. because of these problems, we use high performance water reducing agent and low viscosity water reducing agent, but side effects may occur when using large amount of water reducing agent. Therefore, in this research, in order to increase the viscosity, I would like to analyze the change in viscosity and flow characteristics of paste by utilizing fly ash and lung limestone which are generally thrown away without using high performance water reducing agent.

  • PDF

시멘트 계열 재료의 점도 저하용 혼화재료로서 폐석회석 미분말의 사용 가능성 분석 (Feasibility Analysis of Wasted Limestone Powder as a Viscosity Reducing Material for Cement Based Materials)

  • 이향선;전종운;손배근;한동엽
    • 한국건설순환자원학회논문집
    • /
    • 제6권2호
    • /
    • pp.123-129
    • /
    • 2018
  • 본 연구의 목적은 고강도 및 일반강도 영역의 물-결합재 비에 대해 시멘트계열 재료의 점도를 감소시키기는 것에 대한 정보를 제공하는 것이다. 시멘트 계열 재료의 유동성을 결정하는 것은 물-결합재 비 및 치환재료와 감수제가 있다. 이를 레올로지적으로 보았을 때 물-결합재 비가 낮은 경우 항복치와 점도를 낮추며 감수제의 경우 항복치 저감에 영향을 주지만 점도 저하에는 한계가 있다. 따라서 이 연구에서는 시멘트 계열 재료의 점도를 낮추기 위해 물-결합재 비에 따른 폐석회석 치환에 대한 점도 저하 가능성을 분석하였다. 실험 결과, 폐석회석을 치환하였을 경우 점도 저하의 효과가 있었으며 이는 시멘트 계열 재료의 점도 제어에 유의미한 결과를 주는 것으로 판단되었다. 따라서 본 연구의 결과는 시멘트 계열 재료의 점도를 낮추는 방안으로써 분체 치환에 의한 방안의 기초적인 자료가 될 것으로 생각된다.