• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.1
• /
• pp.11-24
• /
• 1979

To characterize elastic and plastic chilling injury, rice seedlings grown at 28/$16^{\circ}C$ day/night temp. under 20K lux (13hrs.) in a phytotron were subjected to a 11/$6^{\circ}C$, 20K lux condition for 2, 4, 6 or 8 days at 1, 2, 3, 4 or 5th leaf-stage, respectively, followed by further growth under 28/$16^{\circ}C$condition till 30th day after seeding. Japonica variety Jinheung and Chulwon No.1 survived almost 100% without any significant , discoloration and death of leaves due to chilling even under the chilling of 8 days at all seedling ages tested. Tongil and Yushin, varieties from Indica x Japonica cross, showed increasing discoloration of leaves and death of plants with increase in chilling intensity. The longest chilling duration shown seedling death less than 5% was 4, 6, 1, 4, 8 days for Tongil, and 6, 6, 1, 2, 2, days for Yushin at 1, 2, 3, 5th leaf-stage, respectively. The degree of discoloration and death of leaves or suppression of height growth was not explicitly related to seedling death or the dry weight reduction. The degree of seedling death or dry weight reduction could differentiate chilling tolerance of varieties and seedling ages, but somewhat differently. Reduction in dry weight due to chilling occurred even without any visible injury or seedling death. These suggest that both the degree of seedling death and reduction in dry weight should be considered in the test of varieties for chilling tolerance. Combined evaluation of seedling death and dry weight reduction indicated the most susceptible seedling age to chilling injury to be 1 to 2nd leaf-stage for Jinheung, 2 to 3rd leaf-stage for Chulwon No.1, 3rd leaf- stage for Tongil and Yushin, respectively.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.326-332
• /
• 2011

The growth and bolting characteristics of spring Chinese cabbage cultivars at two night-time temperature treatments such as $5^{\circ}C$ and $10^{\circ}C$ during seedling stage were investigated to establish a safe environmental management strategy for raising seedlings. The low night-time temperature treatments were applied at 5, 10, and 15 days after sawing and the treatment durations were 5, 10, and 15 days in each of treatment beginning. The growth of seedlings in all the tested cultivars were linearly reduced as the treatment duration was extended and no symptoms of bolting were found. The reduction rate in seedling growth of 'Chunkwang' reached to 59.3% at most by 15 days of $5^{\circ}C$ treatment when it be compared to that of control. However, no symptoms of bolting were shown in the treatments of two night-time temperatures until the harvest at 90 days after sawing, indicating that the vernalization effect by low night-time temperature could be mitigated by subsequent day-time optimal temperature management. This study showed that the major spring Chinese cabbage cultivars require more ultimate level of low night-time temperature treatment for the vernalization than this study. It is also supposed that the optimal day-time temperature management can reduce or delay the rate of bolting, even if the seedlings were exposed to short-term low temperature below $5^{\circ}C$ during night-time.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.516-520
• /
• 2016

Concentrated liquid detergents have 2~3 times higher surfactant contents [35~45% (w/w)] compared to those of normal type detergents. In general, a single surfactant forms a lyotropic liquid crystal (LC) phase when the concentration is in the region of 30~60% (w/w). Whereas the concentrated liquid detergent at about 40% (w/w) concentration in a mixed surfactant system shows an opaque appearance of gel or LC. In order to meet consumer needs and preference for product appearance, we applied hydrotropes and various surfactants systems in concentrated liquid detergents to obtain an opaque gel-phase and also a clear transparent phase at even below zero $^{\circ}C$ temperature. The more effective hydrotropes for making concentrated liquid detergents are 1,6-hexanediol, adipic acid and dipropylene glycol (DPG) which have two hydrophilic groups in both terminated positions. In order to prepare an excellent concentrated liquid detergent, good hydrotropes alongside secondary type surfactants like LAS and SAS were used. The formation of LC phase of concentrated liquid detergents at about 40% (w/w) concentration could be prevented by the use of both hydrotropes and secondary type surfactants. The result indicate that concentrated detergents having excellent low temperature stability and controlled viscosity can be prepared.

• Electrical & Electronic Materials
• /
• v.6 no.5
• /
• pp.436-445
• /
• 1993

2단계하소법에 의해 낮은 하소온도에서 미세하고도 균일한 PZT분말을 합성하였다. 우선 Zr $O_{2}$와 Ti $O_{2}$ 혼합분말을 1차하소하여 (Z $r_{0.53}$ $Ti_{0.47}$) $O_{3}$(ZTO) 분말을 합성하고 이 ZTO 고용분말에 PbO와 N $b_{2}$ $O_{5}$을 혼합한 후 650-800.deg.C에서 2시간 하소하여 PZT 분말을 합성하였는데 얻어진 분말은 고상반응법에 비해 미세할 뿐만 아니라 XRD 분석결과 710.deg.C의 낮은 하소온도에서도 PZT 단일상을 나타내었다. 2단계하소법에 의해 하소온도를 낮출 수 있는 주된 이유로는 고상반응법에서는 중간생성물인 PbTi $O_{3}$상의 생성이 수반됨으로 850.deg.C 이상 되어야만 안전한 PZT가 생성될 수 있는 점을 들 수 있다. 또 2단계하소법에 의하면 950.deg.C이하의 낮은 소결온도에서도 치밀화가 미루어지는 소결이 가능함을 알 수 있었는데 이와같이 소결온도를 낮출 수 있는 것은 고상반응법에 비해 미세한 PZT 분말을 사용하였기 때문이라 풀이된다.이된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.2
• /
• pp.105-112
• /
• 1994

BaTiO3 의 B-site에 0-0.03 몰 범위의 NiO를 첨가한 Ba1-xSrxTi1-y-wNiyZrwO3-y 유전 체에서 NiO 첨가가 유전특성 및 절연저항의 내환원성에 미치는 영향을 조사하였다. B-site Ni 치환에 의해 a 축의 격자상수는 증가하고 c 축의 격자상수는 감소하여 정방성 c/a가 감 소하였으며 단위격자의 부피는 증가하였다. NiO 첨가에 따라 큐리온도는 저온으로 이동하 였으며 큐리온도의 변화율은 소결분위기에 영향을 받았다. NiO가 첨가되지 않은 조성에서 는 산소분압 109 MPa의 환원분위기 소성에 의해 비정항이 107$\Omega$.cm로 저하되었으나 0.01 몰이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을수 있었던 1011$\Omega$.cm로 저하되었으 나 0.01 몰 이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을 수 있었던 1011$\Omega$.cm 이 상의 비저항을 유지하였다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.04a
• /
• pp.48-50
• /
• 2002

오이의 원산지는 열대지방으로 생육 적온이 25-3$0^{\circ}C$ 정도로 매우 높다. 그러나 사계절이 뚜렷한 국내 기후 특성 상 생육적온 이하의 환경과 이상의 환경을 경험하게 된다. 시설오이는 온실에서 재배되기 때문에 계절에 따라 고온과 저온 스트레스를 받기 쉽다. 이 가운데 환기를 적극적으로 실시하는 여름철과 봄, 가을에는 밀폐된 공간의 특성상 열집적현상으로 환기가 제대로 이루어지지 않아 고온장해를 받는 경우가 많다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.217-218
• /
• 2002

대기환경 중의 오존은 유기용제의 사용 및 차량에서 배출되는 휘발성 방향족 화합물과 오존전구물질(ozone precursors)이 대기 중에서 광화학반응을 통하여 만들어지는 것으로 알려져 있다. 오존은 호흡기계통의 기관지염 및 감기, 현기증과 같은 인체의 건강상에도 매우 나쁜 영향을 초래하고 있어 이에 대한 모니터링이 중요한 과제로 대두되고 있다. 본 연구에서는 고가의 장비가 소요되는 기존의 분석법인 저온농축법과 흡착법을 이용하는 대신에 고체상 미량추출방법 (Solid-Phase Microextraction, 이하 SPME)을 이용하여 GC/MS로 대기 중 오존 VOC를 ppt 수준까지 빠르고 신속하게 분석하는 방법을 확립하였다. (중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.11-16
• /
• 1997

원자로 압력용기강의 제조열처리인 ？칭과 템퍼링 중간에 페라이트와 오스테나이트가 공존하는 영역에서 2상영역열처리를 추가한 후 템퍼링조건을 조정함으로써 파괴인성을 향상시키는 열처리 공정을 개발하였다. 새 열처리공정을 적용하면 기존공정에 비하여 강도는 크게 감소하지 않으면서 충격인성과 연성이 크게 증가하고, 천이온도가 약 2$0^{\circ}C$ 감소하였다. 2상영역열처리를 하면 연한 템퍼드 베이나이트 기지에 비교적 강한 템퍼드 마르텐사이트가 균일하게 분산된 복합조직을 얻을 수 있고, 유효 결정립의 크기가 감소하여 균열진전이 억제되었다. 또한 기존공정의 판상 탄화물 대신 구형 탄화물이 형성되기 때문에 응력집중이 완화되어 파괴저항성이 향상되었다. 그리고 2상 영역열처리후 템퍼링 정도를 낮추면 탄화물 크기가 작아지기 때문에 균열발생이 억제되어 저온 충격인성이 향상되었다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.406-409
• /
• 2004

A blue phosphor(ZnS:Cu) is manufactured by solid state reaction for ACPEL(AC powder EL). The effect of artificial defect on phosphor surface on the ZnO phase conversion and resulting luminescence have been studied. It was found that ZnS:Cu could converse to cubic phase more easily due to the formation of artificial defect on 1st fired phosphor by ball-milling process, resulting in improvement of luminescence of phosphor phosphors under the driven EL condition. We found out an optimized ball-mill condition through considering effect of each ball-mill conditions such as milling time and milling rpm on defect. Also we determined relationship between emission luminescence and phase of phosphor based on analyses of crystal structures of phosphors. A significant improvement above 30% was observed in electroluminescence by the artificial defect on ZnS:Cu phosphors compared to non-treated phosphors.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.4
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.