• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2014

The present study concerns the leachability of alkali ions from hardened cement paste in terms of an increase in the pH together with the rate of alkali leaching. To evaluate the influence of mix design on the leaching capacity and rate of alkali, different water-cement ratios (W/C) and binders were used to manufacture paste specimens. The cement paste was made in the form of rectangular bucket where deionised water was subsequently supplied as solvent media. Then the specimen was wrapped in polythene film to avoid contact to atmospheric conditions, which may affect the water chemistry in the bucket. The pH of media was monitored until no further change in the pH value was observed, of which value then used to calculate the leaching capacity and rate. The influence of binder on the pH of solvent is more dominant than that of water to cement ratio: OPC paste produced the highest level of alkali leaching, whilst 30% PFA and 60% GGBS pastes imposed lower level of alkali leaching. After the monitoring of the pH, the inner bucket was ground with an increment of 1.0 mm to measure the leaching influence using the suspension consisting of paste powder and deionised water. It was found that the impact zone for OPC was about 7-8 mm, whilst 30% PFA and 60% GGBS had deeper impact depth of the alkali leaching.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.21-29
• /
• 2022

The room-and-pillar method or grid-type underground space is a method of forming a space by excavating the excavation part at regular intervals so that it is orthogonal and using natural rock mass as a structure. Such excavation may appear different in size from the excavation stage where the maximum displacement occurs depending on the excavation direction and sequence. In this study, considering the installation of support materials such as shotcrete and rock bolts for the optimal design of the excavation process, the safety and constructability of the design and construction of the grid-type underground space under specific ground conditions were analytically reviewed. The ground conditions were set using an numerical method, and the stress at pillar and displacement at center of room were considered for each excavation stage and construction type under a constant surcharge. The height of the space was 8m, which was set higher than the size of a general office, and was reviewed in consideration of equipment and plant facilities. In addition, the degree of displacement control according to the installation of support materials was reviewed in consideration of shotcrete and rock bolts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.375-381
• /
• 2018

This study was performed to investigate the residual characteristics of the insecticide dinotefuran in asparagus under greenhouse conditions from July to August and consequentially to obtain basic data for guidelines on the safe use of this pesticide in asparagus. Residues of dinotefuran in young stem of asparagus before and after growing mother stem were analyzed from samples collected at 0, 1, 3, 5, and 7 days after single application of a commercial formulation of dinotefuran (wettable powder, 10%) at the recommended dose (2,000 times dilution). The residue of dinotefuran in young stem of asparagus was analyzed by HPLC-UVD, and recovery of dinotefuran in young stem was tested at 0.5 and 1.0 mg/kg concentrations. As a result, the limit of quantitation (LOQ) of dinotefuran was 0.01 mg/kg, and the recovery of dinotefuran was in the range of 83.3-94.0% with a coefficient of variation less than 10%. Residues of dinotefuran in young stem of asparagus before and after growing the mother stem were lower than the tentative limit (0.05 mg/kg) from 5 and 3 days after single application, respectively. Based on these results, single application of dinotefuran (wettable powder, 10%) at the recommended dose at 7 days before harvest would have no deleterious effects on safety issues concerning pesticide residue. This result might provide basic information to construct guidelines for the safe use of dinotefuran in asparagus.

• Proceedings of the Turfgrass Society of Korea Conference
• /
• 2011.02a
• /
• pp.25-32
• /
• 2011

본 연구는 화력발전의 부산물로 발생하는 석탄바닥재가 골프장 사질 토양의 개량재로 사용 적합한지를 평가하기 위해 수행되었으며, 결과를 요약하면 다음과 같다. 1. 석탄바닥재의 화학성을 분석한 결과 총질소 0.34%, 가용성 인산 $52mgL^{-1}$, 치환성 칼륨 $51mgL^{-1}$ 뿐만 아니라 소량의 치환성 칼슘과 마그네슘을 함유하고 있어 식물생육에 이롭고, 유해중금속함량은 Cd, $Cr^{6+}$, Pb, Ni, As는 $1mgL^{-1}$ 이하, Cu 농도는 $1.25mgL^{-1}$ 검출되어 토양환경보전법의 토양오염우려기준 이하이므로 석탄바닥재 재활용으로 인한 토양오염 가능성은 매우 낮은 것으로 판단된다. 2. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료의 투수계수와 유효수분함량을 측정한 결과 석탄바닥재 혼합비율이 증가할수록 투수계수는 유의성 있게 감소하고 유효수분함량은 유의성 있게 증가해 석탄바닥재가 모래 토양의 낮은 수분보유력을 개선하는 효과가 있음을 확인하였다. 3. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료를 잔디식재층으로 조성한 라이시미터에 잔디종자 파종 후 약 4개월 뒤 잔디밀도가 완전히 형성된 후에 시비 후 3일 간격으로 채취한 용탈수를 분석한 결과 1일과 4일 후에 채취한 초기 용탈수에서는 석탄바닥재 혼합비율이 높을수록 $NO_3-N$, $NH_4-N$ 및 K함량이 유의성 있게 감소했으며, 대조구에 비해 석탄바닥재 혼합비율이 높은 처리구일수록 $NO_3-N$, $NH_4-N$ 및 K함량이 용탈수 채취기간 동안 지속적으로 용탈되었다. 이 결과로 석탄바닥재가 모래 토양의 낮은 양분 보유력을 개선하는데 효과적이고 석탄바닥재처리가 대조구에 비해 오랫동안 식물 생육에 필요한 양분을 공급하는 효과가 있음을 확인하였다. 4. 골프장 그린상구조와 동일한 시험포장을 만들고 모래 토양에 석탄바닥재 10%와 20% 그리고 피트, 액시스, 이소라이트를 부피비로 10% 비율로 혼합한 시료를 잔디식재층으로 조성하고 크리핑 벤트그래스(Agrostis paulstris Huds), Penn A-4 $10gm^{-2}$을 파종한 후에 처리구별로 잔디 품질을 평가하기 위해 잔디 밀도, 뿌리길이, 색상 및 시각적 품질을 조사한 결과 석탄바닥재 처리구는 기존에 사용하는 개량제인 피트, 액시스, 이소라이트 처리구와 동등한 잔디생육 촉진 효과가 있는 것으로 조사되었다. 5. 결론적으로 석탄바닥재는 골프장 토양의 물리적 특성과 화학적 특성을 개선하고 잔디생육에 필요한 양분을 공급하는데 효과적인 토양개량재라고 할 수 있다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2524-2532
• /
• 1999

In this paper, we present a new buffer pool management scheme designed for video type news objects to build a cost-effective News On Demand storage server for serving users requests beyond the limitation of disk bandwidth. In a News On Demand Server where many of users request for video type news objects have to be serviced keeping their playback deadline, the maximum numbers of concurrent users are limited by the maximum disk bandwidth the server provides. With our proposed buffer cache management scheme, a requested data is checked to see whether or not it is worthy of caching by checking its average arrival interval and current disk traffic density. Subsequently, only granted news objects are permitted to get into the buffer pool, where buffer allocation is made not on the block basis but on the object basis. We evaluated the performance of our proposed caching algorithm through simulation. As a result of the simulation, we show that by using this caching scheme to support users requests for real time news data, compared with serving those requests only by disks, 30% of extra requests are served without additional cost increase.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.06a
• /
• pp.233-239
• /
• 2001

최근 대부분의 회사들은 업무를 수행하는데 필요한 지식과 노하우를 공유하고 재사용하기 위하여 지적 자산 관리의 중요성을 인식하고 있다. 특히 고도로 지식 집약적인 업종이라 할 수 있는 IT컨설팅 회사에서는 지적 자산의 관리가 다른 어떤 회사에서보다 큰 중요성을 가지게 된다. 컨설팅 회사에 있어서 검증이 완료된 지적 자산의 공유 및 지능적이면서도 신속한 검색은 컨설팅 서비스의 품질과 고객 만족에 직결되는 중요한 요소이다. 따라서 대부분의 컨설팅 회사들은 자사의 지식 자산을 관리하기 위하여 많은 노력을 기울이고 있다. 본 논문의 목적은 IT 컨설팅 회사예서 관리되는 다양한 형태의 지적 자산들을 중앙 관리하여 설친 고객 사이트에 흩어져 프로젝트를 수행하는 컨설턴트들이 공유할 수 있도록 함으로써 컨설팅 서비스의 생산성과 품질들 높이고자 하는데 있다 이를 위하여 건설팅 회사에서 관리되는 모든 지적 자산의 재고를 조사하여 모델링하고 이를 쉽게 저장하고 검색할 수 있는 시스템 아키텍처를 제안한다. 제안된 아키텍처를 NT 기반에서 Index server를 이용하여 시스템으로 구현하였다 (KMSCR: A Knowledge Management System for managing Consulting Resources). KMSCR에서는 컨설턴트가 찾고자 하는 검색어를 입력하면 다양한 포맷의 (.doc, .ppt, xls, .rtf, .txt, .html 등과 같은) 결과물을 관련성이 높은 순서대로 출력해 줌으로써 컨설팅 리소스를 효과적으로 재사용할 수 있도록 도와 준다. 또한 검색 시에는 미리 등록된 키워드 뿐 아니라 본문 내의 텍스트 검색까지 가능하게 함으로써 컨설팅 리소스에 대한 보다 효과적이고 효율적인 검색을 가능하게 한다.간을 성능 평가 인자로 하여 수행하였다. 논문에서 제한된 방법을 적용한 개선된 RICH-DP을 모의 실험을 통하여 분석한 결과 기존의 제한된 RICH-DP는 실시간 서비스에 대한 처리율이 낮아지며 서비스 시간이 보장되지 못했다. 따라서 실시간 서비스에 대한 새로운 제안된 기법을 제안하고 성능 평가한 결과 기존의 RICH-DP보다 성능이 향상됨을 확인 할 수 있었다.(actual world)에서 가상 관성 세계(possible inertia would)로 변화시켜서, 완수동사의 종결점(ending point)을 현실세계에서 가상의 미래 세계로 움직이는 역할을 한다. 결과적으로, IMP는 완수동사의 닫힌 완료 관점을 현실세계에서는 열린 미완료 관점으로 변환시키되, 가상 관성 세계에서는 그대로 닫힌 관점으로 유지 시키는 효과를 가진다. 한국어와 영어의 관점 변환 구문의 차이는 각 언어의 지속부사구의 어휘 목록의 전제(presupposition)의 차이로 설명된다. 본 논문은 영어의 지속부사구는 논항의 하위간격This paper will describe the application based on this approach developed by the authors in the FLEX EXPRIT IV n$^{\circ}$EP29158 in the Work-package "Knowledge Extraction & Data mining"where the information captured from digital newspapers is extracted and reused in tourist information context.terpolation performance of CNN was relatively

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.749-754
• /
• 2021

In order to maximize the matching ratio between the scintillation pixel and the photosensor of the PET detector using a small number of photosensor, various arrays of scintillation pixels and four photosensors were used. The array of scintillation pixels consisted of six cases from 6 × 6 to 11 × 11. The distance between the photosensors was applied equally to all scintillation pixels, and the arrangement was expanded by reducing the size of scintillation pixel. DETECT2000 capable of light simulation was used to acquire flood images of the designed PET detectors. At the center of each scintillation pixel array, light generated through the interaction between extinction radiation and scintillation pixels was generated, and the light was detected through for four photosensors, and then a flood image was reconstructed. Through the reconstructed flood image, we found the largest arrangement in which all the scintillation pixels can be distinguished. As a result, it was possible to distinguish all the scintillation pixels in the flood image of 8 × 8 scintillation pixel array, and from the 9 × 9 scintillation pixel flood image, the two edge scintillation pixels overlapped and appeared in the image. At this time, the matching ratio between the scintillation pixel and the photosensor was 16:1. When a PET system is constructed using this detector, the number of photosensors used is reduced and the cost of the oveall system is expected to be reduced through the simplification of the signal processing circuit.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.222-234
• /
• 2021

Airborne-pests can be introduced into Korea from overseas areas by wind, which can cause considerable damage to major crops. Meteorological models have been used to estimate the wind trajectories of airborne insects. The objective of this study is to analyze the effect of input settings on the prediction of areas where airborne pests arrive by wind. The wind trajectories were predicted using the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The HYSPLIT model was used to track the wind dispersal path of particles under the assumption that brown plant hopper (Nilaparvata lugens) was introduced into Korea from sites where the pest was reported in China. Meteorological input data including instantaneous and average wind speed were generated using meso-scale numerical weather model outputs for the domain where China, Korea, and Japan were included. In addition, the calculation time intervals were set to 1, 30, and 60 minutes for the wind trajectory calculation during early June in 2019 and 2020. It was found that the use of instantaneous and average wind speed data resulted in a considerably large difference between the arrival areas of airborne pests. In contrast, the spatial distribution of arrival areas had a relatively high degree of similarity when the time intervals were set to be 1 minute. Furthermore, these dispersal patterns predicted using the instantaneous wind speed were similar to the regions where the given pest was observed in Korea. These results suggest that the impact assessment of input settings on wind trajectory prediction would be needed to improve the reliability of an approach to predict regions where airborne-pest could be introduced.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.365-371
• /
• 2022

In order to obtain excellent spatial resolution in the PET detector, when the detector module is designed using very small scintillation pixels, overlap occurs at the edges and corners of the scintillation pixel array in the flood image. By using a light guide, the occurrence of overlap can be reduced. In this study, after using a scintillator of 0.8 mm × 0.8 mm × 20 mm to form a 14 × 14 array, 3 mm × 3 mm SiPM pixels are combined with 4 × 4 photosensor to reduce the occurrence of overlap. The optimal thickness of the light guide used for this purpose was derived. Quantitative evaluation was performed based on scintillation pixel images of edges and corners where overlap occurs mainly in the acquired flood image. Quantitative evaluation was calculated through the interval and full width at half maximum between scintillation pixel images, and when a light guide with a thickness of 2 mm was used, the best image was obtained with a k value of 2.60. In addition, as a result of measuring the energy resolution through the energy spectrum, the light guide with a thickness of 2 mm showed the best result at 28.5%. If a 2 mm light guide is used, it is considered that the best flood image and energy resolution with minimal overlap can be obtained.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.316-323
• /
• 2011

To test the applicability of resistivity survey methods for the archaeological prospection of a large-scale tumulus, a three-dimensional resistivity survey was conducted at the $3^{rd}$ tumulus at Bokam-ri, in Naju city, South Korea. Since accurate topographic relief of the tumulus and electrode locations are required to obtain a high resolution image of the subsurface, electrodes were installed after making grids by threads, which is commonly used in the archaeological investigation. In the data acquisition, data were measured using a 2 m electrode spacing with the line spacing of 1 m and each survey line was shifted 1 m to form an effective grid of 1 m ${\times}$ 1 m. Though the 3-D inversion of data, we could obtain the 3-D image of the tumulus, where we could identify the brilliant signature of buried tombs made of stones. The results were compared with the previous excavation results and we could convince that a 3-D resistivity imaging method is very useful to investigate a large-scale tumulus.