• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.378-382
• /
• 2006

Clarified orange juice was prepared using different clarification methods including centrifugation, enzyme treatment, ultrafiltration (UF), and combined treatment(CT). Effect of clarification methods as well as other quality parameters were investigated. Clarification was improved with increase in centrifugation speed and by lowering operating temperature. The optimum condition for centrifugation process was $5^{\circ}C$ and 10,000 rpm. UF and CT processes were very effective to produce clarified orange juice. The optimum condition of UF process was $45^{\circ}C$ and 150 kPa considering flux and turbidity CT did not significantly improve the clarification efficiency since most of the clarification was already achieved during UF process. $L^*$-values increased while $a^*$-values decreased significantly after clarification regardless of methods (p<0.05) Considering color, and recovering rate of vitamin C and soluble solids, UF process was superior than the other methods in producing clarified orange juice.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.388-394
• /
• 2017

This study investigated the stability of ethanolic extract from fermented Cirsium setidens Nakai (FCSN) in order to develop functional materials during different storage conditions. We evaluated pectolinarin and pectolinarigenin contents, total phenol content and antioxidant activity (DPPH radical scavenging activity and FRAP assay) of ethanolic extract from FCSN obtained by bioconverison at various temperatures (4, 25 and $50^{\circ}C$) and pHs (4.0, 7.0 and 10.0). Our results show that the pectolinarin, pectolinarigenin, and total phenol contents in ethanolic extract from FCSN were decreased during the storage periods. Moreover, the DPPH radical scavenging activity did not significantly change at $4^{\circ}C$ and $25^{\circ}C$. Pectolinarin and pectolinarigenin contents, total phenol content and DPPH radical scavenging activity of ethanolic extract from FCSN at acidic pH (pH 4.0) and neutral pH (pH 7.0) were higher than those at the alkaline pH range. These results indicate that the optimum storage condition of the ethanolic extract from FCSN was $4^{\circ}C$ and pH 4.0~7.0 range.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.208-215
• /
• 1999

The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.4
• /
• pp.369-374
• /
• 1998

This study was conducted to investiagte influences of cold aged dough on the quality of bagutte. After 2 hours fementing, the dough was divided 2 parts and they were stored in the refrigirated adjusted 1∼-1$^{\circ}C$. The cold aging time was 24, 48 hours respectivley. After 2 hourse fermentation, the dough's pH was 5.45 and 24, 48 hours cold aged dough were 4.99, 4.81. During cold aging, the difference of pH was not significant. The main organic acids in the baguette were lactic acid, acetic acid and malic acid, Among these organic acids, the acetic acid was the largest quantity regardlessly in different fermentation and the cold aging acids, time. Right after baking, the enthalphy of all samples were almost same even thought in different cold aging time, but during different storage periods they showed the difference of retrogradation by the increase of the enthalphy. 24 hours cold aging baguette had the best taste, aroma and texture in bread's score sheet.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.452-458
• /
• 1991

Psychrotrophs producing protease were isolated during ripening periods of Cheddar cheese and one of them containing the highest protease activity was identified as Pseudomonas fluorescens 65. The extracelluar proteolytic enzyme was partially purified from P. fluorescens 65 through the Sephadex G-100 gel filtration. The protease was eluted between 190 ml and 230 ml of elution volume of sodium phosphate buffer. The purified protease showed a single band in SDS-PAGE and its molecular weight was 47,000. The composition of amino acid for the protease was determined and the most abundant amino acids were glutamic acid (14.96%) and serine (13.86%). The optimum temperature and pH for the activity was $45{\sim}50^{\circ}C$ and 6.0, respectively.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.508-512
• /
• 2004

For abutment of dental implants, (Y, Nb)-TZP/Alumina composites were prepared by addition of 10-90 vol% alumina at an interval of 10 vol％ into tetragonal zirconia solid solution which consists of 90.24 mol% Zr $O_2$, 5.31 mol% Y$_2$ $O_3$, and 4.45 mol% Nb$_2$O$\_$5/. Biaxial flexure strength and fracture toughness of composite were optimized by adding 10 vol% alumina, which resulted in 900 MPa and 8.9 MPam$\^$1/2/, respectively. The composite did not undergo low temperature degradation even after autoclave treatment at 200$^{\circ}C$ for 10 h. 65 of (Y, Nb)-TZP/Alumina composite abutments were employed into 40 patients and any adverse reaction, screw loosing, or fracture of abutments was not observed for the span of 2 years, indicating that the ceramic abutments can be safely used for restorations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.867-873
• /
• 2007

Thermal degradation characteristics of polypropylene and polystyrene have been studied in the thermogravimetric(TG) reactor and batch-type microreactor. The dynamic thermogravimetric curve of TG provided a valuable information about pyrolysis temperature. It was found that PS was thermally degraded at lower temperature of $30{\sim}50^{\circ}C$ than PP. It was found that the yield and molecular weight of liquid product in the microreactor were decreased with the increase of reaction temperature and time in the case of PP. The production of styrene monomer was significantly increased by the promotion of depolymerization with the increase of temperature and time. The chain-end scission rate parameters were determined to be 50.0 kcal/mole of PP, 45.2 kcal/mole of PS by the Arrhenius plot.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.513-518
• /
• 2000

Volatile flavor components of Angelica gigas Nakai affected by different storage time and temperature were investigated. The aroma compounds was extracted by a simultaneous distillation and extraction method using a Likens and Nickerson's apparatus. The concentrated extract was analyzed and identified by GC and GC-MS equipped polar and nonpolar column. The yields of volatile concentrates of Angelica gigas Nakai by low temperature storage were larger than those by room temperature storage. The GC patterns of the flavor components of both resembled but the peak area of each flavor compounds was little different. Main volatile flavor components of Angelica gigas Nakai by using polar column were ${\alpha}-pinene$, ${\beta}-pinene$, terpineol, farnesol, cadinene, guaiol, isolongifolene and eudesmol etc. Main volatile flavor components of Angelica gigas Nakai by using nonpolar column were camphene, ${\beta}-pinene$, elemol, eudesmol etc.

• Journal of Bio-Environment Control
• /
• v.3 no.2
• /
• pp.106-118
• /
• 1994

This study was conducted to analyze the effects of fluctuations in temperature, light intensity and soil temperature on the growth of red pepper seedlings in the nonheated plastic houses with various number of layers and in the open field. Relationship between the optimal environment and the growth of seedlings was discussed, and the maximum and minimum outdoor temperatures in Kwangju area from 1941 to 1985 were analyzed. The results obtained were as follows; 1. The minimum temperature in tunnel with quadruple coverings of P. E. film from December 20 to February 25 was decreased to 5$^{\circ}C$ mostly, where the exposure to chilling temperature could not be avoided during this period. The maximum temperature was increased to 33$^{\circ}C$ mostly and 42$^{\circ}C$ in peak, where some ventilation was needed. 2. The diurnal differences of inside temperature, increasing with number of layers, were 16 to 38$^{\circ}C$, while those of outside temperature were 5 to 1$0^{\circ}C$. 3. The cold injury in the quadruple coverings during winter occurred all the times below 12$^{\circ}C$ and as many as 200 times over 3$0^{\circ}C$, while effectiveness of thermal insulation in the multilayered nonheating plastic houses were clearly proved. 4. The inside light intensity was markedly reduced with the increment of layers and the minimum light intensity fallen down below the light compensation point for the growth of red pepper plants regardless of the number of layers. 5. Until 10 a. m., the temperature in the daytime during December 20 to mid - February showed below 10 to 12$^{\circ}C$ which was the limiting temperature for the growth of red pepper seedlings. After 4 p. m., the light intensity was sharply reduced despite of the air temperature kept over 12$^{\circ}C$. Therefore, limiting factors for the growth of red pepper seedlings were the temperature before 10 a. m. and the light intensity after 4 p. m. 6. The minimum soil temperature in quadruple coverings showed around 1$0^{\circ}C$ where the physiological damage for red pepper seedlings might be occurred. 7. The minimum outdoor temperatures from 1941 to 1985 was -19.4$^{\circ}C$, observed in the 5th January.

• Research in Plant Disease
• /
• v.18 no.1
• /
• pp.45-48
• /
• 2012

In early August of 2011, following a prolonged period of cool and moist weather, several trees of boxelder maple (Acer negundo) planted in Mt. Soyo located in Dongducheon, Korea, were found to be heavily damaged by premature defoliation with zonate leaf spot symptoms. Numerous number of cone-shaped, white sporophores (conidia) were observed on lesions of the abaxial leaf surface. The morphological characteristics of conidia are of typical Cristulariella moricola, which was supported by analyzing sequences of internal transcribed spacer region of ribosomal DNA. Pathogenicity of the fungus was proved by artificial inoculation in the condition of relative humidity 100% and $18{\pm}2^{\circ}C$. This is the first report of the occurrence of zonate leaf spot caused by infection of C. moricola on A. negundo in Korea.