• Proceedings of the Korean Society of Radiological Science
• /
• 1994.10a
• /
• pp.105.2-106
• /
• 1994

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.1
• /
• pp.44-53
• /
• 2006

In this study, the non-destructive computed tomography was adopted to observe the density profile of the needle-punched Carbon/Carbon(C/C) composites nozzle throat. The density profile of C/C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• 한국지형공간정보학회:학술대회논문집
• /
• 2003.09a
• /
• pp.151-155
• /
• 2003

본 연구에서는 비측량용 디지털 비디오 카메라를 이용하여 석조문화재인 석탑을 대상으로 하여 촬영에 대한 오류를 사전에 검사할 수 있을 뿐만 아니라 재촬영을 하지 않도록 하였으며, 문화재 정밀 측량에 있어서 기대할 수 있는 양호한 정확도를 얻을 수 있었다. 차후 문화재 원형 보존에 대한 계획의 수행에 있어서 문화재에 대한 자세한 정보를 제공하기 위해 효율적이고 경제적인 방법을 제시하고자 한다.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.730-734
• /
• 2009

The ottonello method is used to see a front view image of cervical 1-7 number. The study found a systematic examination method to find a better image through an experiment using metronome. The results are as follows: In an evaluation of MTF, when used 0.5 standard of MTF, oral explanation resulted 1.2 LP/mm, Moderato-100 1.4 LP/mm, Allegro-138 1.6 LP/mm, Presto-184 2.4 LP/mm. Among them presto-184 showed the highest sharpness with 2.4 LP/mm. In an image reading by a medicine doctor of radiology, when oral explanation was 17%, Moderato-100 15%, Allegro-138 18%, Presto-184 50%. Among themprest-184 was evaluated as the best image. The result of was a method to reduce an image repeat, patients radiation exposure, patients waiting time for examination, material and so on.

• Proceedings of the Korean Society of Radiological Science
• /
• 1989.06a
• /
• pp.85.1-85.1
• /
• 1989

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.469-474
• /
• 2005

Tn this study, the noll-destructive computed X-ray tomography was adopted to observe the density distribution of the needle-punched C-C composites nozzle throat. The density distribution of the C-C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of the C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.16 no.1
• /
• pp.103-112
• /
• 1986

The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group Ⅰ: Bisecting-angle technique with patient's fingers. Group Ⅱ: Bisecting-angle technique with Rinn Snap-A-Ray device. Group Ⅲ: Paralleling technique with Rinn XCP instrument (short cone) Group Ⅳ: Paralleling technique with Rinn XCP instrument (long cone) The most frequent cause of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group Ⅰ: Incorrect film placement(47.8%), upper canine region, and 0.89 Group Ⅱ: Incorrect film placement (44.0%), upper molar region, and 1.12. Group Ⅲ: Incorrect film placement (79.2%), upper molar region, and 2.05 Group Ⅳ: Incorrect film placement (67.7%), upper molar region, and 1.69. The average number of retakes per complete mouth survey of paralleling technique (Group Ⅲ＋Ⅳ) was higher than that of bisecting-angle technique (Group Ⅰ ＋ Ⅱ) (p<0.01). There was no difference between Group Ⅰ and Group Ⅱ, and between Group Ⅲ and Group Ⅳ in the average number of retakes per complete mouth survey (p>0.05).

• Korean Journal of Heritage: History & Science
• /
• v.26
• /
• pp.211-230
• /
• 1993

• Journal of The Korean Radiological Technologist Association
• /
• v.29 no.1
• /
• pp.111-112
• /
• 2003

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.117-118
• /
• 2018

드론의 활용은 점점 더 다양해지며 소규모지역에 대한 정밀 지도제작방법으로 자리매김하고 있다. 그러나, 결과물의 요구정확도의 예측이 불가능하므로 종종 촬영계획을 수정하여 재촬영할 경우가 종종있다. 촬영지역의 면적, 기준점 수 및 배치, 촬영고도 및 중복도에 대한 다양한 정확도 분석이 이루어진다면 사전 시뮬레이션을 통하여 원하는 정확도의 결과물을 얻을 수 있다. 본 연구에서는 드론측량 시 정확도에 영향을 주는 다양한 요소들을 추출하고 정확도 분석을 위한 테스트필드를 설계하고자 한다.