• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.15-18
• /
• 2000

• Composites Research
• /
• v.26 no.5
• /
• pp.303-308
• /
• 2013

Carbon fiber (CF) reinforced polypropylene (PP) compositeis was increased to amount consumed. In this study, recycle of composites by recycle times. CF was containing 20%. Mechanical and interfacial propertis of CF/PP was evaluation for number of recycle time. Mechanical assessment of CF/PP was tension, bending, fatigue tension test and izod test method. Interfacial assessment of CF/PP was wettability test and FE-SEM of fracture surface method. Fiber and matrix was changed to recycle time. The more recycle of CF/PP, the more interfacial bonding was decreased. Because fiber and matrix was damaged to thermal damage. And then reinforced CF was shorter than original shape.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.55-61
• /
• 2013

In this study, eco efficiency analysis is performed to analyze Neodymium (Nd) containing permanent magnet recycling process. Life cycle assessment (LCA) and life cycle costing (LCC) are used to apply eco efficiency analysis. In the environmental aspects, global warming potential (GWP) of 1kg permanent magnet is 1.25E + 00 kg $CO_2$ eq. and abiotic resource depletion potential (ADP) is 1.10E - 02 Sb eq. This recycling process costs about 2130 KWR. Environmental efficiency of GWP is at 6.43 and ADP is at 5.32 when compared with vigin metal. Economic efficiency is at 6.74. This study confirms that Nd containing permanent magnet recycling process is sustainable system because of environmental and economical improvement.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.7-14
• /
• 2006

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.1
• /
• pp.115-123
• /
• 2005

In this study, life cycle assessment(LCA) technique was employed to evaluate the environmental impact of material recycling of polyethylene terephthalate(PET) bottle. Life cycle inventory was established based on the data collected from recycling companies in Korea. Simapro 5.0 LCA software and Eco-indicator 95 index were used for the analysis. The biggest impact by the material recycling of PET bottle on the environmental category was the global warming. It is because melting and production of the recycled PET product consume a significant amount of electricity and energy. In the environmental pollution discharge, $CO_2$ emission was the highest, followed by NOx. This is probably due to the use of diesel and gasoline in the consumption of electricity and transportation. All the environmental impact showed (-) value except the ozone layer depletion, which means that the material recycling of PET bottle is environmentally fair. The use of recycled PET product greatly reduced the environmental impact.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.101-111
• /
• 2006

In the present work, life cycle assessments (LCA) of various waste-plastic recycling methods (material recycling, refused derived fuel (RDF), recycling on furnace, and pyrolytic oil production) were carried out to investigate their impacts on the environment. Six types of impacts were considered. While the impact on global warming was found to be significant, the impact on others were negligible. The impact values on the global warming caused by the material recycling, RDF, and the recycling on furnace were negative, which implied that their impacts could be noticeably reduced when waste-plastic are used as an alternative to newly drawn plastics. The pyrolytic oil production, however, showed positive value, which may be due to the carbon dioxide produced during electric power generation. The pyrolytic oil production had the largest impact on the ozone layer destruction, which was due to ozone depleting substances produced from the process itself. These results can be used as a useful data for the enhancement of waste-plastic recycling.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.102-107
• /
• 2017

To estimate the bulk density applying the composition rate for recyclable residential waste, the composition rates by volume and weight basis, the bulk densities of the separated and commingled wastes were investigated four times respectively for recyclable waste of 1,800 kg transported to waste recovery facility. The bulk densities for separated wastes were $379.0kg/m^3$ of glass bottles that is highest and metals, residues, others, cans, plastics in order. The composition rates for each separated waste were changed widely depending on either volume basis or weight basis. The composition rate by weight basis as 40.6% of the glass bottles, 32.6% of the plastics were changed to 60.2% of the plastics and 8.9% of the glass bottles in that by volume basis. The bulk density of the commingled wastes applying the composition rate by volume basis showed the similar value to the measured density than by weight basis. So it was estimated that the composition rate by volume basis was appropriate for determining the bulk density of the commingled recyclable wastes.

• Bulletin of Food Technology
• /
• v.26 no.2
• /
• pp.92-100
• /
• 2013

배추 절임 공정에서 위해 미생물로부터의 안전성 확보를 위한 위생적 세척 처리기술개발로 효율적인 재활용 시스템을 개발하고자 전기분해수를 활용하여 실험하였다. 전기 분해수의 농도는 100 ppm 으로 염수와 전해수의 비율을 1:9, 2:8, 5:5로 20회 반복 실험을 하였다. 그 결과 기존의 절임수 재활용 횟수인 3~5회를 훨씬 초과하여 10회 이상 반복하여도 총균수가 초기에 비해 2 log CFU/g 이상 감소된 결과를 나타내었다. 또한 재활용 처리된 염수의 pH나 산도 또한 초기에 비해 큰 차이를 보이지 않아 기존의 재활용 방법에 비해 효율적인 결과를 나타내었다. 조사되어진 바에 따르면 절임 공정에서 사용되어진 염수의 회수율은 70~80%에 달했으며, 절임공정에서 본 연구에서와 같이 전해수와 사용된 절임수가 1:9 또는 2:8 비율이 효율적일 것으로 판단된다. 재활용 처리되어진 염수로 절인 배추로 김치를 제조하여 관능평가를 한 결과, 기존의 방법으로 만들어진 김치와 큰 차이를 보이지 않아 본 재활용 시스템 방법은 기존의 시스템의 문제점으로 제기되었던 절인 배추의 성상 변화와 김치의 맛의 변화의 문제점을 해결할 수 있을 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.640-647
• /
• 2018

Many harbor structures have been constructed, and some structures are now under construction in Korea, which is a peninsular state and a logistics hub in Northeast Asia. Expansions and extensions of existing harbors are also being planned to meet increasing natural disaster threats. Wave-dissipation concrete blocks are recycled or discarded based on the personal experience of engineers only, and there are no safety checks or criteria. To check the safety of used blocks, material evaluations were done by visual inspection of blocks on the ground and under water and from 20 non-destructive measurements of the rebound hardness test and 3 concrete core samples. Wave-dissipation blocks are sometimes fully or partially damaged in the process of transferring and mounting them or during construction. Therefore, a safety check is essential for recycling blocks with an evaluation of materials while considering the construction phases. To do this, a block was modeled with a 3D finite element method using ADINA, and impact analyses were done according to the transfer, mounting, and construction phases. From the results of the impact analyses and material evaluation, the safety checks and reasonable evaluation of used blocks were examined, and detailed construction methods are proposed. The methods are expected to maximize the reuse of used wave-dissipation blocks from an economical point of view.