• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.35.2-35.2
• /
• 2005

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.39-46
• /
• 2015

A numerical study has been conducted on CO after burning and NO generation of the rocket plume as the cooling water injected to the rocket plume. The present study shows that the cooling water has a role of increasing the degree of CO after burning and reducing NO generation. However the effect varies as the injection configuration of the cooling water. When the cooling water is injected at the side of the plume, NO generation is dramatically reduced while the degree of CO after burning is relatively low. When the cooling water is injected at the side and the center of the plume, CO after burning is highly increased and NO generation is also dramatically reduced.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.698-703
• /
• 2000

The characteristics of NOx emission in reburning process have been experimentally studied. The design point of burner is creative of three distinct reaction zones; a primary flame zone that NOx producted, reburn zone to reduce the primary zone NOx and burnout zone. Liquefied Petroleum Gas(LPG) was used as main and reburn fuels. Process parameters investigated included main/reburn fuel ratio, primary/secondary air ratio, reborn fuel injector position and different designed quarl. The NOx emission characteristic of aerodynamic designed burner relied on reborn fuel ratio and was slightly affected by a reburn fuel injector position and quarl shape.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.9 s.252
• /
• pp.842-849
• /
• 2006

An experimental study has been conducted to investigate the effects of a multi air-staged burner on NOx formation and heat transfer in a 15kW large-scale laboratory furnace adopted the reburning process. The reburn fuel as well as burnout air was injected from each nozzle attached at the wall of the cylindrical furnace. Fuel in both main burner and reburn nozzle was LPG (Liquefied Petroleum Gas). The paper reports the influences on NOx reduction of reburn fuel fraction in reburning zone. Temperature distribution inside the overall region as well as total heat flux at the wall of the furnace has been measured to examine the heat transfer characteristics due to the reburning process. For comparison, the reburning effects were examined for a combustor with two types of burner; a regular single staged burner and a multi-air staged burner. A gas analysis was also performed to evaluate an appropriate condition for NOx emission in a primary zone for the excess air ratio of 1.1. As a result, combustion efficiency expected to become more efficient due to the reduction of heat loss in burnout zone decrease when multi air-staged burner in furnace adopted reburning technology was used.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.216-223
• /
• 2008

Reburning is a useful technology in reducing nitric oxide through injection of a secondary hydrocarbon fuel. In this paper, an experimental study has been conducted to evaluate the effect of fuel lean reburning on $NO_X/CO$ reduction in LPG flame. Experiments were performed in flames stabilized by a co-flow swirl burner, which was mounted at the bottom of the furnace. Tests were conducted using LPG gas as the reburn fuel as well as the main fuel. The effects of reburn fuel fraction and injection location of the reburn fuel were studied when the fuel lean reburning system was applied. The paper reports data on flue gas emissions and temperature distribution in the furnace for a wide range of experimental conditions. At steady state, temperature distribution and emission formation in the furnace have been measured and compared. This paper makes clear that in order to decrease both NOx and CO concentrations in the exhaust when the fuel lean reburning system was adapted, it is important that the control of some factors such as initial equivalence ratio, reburn fuel fraction and temperature of reburn fuel injection region. Also it shows the fuel lean reburning is also effective method to reduce NOx as much as reburning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.261-261
• /
• 2022

최근 국내 녹조현상의 빈도가 잦아지고, 지속기간이 증가하였다. 이러한 녹조현상은 이상기후로 인한 일사량, 수온, 체류시간 증가로 인한 환경적인 영향이 있으며, 산업단지 및 농지 등에서 유출되는 질소나 인의 부영양화로 인한 인위적 영향이 있다. 조류종 중 특히 남조류가 생장하는 과정에서 발생하는 독성물질(간독소, 신경독소), 이취미 물질(Geosmin, 2-MIB 등)은 수질을 악화시키고 있어 생태계에 큰 영향을 미친다. 조류는 하천에서 넓은 분포로 발생하게 되는데 현재 조류 조사 방법은 현장에 발생한 조류를 직접 채취하여 연구실에서 현미경으로 직접 검경하기 때문에 많은 인력과 시간, 비용이 소비되고 있는 실정이다. 국내에서는 인력과 시간을 줄이기 위해 센서를 활용한 조류분석 및 원격탐사 기법을 이용한 조류 모니터링에 대한 연구가 많이 진행되고 있다. 하지만 하천에서는 녹조류와 남조류 모두 혼합되어 존재하며 센서를 이용하여 조류를 분석할 시 녹조류는 Chl-a, 남조류는 Phycocyanin을 대체하여 분석하고 있다. 하지만 모든 조류는 광합성을 하기 때문에 Chl-a를 모두 함유하고 있어 Chl-a만으로 남조류를 추정하는 데에는 한계가 있다. 따라서 본 연구에서는 조류 계측장비인 LISST-HAB를 통하여 조류시료의 농도를 측정하여 Chl-a, Phycocyanin 농도를 측정하여 조류종 분류에 대한 분석을 진행하였다.

• Journal of KIISE:Software and Applications
• /
• v.29 no.12
• /
• pp.883-894
• /
• 2002

Classical deterministic testing controls the execution of concurrent programs based on the equivalence between specifications and programs. However, it is not directly applicable to a situation in which synchronization sequences, being valid but infeasible, are taken into account. To resolve this problem, we had proposed automata-based deterministic testing in our previous works, where a concurrent program is executed according to one of the sequences accepted by the automaton recognizing all sequences semantically equivalent to a given sequence. In this paper, we present the automata-based testing environment for Java multi-thread programs, and we design and implement "Deterministic Executor" in the testing environment. "Deterministic Executor" transforms a Java multi-thread program by applying automata-based deterministic testing, the transformed program presents testing results. "Deterministic Executor" uses "Automata Generator", which generates an equivalent automaton of a test sequence, and "Replay Controller", which controls the execution of programs according to the sequence accepted by the automaton. By illustrating automata-based testing procedures with a gas station example, we show how the proposed approach does works in a Java multi-threaded program.roach does works in a Java multi-threaded program.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.4
• /
• pp.203-212
• /
• 2002

This study was conducted to remove the urban heat island effects embedded in the interpolated surfaces of daily minimum temperature in the Korean Peninsula. Fifty six standard weather stations are usually used to generate the gridded temperature surface in South Korea. Since most of the weather stations are located in heavily populated and urbanized areas, the observed minimum temperature data are contaminated with the so-called urban heat island effect. Without an appropriate correction, temperature estimates over rural area or forests might deviate significantly from the actual values. We simulated the spatial pattern of population distribution within any single population reporting district (city or country) by allocating the reported population to the "urban" pixels of a land cover map with a 30 by 30 m spacing. By using this "digital population model" (DPM), we can simulate the horizontal diffusion of urban effect, which is not possible with the spatially discontinuous nature of the population statistics fer each city or county. The temperature estimation error from the existing interpolation scheme, which considers both the distance and the altitude effects, was regressed to the DPMs smoothed at 5 different scales, i.e., the radial extent of 0.5, 1.5, 2.5, 3.5 and 5.0 km. Optimum regression models were used in conjunction with the distance-altitude interpolation to predict monthly normals of daily minimum temperature in South Korea far 1971-2000 period. Cross validation showed around 50% reduction in terms of RMSE and MAE over all months compared with those by the conventional method.conventional method.

• (The)Study of the Eastern Classic
• /
• no.70
• /
• pp.211-255
• /
• 2018

A classical lyrics novel 'Jeobuin-jeon' is basically old Korean novel in aspect of contents even though it has lyrics for a song formally. In other words, it shows classic poetry but also expends its genre to novel 'Jeobuin-jeon' which belongs to Jae-yeon Park's selection, presents 'Analects' at a book cover and writes its title inside. In addition, it rewrites the story of 'Jeobuin-jeon' at the beginning that means it is novel. It is considered there might be an unclear reason why it could not be marked as an novel outside. 'Jeobuin-jeon' of Jae-yeon Park's selection helps readers grasp the novel by adding Chinese characters for additional explanation based on Korean characters depending on cases. Used words in this novel is estimated being written from the late $19^{th}$ century to the beginning of the $20^{th}$ century. 'Jeobuin-jeon' is assumed being written by woman as it emphasizes that woman should learn letters and take care of the relationship among parents-in-law, husband, sibling, servant and daughter-law. Besides, this novel intends to punish bad characters through 'Jeobuin's good manners by including afterlife-story with 'Bulddong-Aemi'. 'Jeobuin-jeon''s narration is 7 steps and it reaches the peak when 'Bulddong-Aemi' and 'Jeobuin' changes their life each other. Afterward, 'Jeobuin' meets her parents-in-law and passes the crisis. The story ends through 'Bulddong-Aemi' is punished. It is very creative by developing the story with looking back the past would make a change in narration.

• (The) Research of the performance art and culture
• /
• no.37
• /
• pp.157-186
• /
• 2018

Ulsan Soeburi song was reenacted in the 1980s based on the testimony and songs of late Choi Jae man (1987 death), the last blacksmith of the iron production plant at Dalcheon dong, Ulsan in August 1981. The purpose of this study is to analyze Soeburi song from the musical perspective based on 13 kinds of data including video in 1981, and confirm the changing patterns in the tradition process. The derived results are summarized as follows. In the results of examining Soeburi Song data in 2017, the percussion instruments consist of kkwaenggwari 2 (leading small gong 1, follow small gong 1), jing 2 (large gong 2), buk 4 (drum 4), janggu 4 (double headed drum 4), taepyongso 1 (Korean shawm 1), and Jangdan (rhythm) consists of five such as Jilgut, Jajinmori, Dadeuraegi, Deotbaegi, Jajin Deotbaegi. The vocal songs are sung accompanied by the Deotbaegi Jajin Deotbaegi (beat) of quarter small triplet time, or without accompaniment. The scale is mostly Mi La do's third note or Mi La do re's fourth note, and the range does not exceed one octave. All the cadence tones are the same as La. From the results of observing Soeburi song performance until today after the excavation in 1981, it is found that there are four major changes. First, the composition of the music is differentiated into 'long Jajin (slow fast)', and , , and are added. Second, the singing method is based on 'single cantor + multi post singers' since 1980's reenactment, and a single post singer was also specified from time to time. In addition, , which was performed in 2013, became the foundation of . Third, a melodic change of was observed. All beat structures are quarter small triplet time, but the speed gets slow, Mi La do's three notes are skeletonized to be corrected with high re and low sol, and then the characteristics of Menari tori (the mode appeared in the eastern province of the Korean peninsula) are to be clear. Lastly, the four percussion instruments such as kkwaenggwari, jing, janggu, and buk are frequently used, and depending on the performance, sogo (hand drum), taepyongso, yoryeong (bell) are also added. Jangdan played Jajinmori, Dadeuraegi, Deotbaegi and Jajin Deotbaegi from the beginning, and thereafter, the Jilgut Jangdan was added. Through these results as above, it is confirmed that at the time of the first excavation, a simple form of such as has been changed into a male labor song, the purpose of which has changed, and that the playability has become stronger and changed into a performing arts.