• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.54-63
• /
• 2022

In order to derive the success factors of a Mega-scale national project, this study conducted a questionnaire survey on experts participating in the Yongsan National Park development program to obtain critical success factors in the program definition phase. AHP analysis was performed for each category through a survey of experts participating in the definition phase of the Yongsan park development program to derive relative importance. The categories were classified into program strategy, process, and people, and the importance between categories was people, strategy, and process in that order. In addition, as for the 27 critical success factors in the program definition phase, the program manager's competency and leadership, environmental and cultural property survey planning, program management plan preparation, operation and maintenance philosophy, and integrated program office showed high priorities. Therefore, in promoting the Yongsan Park development program, we propose a strategy for selecting and focusing on the critical success factors with high priorities in the program definition phase proposed in this study.

• Journal of agricultural medicine and community health
• /
• v.47 no.3
• /
• pp.143-153
• /
• 2022

목적: 병원에서 재가 및 시설로 퇴원한 환자가 지역사회에서 건강을 유지하기 위해서는 전환기 돌봄서비스(Transitional care services)가 필요하다. 이를 위해 지역사회 내 의료서비스와 자원을 연계하는 주치의의 역할이 중요시된다. 본 연구에서는 선행연구를 바탕으로 일차진료 의사들의 환자중심성에 대한 인식을 파악하여 환자중심 기반의 서비스 제공을 위해 필요한 정책을 제시하였다. 또한 Transitional Care Service에 대한 일차진료 의사들의 인식을 확인하고 인구사회학적 요인과의 관계를 확인함으로써 서비스 우선순위를 도출하고자 하였다. 방법: 본 연구는 전국의 가정의학과, 내과, 신경과 등 노인 질환과 관련 있는 과의 전문의 자격증이 있으며 자발적으로 온라인 설문조사에 참여할 의사를 표현한 일차진료 의사 259명을 대상으로 수행되었다. 환자중심성 및 전환기 돌봄서비스에 대한 인식을 살펴보기 위해 구조화된 설문지를 개발하였으며, 조사전문업체를 통해 2019년 10월 28일부터 2019년 11월 22일까지 온라인으로 설문조사를 수행하였다. 결과: 본 연구에 대한 주요 결과는 다음과 같다. 첫째, 일차진료 의사들을 대상으로 9가지 전환기 돌봄서비스 인식에 대해 살펴본 결과 "입원 시 진단, 건강상태, 치료계획 및 결과 에 대한 설명(4.4)"과 "퇴원 후 자가 건강관리를 위한 정보 및 훈련 (4.2)"에 대한 필요성이 높게 나타났다. 둘째, 35세 이상 일차진료 의사가 34세 이하 일차진료 의사보다 전환기 돌봄서비스에 대한 인식이 높게 나타났다(F=7.3, p<0.01). 또한, 환자중심성에 대한 인식이 높을수록, 연령이 높을수록, 서울 외 지역에서 근무할수록 전환기 돌봄서비스에 대한 인식이 높게 나타났다. 결론: 본 연구에서는 일차의료를 제공하는 의료진들을 위한 교육프로그램과 지역사회에서 일차의료 의사들을 중심으로 하는 지역 연계 방안을 제시하였다는 점에서 의의가 있다.

• Clean Technology
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2010

The feasibility of clean technology to minimize the $CO_2$ emission by recycling and reuse the waste materials and energy have been studied for the cement industry. A life cycle assessment (LCA) was performed for an alternative raw material-supply method to use the molted slag as the major raw material in the cement clinker manufacturing. Using this new method, a 60% of $CO_2$ could be reduced that comes out during the decarboxylation from the cement rotary kiln. The energy-efficiency improvement and the alternative energy methods that had been determined in our previous study through the environmental assessment of cement industry were applied to the study for the reduction of $CO_2$ emission. The natural gas, one of the fossil fuels, was also used as the first choice to get the result at the earliest time by the most economic and the most efficient green technology and to switch into the carbon neutral energy consumption pattern.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.4
• /
• pp.127-138
• /
• 2022

In responding to climate change in the agricultural sector, Climate Smart Agriculture (CSA) is an approach to establish a sustainable agricultural system through comprehensive management of technology, policy, and investment. The international community is continually expanding CSA implementation, and it became more important to understand the status of the domestic agriculture system and practices that are relevant to CSA. This study explored the available CSA in domestic agricultural systems and presented the order of relative importance of CSA technology. AHP analysis is employed for the evaluation with the following criteria: productivity, marketability, adaptability, and mitigation. The relative importance is evaluated with six agricultural technologies (soil, crop management, water, energy efficiency, alternative energy, and precision agriculture) in 28 agricultural technology sectors. The results of the AHP analysis showed that 'alternative energy' was found to be a top priority among the agricultural technology sectors, and 'shallow depth drain in rice paddy' was a top priority for agricultural technology. Also, the 'marketability' in soil and water sectors, 'mitigation' in crop management, and 'adaptability' in energy efficiency and alternative energy were given higher priority. The results of this study can be used as a good source for strategic CSA preparation and application.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.172-180
• /
• 2006

This study was performed to establish new methods for hazardous substances and to develop an analytical method in specified wastes for preventing the environmental pollution caused by hazardous wastes. Therefore, the trends of international management, regulatory criteria, and items of hazardous wastes in various countries were investigated. Based on this study, target priority of new hazardous substances in specified wastes was established. An analytical method was developed using the waste standard reference materials of sludge, oil, bottom ash, etc., which contain the new hazardous substances (Ba, Be, Cr(VI), F, Ni, Sb, Se, and V). A total of 37 waste samples from the representative facilities, which are emitting new hazardous substances, were analyzed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.4
• /
• pp.707-724
• /
• 2024

Recently, Golang has been gaining attention in programming language rankings each year due to its cross-compilation capabilities and high code productivity. However, malware developers have also been increasingly using it to distribute malware such as ransomware and backdoors. Interestingly, Golang, being an open-source language, frequently changes the important values and configuration order of a crucial structure called Pclntab, which includes essential values for recovering deleted symbols whenever a new version is released. While frequent structural changes may not be an issue from a developer's perspective aiming for better code readability and productivity, it poses challenges in cybersecurity, as new versions with modified structures can be exploited in malware development. Therefore, this paper proposes GoAsap, a detection and analysis system for Golang executables targeting the new versions, and validates the performance of the proposed system by comparing and evaluating it against six existing binary analysis tools.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.81-88
• /
• 1981

The present study was conducted to investigate the status of industrial injuries through a prospective study for a year from August 1980 to July 1981. The subjects were 15 textile industries which were selected by random sampling in Daegu. The results obtained are as follows: Anual over-all incidence rate of industrial injuries was 3.3 percent and the rate showed 6.7 percent in male and 2 percent in female. The rate showed decreasing tendency with larger scale of industries. By the age group, $15{\sim}19$ age group was the highest as 49.3 percent. Age specific incidence rate of industrial injuries revealed highest as 4.7 precent among the group the group of 30 years old and over. By the years of service, 57.1 percent of the total cases belonged to the the group less than 1 year and the rate revealed increasing tendency with shorter period of service. The highest frequency of industrial injuries was observed at the point of 3 hours after the beginning of the work in a day as 18.1 percent. Frequency of industrial injuries showed highest as 20.3 percent on Monday. Frequency of industrial injuries was highest as 27.7 percent in winter time and showed 14 percent and 11.8 percent in January and August, respectively. By the cause of injuries, machinery accidents showed the highest as 39.2 percent and followed by the accidents due to striking against object as 17.8 percent, fall of ground as 16.3 percent and hand tool as 7.2 percent. Frequency of injured parts of body was highest as 43.9 percent in fingers. The frequency was much higher in upper extremities (66.9%) than in lower extremities (17.6%). By the kind of injuries, laceration wound was highestas 35.7 percent and the next was superficial injury and contusion as 35.1 percent. By the duration of treatment, most of the cases was belonged to the group less than 1 month as 79.1 percent and the duration showed prolonging tendency with larger scale of industries.

• Journal of Forest and Environmental Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 1992

This study was performed to investigate the hardness of wood related to the wood surface, sap and heartwood, early and latewood, specific gravity, annual ring width and moisture content on major Korean tree species such as Pinus koraiensis, Abies holophylla, Larix leptolepis and Quercus valiabilis. The results were summarized as follows: 1. The arithmetic mean values of wood hardness on cross section were respectively $8.0kg/mm^2$ on Quercus valiabilis, $7.4kg/mm^2$ on Larix leptolepis, $5.1kg/mm^2$ on Pinus koraiensis and $4.7kg/mm^2$ on Abies hollophylla. 2. Generally hardness of wood on cross section was greater than the others and the proportion of cross section hardness to radial was respectively 2.8 on Quercus valiabilis, 2.6 on Larix leptolepis, 3.8 on Pinus koraiensis, and 4.1 on Abies holophylla and that proportion was tend to be decrease as specific gravity increased. 3. It was recognized that the hardness of sap and heartwood was different from each of the tree species and generally heartwood hardness was somewhat greater than sapwood. 4. Generally latewood hardness with in a ring was greater than earlywood and the proportion of earlywood hardness to latewood decreased as specific gravity increased. 5. The relations between hardness of wood and specific gravity show a high positive correlation on all sample tree species. 6. The values of hardness decreased with increasing annual ring width. 7. Hardness of wood on Abies holophylla was greatest in oven dried wood and it was decreased as moisture content increased, but not changed with moisture content abve F.S.P.. The proportion of oven dried wood hardness to green are respectively 3.0 on cross, 2.4 on radial and 1.9 on tangential section.

• 한국문화재보존과학회:학술대회논문집
• /
• 2002.02a
• /
• pp.45-52
• /
• 2002

본 연구에서는 KaOH, $K_2CO_3$, Sodium, 그리고 1차 이온수 용액의 $Cl^-$ 이온 추출량과 부식생성물의 생성순위, 부식물 생성, 그리고 부식물 제거에 관하여 관찰하였으며 이 연구로 아래와 같은 결과를 얻었다. $Cl^-$ 이온 추출량에 대한 실험 결과 NaOH은 탈염 초기에는 Cl- 이온을 잘 추출시켰으나 탈염 횟수가 증가하면서 $Cl^-$ 이온의 추출량이 급감하였다. 또한 유물 중량 변화에도 감소폭이 가장 심하였다. $K_2CO_3$은 NaOH나 1차이온수 용액과 비교해 보면 이 방법은 탈염처리동안 $Cl^-$ 이온을 꾸준히 추출시켜 주었으며 다른 탈염용액에 비해 유물 중량변화가 거의 관찰되지 않았다. Sodium 용액은 $K_2CO_3$ 용액과 마찬가지로 탈염처리 동안 $Cl^-$ 이온을 꾸준히 추출시켰으며 다른 탈염 용액에 비해 $Cl^-$ 이온 추출량이 가장 많았다. 하지만 이 용액은 약품 내에 불순물인 $Cl^-$ 이온을 $3\~5\;ppm$을 기지고 있어 보존처리자가 탈염처리를 할 때 좀 더 신중하게 생각해야 할 것 같다. 1차 이온수 용액은 부식인자가 $Cl^-$이온을 완전하게 제거해주지는 못하였지만, pH가 $7.5\~7.9$로 다른 탈염 용액에 비해서 전위차가 낮으며, 별도로 탈알칼리 처리를 하지 않아도 되기 때문에 유물손상은 극소화할 수가 있다. 따라서 이 용액은 부식이 매우 심한 철제 유물이나 균열이 많은 주조 철편과 같은 유물을 처리할 때 적절한 용액이다. 부식생성물 관찰에서는 출토 철기 유물에 생성된 부식물은 주로 인철광$(\gamma-FeOOH)$, 침철광$(\alpha-FeOOH)$, 적금광$(\beta-FeOOH)$, 그리고 자철광$(Fe_3O_4)$이다. 인위적 부식에서는 전부 인철광의 부식물이 생성되었고 자연적 부식에서는 모두 침철광의 부식물이 생성되었다. 특히 철제 표면에 자연적으로 생성된 공식 녹을 XRD 분석한 결과 적금광으로 동정되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.38-49
• /
• 1986

In order to improve effectiveness of rhizobia-legume symbiotic nitrogen fixation, ecological and physiological characteristics of indigenous rhizobia distributed in Korea soil, that is, the effects of soybean cultivation, physico-chemical properties and climate on the population of indigenous rhizobia and other soil microbes were investigated. The results were summarized as follows: The population of indigenous rhizobia were ranged from $5.1{\times}10^4$ cells to $196.8{\times}10^4$ cells per gram of soil in soybean cultivated soils but from $1.6{\times}10^4$ cells to $78.6{\times}10^4$ cells per gram of soil in soybean un-cultivated soils sampled from 9 different agro-climate zone. The highest population was observed in a soybean cultivated loamy soil from southern part of Korea. The content of available phosphate, exchangeable Ca, Mg, Cu, and B in soil were positively correlated but active Fe, exchangeable Al, Na, and $SO_4$ were inversely correlated to the population of indigenous rhizobia. The inverse relationship was observed between the number of indigenous rhizobia and actinomycetes.